They should stop describing barrels as being able to shoot "X" number of rounds before wearing out, and tell people it would cost them $25,000 of ammunition to do so instead.
price of something can change daily. with that said, surely it can’t be that hard to punch in some numbers into your calculator and do the math yourself
BINGO! Most fear purchasers will never run more than a few mags through them. They only have them as security blankets, although many are even unfamiliar with the battery of arms of their own guns. I have a friend who owned an AR-15 for a year without knowing what the forward assist did.
I'm about 5-6 thousand rounds in on my MP15 and there hasn't been a single issue it takes 10's of thousands of rounds and the first things are to go are the bcg and the barrel but I have a spare upper from PSA $250 and a nickel boron bcg put into my Smith so I still have the S&W milspec BCG as a back up
Agreed. “Entry level” rifles can be modified and updated ad nauseam. If ammo were super cheap, it might be different, but the average Joe’s biggest expense will be feeding the beast.
It was between the Ruger and the S&W for me. Went with the S&W. Both were same price. No real reason. I would have been as happy with the Ruger. And I have 3 Ruger pistols. They're great.
My first AR-15 is a 16" Diamondback. Got it for like 630 out the door. It absolutely shocked me how well it runs for the price versus other rifles twice the price
I got a Diamondback as well this gun is very well made even though I got the carbine length I changed the A2 bird flash hider into a BCM comp, changed the gas block to Geissele because they come over gassed, changed the charging handle to a BCM gunfighter, changed the grip to BCM, changed the milspec trigger to Geissele 2stage, changed the buffer spring and buffer to Geissele H2,and changed the BCG to a spikes tactical, this gun shoots flatter than a Chevy flatbed I’ll put it up against the best out there.
I got the M400 Tread 3 years ago. Fantastic rifle and the ambi features are great as I'm blind in my right eye. The handguard is something I replaced. I swapped it with the 15" Sig handguard with mlok/heat relief slits down the entire length as opposed to the factory handguard which gets really hot after 4 or so mags. Aside from that, a great entry level AR. It's a very accurate and reliable firearm.
@@fliporphil1335 I have both the Ruger and the Sig and I like them both. Both will out shoot most people’s capabilities. The Ruger is more ready to go in my opinion. The Sig trigger is terrible compared to the Ruger as well as the handguard. If Ambi controls is the selling point you can easily add ambi controls to the Ruger (I used CMMG ambi controls) Honestly, you will likely be happy whichever way you go. Just saying you likely will find you don’t like the Sig handguard or the trigger..
My first AR, S&W M&P-15 Sports II. It’s now my oldest and it still as reliable as ever. I’ve now moved on to my Daniel Defense DD MK12 and DDM4V9 and my FN Military Grade M-16A4 but that S&W still rocks and I would recommend it to anyone looking to get into the AR game.
My first also and M&P 15 Sport !!, love it, when I get out of Cali I will look into others, but this does that job, and my wife loves it and said she wants it when I get a new one.
Money doesn’t ALWAYS equal quality. At the end of the day all of these rifles probably have a phosphate coated milspec BCG.. which is reliable enough for any average shooter. You can invest a slight amount of money to the heart of any “cheaper rifle” and instantly becomes a whole lot more robust. You can get an upgraded BCG and or barrel(realistically the 2 most important parts) for $150 ish each. depending on budget of course. Still putting you under a thousand total. Just take into account how often and in what application you’ll be using your rifle. At the end of the day without proper training and hundreds to thousands of rounds through any system, that $550 rifle is the same exact firearm as a Gucci $4000 rifle.
I shopped for a while before buying the Zion-15. I shot a lot of rifles at the range before choosing it, but when I picked it up and shouldered it, I knew I wanted it. After firing a few mags through it, I was completely hooked. I put an O ring between the upper and lower, and now it shoots like a much more expensive rifle. A friend with a Daniel Defense AR-15 was blown away when he shot the same group with my Zion at 100yds.
DD just may well be the most over priced AR 15 on the market. BCM FTW!!! Best value is is a home built AR15 with at least 50% BCM parts and accessories.
