Slammed Chevy C10 Squarebody Air Lift Install! - Bagged 1986 C10 Ep. 2
Vložit
- čas přidán 1. 03. 2022
- Like what we're wearing? Grab yourself some merch!
Salvage to Savage Gear:
www.salvagetosavage.com/shop/
Want to see some more cool builds, daily posts & giveaways? follow us on IG!
@SalvagetoSavage
------------------------------------------------------------------------------------------------------------------
This week we're getting our bagged Chevy C10 back on the road! Last time you saw this squarebody truck, we replaced the rusty cab corner that plagues all of these older C10s, and created a gorgeous C-notch cover for the bed. It's now time to address all the things that make this squarebody run! Khalel is replacing just about every gasket in this motor. While he's got it all pulled apart, he's giving our intake manifold and block a nice fresh coat of paint. The old tail gate no longer wanted to open and close, so we ordered up a new lever kit from LMC to make sure Eric will have no trouble putting anything in the bed of this truck! We also have a brand new Air Lift performance system going into this Chevy C10, along with a new air tank. The old manual system just wasn't reliable anymore, so we fitted this squarebody up with a system that will not only raise and lower this truck every time, but also has presets to make sure the truck is always sitting at a level height! With the new air ride system installed, this patina C10 is ready to hit the road again! We have a ton of other squarebody content coming for you guys as well. Our Tesla swapped C10 is going to get it's new coil overs soon to complete the push rod suspension system, and we're also super close to getting our LS swapped K10 ripping through the mud. So make sure to subscribe so you don't miss out!
----------------------------------------------------------------------------------------------------------------
Want to switch up the suspension is your car or truck? Check out Air Lift Performance!!
www.airliftcompany.com
-----------------------------------------------------------------------------------------------------------------
Want to See More S2S Madness???
Tesla Swapped C10 Pushrod Fabrication
• Tesla Swapped Squarebo...
EV C10 Custom Billet Rocker arms!
• Tesla Swapped Squarebo...
Making Custom Headlight Intakes for the Turbo Chevelle!
• Twin Turbo Headlight I...
LS Swapping the DMC12
• LS Swapped Widebody De...
6.0 Swapping a Lifted K10
• The Problem with Junky... - Auta a dopravní prostředky
I absolutely love that this channel is featuring the young talent in the shop.
Level of legitimacy 2xed with this video.
Thank you so much for the compliment! We love seeing khalel grow here!
Killer content as always, by far and above my fav channel on CZcams! Can't wait to see the DMC again!
Thanks so much! We're trying to get you guys some more on that as soon as possible!
hate to see her go, love to watch her leave. 🙌🏽🙌🏽 great job guys! 🤍🤍
No more scraping the bumper on the floor on the way out either. Not sure if that's a good thing or a bad thing though! lol
Fun video,love the new kid 🤓🇫🇷
Khalel has been with us for a few months now! This is just the first time we let him take the lead on pretty much a full episode. We're glad you like him hosting the show!
That truck is looking good 👍. That’s why I keep coming back for more content.
Love seeing you back each week! Thanks so much for the support!
Highlight of my Wednesdays! Happy hump day guys!
Glad we can help you through your week! Happy Wednesday. Hope the rest of your week is killer too!
Cool story and I love the Miami Vice style decal! It’s dope yo
We got them in our store!!
Nice to keep the car within the family,. I hope it will come back for a engine update as well. I woundered why the light was flickering in the beginning of the video, until I realized that it was your gigant ceiling fan! 😁
It was getting pretty hot that day! Sometimes the fan is a must in South Florida!
“8 out of 10” 😂 right in the feelings haha
He's still an apprentice here. We can't let it all go to his head just yet! lol
@@SalvagetoSavage oh to be an apprentice again. Very true though gotta make sure he stays humble haha good stuff as always guys
Hell yeah my brother!!
Hell to the yeah!!! Thanks for stopping in and watching!
@@SalvagetoSavage get that kid more on the camera he did a good job with that intake manifold
Thanks for the very detailed video! Big fan!!
Thanks for showing some love! We got a bunch of squarebody content coming for y'all in the future too!
Great video guys, keep em coming. Nice job as usual. I drove a clean 74 daily with this body style back in the day, great truck.
Thanks so much! We love just about any old C10. They don't make em like this anymore!
Damn thats a wrap on another great build. Nice work boys!!
Thanks so much for the support Fish! Now to get the lifted 6.0 back on the road!
I love the way she turned out!!
You did a great job on this one dude!
this video make me love even more my own white C10! great job guys!
Thank you! You can't go wrong with a C10 in any color!
Love seeing the truck in the "badflag" advertisement
That was from way back when the truck was still a shop truck here at S2S!
It looks so good! Nice work.
Thank you! Cheers!
Gotta love a C10 bagged! But this one is kinda special! Thanks for sharing guys!
Awesome, ‘Nuff said!
Thanks for watching and thank you for all the support!
@@SalvagetoSavage hey, next time I’m on your side of Florida, I’ll stop by , say hello!
By appointment of course, you guys are crazy busy!
