It's quiet, it really blows, it's elegant looking, czcams.com/users/postUgkxmj9RYGCX25BElHkuWjHec-2_muyUGyCm remote is handy. Not too difficult to assemble (see below)The assembly instructions left out a few tips, IMHO (see photo for my tips)Oh, and be patient when you attach the cage halves together (last step). You might want to loosen the screw just a little bit before you start. It's awkward (don't drop it!), but you'll get it.
Following 'instructions' that came with a CED SSF16D fan, I made a complete horlicks of this job, your excellent video showed me where I was going wrong. Thanks for your time and effort
sorry about the quality (teenage son filmed it). I got this fan and thought maybe it would help others as the instructions were so poor. Hope this helps thanks for viewing.
Im so happy with this step by step instructions as my buy had none. Very grateful you made this. Im very happy with the buy but it would of been better if batteries were supplied.👌
Thank you - not the same fan, but I spent ages trying to work out how to get the rear fan guard on - then you mentioned the reverse thread on the outer locking nut - bingo - so finally got a fan built in this extremely hot weather!!!
I tell you when you have no one to help you these videos are just the best omg thank you so very much I’m stoked learning to live with out a man lol thank you you have made my day .💪💙💙💙💙💙💙💙
Thanks so much Mark for this video Your video was the only one that I could actually follow and assemble my fan I bought from target Which I couldn't understand anyway I'm a visual person Excellent thanks again Mission accomplished
Hey Markg0042 Thanks So Much for Sharing This Excellent CZcams Video, on How to Assemble a 16” Pedestal Fan! Well Done, Job Done, Thanks Again Mark, Cheers!
the knob that suppose to screw in to hold post still so pole does not move, I cant get the knob to tighten, there is a small bolt but do not know where I put it .... confused yes
I bought a similar fan from Argos , everything is fine just the head part is always facing upwards, it’s not getting even when it’s locked. Any idea please?
My flatmate bought a cheap fan,down here in NZ. I used your valuable instructions to assemble it. Everything's great....but now that it's fully assembled...I didn't lightly loosen the column tightening screw,I totally undid it. Now I can't tighten it ! Any ideas?
not sure what has gone wrong with your fan my fans are in our loft sounds like you may have a thread issue difficult to fix without actually seeing it good luck
At 3:45 how are you able to tighten up the screw without using nuts from the bottom. I am doing the same thing but it just doesn't tighten up. The screwdriver just keeps on turning in clockwise direction and doesn't stop
My fans are in my loft. The screws look like self tappers if you overtighten because the metal is thin it will strip the thread. If this is the case you could use nuts and bolts or slightly bigger self tapping screws. Hope this helps.
Thank you for this. I just bought a Powatron one and there were no instructions apart from a leaflet with safety instructions, how to turn it on and a list of pieces. .. how stupid is that!... anyhoo.. ta very much :-D
Thanks for your instructions. I’ve never bought anything before with as bad an instruction manual in all my life. My 4yr old grandson could draw the parts with better meaning than this blinking genius. Thanks again
Keep the home or office cool and comfortable with Pedestal Fan at goo.gl/IVGmQI . Built with 3 powerful aluminium blades this height adjustable fan features an extra-large oscillating head set in a sturdy cross base. Prevent the chill in the AC set too low and like the breeze of the standing fan!
It's quiet, it really blows, it's elegant looking, czcams.com/users/postUgkxmj9RYGCX25BElHkuWjHec-2_muyUGyCm remote is handy. Not too difficult to assemble (see below)The assembly instructions left out a few tips, IMHO (see photo for my tips)Oh, and be patient when you attach the cage halves together (last step). You might want to loosen the screw just a little bit before you start. It's awkward (don't drop it!), but you'll get it.
Following 'instructions' that came with a CED SSF16D fan, I made a complete horlicks of this job, your excellent video showed me where I was going wrong. Thanks for your time and effort
sorry about the quality (teenage son filmed it). I got this fan and thought maybe it would help others as the instructions were so poor. Hope this helps thanks for viewing.
mark green. Thank u very much Mark, this has been very helpful.
@markg002 You Sir have never lied. Just got a similar fan and the instructions were very poor thats how i got here. Thank you very much
Hihi kgdkh❤️❤️💋💋💖💋💖💋💖💋💖💖💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖💋💖🚭☢️🚯🚱
Thanks a lot, it really helped! 🙂👍🏾
Thanks it was helpful
Thank you for this video! You've saved one more person from melting in this heatwave!
Sophie Buckley nope.ITS THE HEATWAVE NOW *cri*
Thank you so much I couldn't get the knob over the fan blades until I watched you Thank you so much
Im so happy with this step by step instructions as my buy had none. Very grateful you made this. Im very happy with the buy but it would of been better if batteries were supplied.👌
Thanks for the explanation mark here’s an exclamation mark!!
Thats very witty. Good man
Thank you - not the same fan, but I spent ages trying to work out how to get the rear fan guard on - then you mentioned the reverse thread on the outer locking nut - bingo - so finally got a fan built in this extremely hot weather!!!
Thanks for that. I had no instructions with mine. I would have been lost without your great instructions. Cheers man.
Thanks, very helpful. Mine's a different make but basically the same complcated instructions. !!