6:46 man I lost my shit right there. So friggin funny.
It's funny cause it's true! you know that's what you're thinking when you see those trucks driving down the road! lol
La Gringa's looking sweet!
Thank so much!
Gr8 video...keepem on tha rd Squarebody Nation 💪
Thanks for the support! We love our square bodies here!
Dope!
Thank you!!
Damn those wheels are dope! This is a clean daily. I love this truck. I miss my 81 Stepside.
It took a lot of sanding to get those wheels back to white! It's always the ones you get rid of that you miss the most! Everyone at the shop has one of those cars they wish they had back!
Unfortunately, I didn’t sell her. I was on my way with friends to a Halloween party, and hit an under cover county sheriff in an 81 Ford Fairmont. It died in the road and I slid into him. Totaled my truck. I was 19ish, and I was extremely upset. I was about to lower it, and was a paycheck away from ordering my drop spindles. I got all my money from the truck, and sold my extra parts. Keep killing the content!!
I really enjoy your channel you guys are awesome and do great work 👍
Thanks so much! We really appreciate the support!
that kid is smart. very cool guys. I love it. subbed and liked...........
And he's just getting started! Thanks for following along. Hope you enjoy the rest of the content too!
Super Job Man... Khalel some great attention to the smaller details dude.. makes that intake POP. Keep on growing them skills from the best on the Tube young fella!
Thank you so much! We're trying to teach Khalel right!
NICE JOB GUYS!!
Thank you!!
Thats an awesome ride!!
It sure is!
Yea lemme get that for the Kia baby🤷🤣🤣commentary is always on point man love watching y'all. Keep on moving!
good job guys👍 , fenomenal C10 💪
Thank you!! Glad you like it!
Damn good lookin C10
Thank you!!
The single best thing I did for my BelAir was Ride Tec and bags, couldn’t drop it as much as your C-10 but yours looks really GREAT.
The ride changes completely! We've used a few Ride Tec systems so far and have loved em. Hopefully if he brings the truck back for an LS swap, we'll be able to do some suspension upgrades too!
@@SalvagetoSavage I would love to see the LS swap and the improved ride upgrades.
Definitely a sweet biuld, this truck is awesome an you guys did an amazing job. Can't wait to start my 77 stepside biuld. Do you guys have merch? That salvage to savage sticker is fire. Great video guys!
Thanks buddy. Yes we have a website where you can find our stuff. Check it out!!
nice truck
Thanks 👍
Savage
Thank you!
Love it !!
Thanks!!!
Another great job!!!
Thank you! Cheers!
Another awesome video
Glad you enjoyed it!
Best way to fix oil leaks is to paint the engine black, then they no longer show up ;)
Paint the block black, park it in the grass and stay optimistic. Cause if it's leaking, it's got oil!
I like my airlift as well but the Bluetooth function is hit or miss works with some phones but not all. Truck looks great. Love the wheel choice as well. My kids love my bagged car as well. My 4yr old loves hitting the switches and air horns
Sometimes those added features can be somewhat of a headache. And that's awesome! It's always cool when you can spark that passion in the younger generations. Especially when it's family!
Very nice!
Thanks!
Nice truck for sure
She's a survivor!
Whenever you guys wanna do a JDM car, i know a guy.
We’re down, whatcha got?
What did you guys do for paint in the cab corner after you fixed?
Discs are great! Please provide a link to the seller. Thanks
Z the front clip and move it forward to center the wheels.
What headers were on this truck , trying to find some that clear the bottom of the frame rail
How much will everything that you just did cost.. and where your shop located I have the same exact truck I really want to get fixed..thanks!
khale is big timber now, watch out A Riv he's taking over
What compressors are those?
Amazing as always, but that throttle return spring stuck into the head bolt hole instead of a bracket is cringe AF lol. :)
Shoot Khalel a message and tell him that! (but be nice, he's still young!)
👍👍
when i called air lift they said they dont make a kit for the c10! did you buy a kit?
I'm not 100% sure on how the categorize their SKU's but I think they consider a "kit" a full bolt in system with all the bags. It's been a while since we did this truck, but I believe we ordered their "air management kit", and then ordered the correct bags for our frame application.
Mike: "LMC sells a kid..."
My brain: "............wait what?!?"
😁🤪😁🤪😁🤪
Yeah nah, Inglish is not my native language. Sometimes I hear stuff that has a totally different meaning... 😇✌️
hahaha!
Please paint water pump
Lol, we did.
💪👊👋
It's on sale?
Nope! This one was a customer's truck
How much can cost something like that?
O he'll yeah BRADAS are back roping so.e vehicles AWSOME CONTENT AWSOME techs AWSOME FAB wk man 2009 r/t hemi let's go.big AL MANOA VALLEY AAALLLOOOHHHAAA
Stoked to see you back Albert! Thanks for all the support!!! Glad you like the video!
.
Bags ruin a vehicle.
To each their own….
How could a variable height suspension ruin a vehicle?
Not a fan of the wheels!!
That's ok
That’s what the customer wanted