Thank you so much... This was really helpful... Saved my life... Cheers... :)
you're a real life saver... thank you so much!
I tell you when you have no one to help you these videos are just the best omg thank you so very much I’m stoked learning to live with out a man lol thank you you have made my day .💪💙💙💙💙💙💙💙
Thank you so much for this, I got a different brand fan but still used this, it stopped a melt down and I'm greatful for that!
Thank you very much 😊
I am so grateful, I couldn't do it without your help
Happy the video helped you
Great! Was able to do this without the help of hubby. Mission accomplished!
THANK YOU SO MUCH! The instructions were unless!! Really could not of done this without your help!! :)
Thank you!!!!! Bought it today and thanks to you I have a working fan now!!!
Very helpful. Was struggling with a Chinese knock off fan with extremely poor instructions
Wow thank the lord 🙏 (& more so you 👍😁) ! Instructions deffo not wanting us to use it . Thankypu for this fan is now in use 👍
really helpful, thank you.
Thank you for your help ! The assembly instructions sheet was awful ! You save the day for me ! 😉😊 🙆
Love you mate! This really save me from the scorching summer in Australia!
Thanks Heaps mate... was great help really appreciate
Thank You So Much For Your Help ! 🖤
Thank you so much. This really did help me in assembling my new fan
Thankyou Mark closeups would have helped more but good one mate
Thanks mate.
Just wanted to say thank you so much for your help l dent know how to put this together but wean l witch the video it help me thank you
thanks really help me, was watching and putting my fan together 👌from uk 👏👏👏👏👏👏👏👏👏👏👏♥
Thank you for this video it helped even though the fan I was trying to assemble was nestech ... it was identical to this fan except for the name
Thanks I just fixed my fan :)
Thanks so much it wasn’t until I watched this that I found the internal tube!!
Thanks so much Mark for this video Your video was the only one that I could actually follow and assemble my fan I bought from target
Which I couldn't understand anyway
I'm a visual person
Excellent thanks again
Mission accomplished
Video was a great help
Thank you 😊
Thank you ❤so much
Thanks so much for loading this instructional, it has been so helpful for me - great video, thanks
Thank you so much for this quick assembling it’s really handy 😊👌👌👌
Hey Markg0042 Thanks So Much for Sharing This Excellent CZcams Video, on How to Assemble a 16” Pedestal Fan! Well Done, Job Done,
Thanks Again Mark, Cheers!
Thank you for the video!!!
Cheers mate, the instructions in the manual did not make much sense, much appreciated.
Thank you very helpful
Thank you for the video. Helped a lot today.
That's was really helpful sir, thank you
Thank you very much 🙏
You just helped me thank you
This was so helpful! Thanks!!
the knob that suppose to screw in to hold post still so pole does not move, I cant get the knob to tighten, there is a small bolt but do not know where I put it .... confused yes
Life saver , thank you so much
I bought a similar fan from Argos , everything is fine just the head part is always facing upwards, it’s not getting even when it’s locked. Any idea please?
not sure what you mean. But to adjust fan head loosen off butterfly nut set to position and tighten.
Great vid
My flatmate bought a cheap fan,down here in NZ.
I used your valuable instructions to assemble it.
Everything's great....but now that it's fully assembled...I didn't lightly loosen the column tightening screw,I totally undid it.
Now I can't tighten it !
Any ideas?
not sure what has gone wrong with your fan my fans are in our loft sounds like you may have a thread issue difficult to fix without actually seeing it good luck
It was really helpful, Thank you
Ty for the tut
Cheers mate. Got stupidly confused with the cup thing tried to attach it to the fan blade :/
glad that it helped you. lets hope we get lots of hot weather so you can put it to good use.
I did it, thanks :)
Thank you!
Thank you so much
At 3:45 how are you able to tighten up the screw without using nuts from the bottom. I am doing the same thing but it just doesn't tighten up. The screwdriver just keeps on turning in clockwise direction and doesn't stop
My fans are in my loft. The screws look like self tappers if you overtighten because the metal is thin it will strip the thread. If this is the case you could use nuts and bolts or slightly bigger self tapping screws. Hope this helps.
markg0042 I THOUGHT YOU MEANT THE PEOPLE WHO WACTH YOU ARE IN YOUR LOFT LMFAOOO
Merci !
The bottom bit does not cross over. They are not designed to fit.
Thanks
Mine already has the thingmabobjigger on so I can't remove it to put on the fan
Bichael Stevens LMAO SAME
@@aalima2519 I got it off after an hour of wrestling
Thank you for this. I just bought a Powatron one and there were no instructions apart from a leaflet with safety instructions, how to turn it on and a list of pieces. .. how stupid is that!... anyhoo.. ta very much :-D
Thanks for your instructions. I’ve never bought anything before with as bad an instruction manual in all my life. My 4yr old grandson could draw the parts with better meaning than this blinking genius. Thanks again
I think you should rerecord this. And get your son to turn the phone side on and show close ups of the items. Il
Keep the home or office cool and comfortable with Pedestal Fan at goo.gl/IVGmQI . Built with 3 powerful aluminium blades this height adjustable fan features an extra-large oscillating head set in a sturdy cross base. Prevent the chill in the AC set too low and like the breeze of the standing fan!
been a hour cant do it ...