I bought my first AR a month ago. Went with the Ruger 556, I love how it feels, great for a chill day at the range. Honestly super happy to know I picked good as someone who had no idea what I was looking for in my first rifle
Check out a db15 (Diamondback) next if you want to grab one cheap. I bought one to test it out and I absolutely love it. Put around 250 rounds through it the first day and it did amazing.
It’s a tie between best entry ARs for me….M&P Sport ll and the Ruger AR-556. I don’t even think they should be labeled as entry ARs. They are both awesome and run like Champs. Got em both.
It's a popular thing in the gun culture to hate on M&Ps for some reason. I've served in the Army, shot all kinds of guns, own a few myself and some of my most reliable are my M&P Shield and Sport II. They are perfect for entry level.
Having built 5 PSA rifles in 3 calibers, they are my go to source for all things AR! You can build the highest quality rifle with the components of your choice for less than $1,200 or buy the complete upper and lower of your choice for under $600. The reason he doesn’t mention PSA is probably because PSA sells directly to the customer and he can’t sell them.
Yeah I was going to say. The only reason PSA isn’t number 1 with their resilience proven, lifetime warranty ar15’s is because PSA cuts out the middle men / gougers.(same thing)
The owner of PSA has talked about the goal of their company being to make affordable firearms for the purpose of arming as many people as possible so they can utilize their 2a rights. I try to buy from them to help support their goal.
I started out with AR's about 7-8 yrs ago. Took a class at my LGS on building lower receivers. Started buying kits from PSA (Palmetto State Armory)and built probably 10-12 in 5.56x45 and a couple in 7.62x39(including AR pistols). Bought an ATI 9mm ar pistol and an Armalite AR10. But as far as AR "15's", I'm perfectly happy with EVERYTHING I'm bought from PSA (including my Dagger). I had "1" problem with a PSA upper about 3-4 yrs ago and it was handled quickly and professionally. They took care of everything and I had it back in "6" days. I consider that "Great Service". Veteran owned and operated and committed to putting quality firearms in the hands of as many Law Abiding American Citizens as possible. You can put together a PSA AR for about $500. But I am starting to pick up a couple of Nickel Boron BCG's. And personally, "I" prefer the A2 front sight post. There's NO Prolem running an optic plus you have the bayonet lug. (I have bayonets)
Wish i could say the same. Every built by PSA gun I have came to me with some sort of issue. Loose bolts, fitment, machine marks on bcg's , scratches , rattling .
I have 3 of them and have had zero issues with them. Got them on sale at my local dealer for 350.00 ea. 2 are bone stock works great 1 has a cmc drop in single stage trigger, Bravo co bolt carrier, Areo precision 14.5 barrel with a pin and weld epsome flash hider, strike industry 60 ambi safety selector, Trijicon TA11 ACOG, piggy back Holoson 507c. I have poured a few 1000 rounds thru it and it is a flawless weapon and also the most expensive 350.00 rifle around,LOL
My M&P Sport 15 came with factory installed MagPul hardware and a Crimson Trace Red Dot sight. It did not have the old style sight that was on the model that you displayed. I’m pleased with it.
I bought my Ruger 556 a few years ago. It was less than $600, out the door back then. I bought a Sightmark Wraith night vision scope for just under $500 to put on it and had a gunsmith do some fine tuning on the trigger. There are quite a few coyotes that have met their maker with this set up. No regrets, no failures, and quite accurate.
my first AR was a smith/wesson M&P. Paid just under $600 for it back in 2018. Its a decent rifle for what it is. Ive since built all the rest of the ones I have but I still have that one.
That's what I did back in 2020 during the damdemic. My first one, total greenhorn. Paid about $750 but it had a CT red dot. Pulled it out the box and started shooting a beer can at about 80 yards freehand and it was spot on LOL! Would like to build my next, any advice? I've been looking at the kits that PSA has. I just don't have enough experience to piecemeal one together, buying from different sources...yet.
With your current knowledge would you go back in time and choose to build your first rifle? I’m looking to get my first rifle and any information is much appreciated.
@@ericadventuresafieldafloat513 PSA has some decent uppers. As for lowers, a forged lower are essentially all the same. Put CMMG, Bravo Co. (BCM), lower parts kit. As for triggers...go with a Schmid two stage....they re really nice and cost no more than $80. PSA has that trigger but under their company name. Look at the trigger shoe/bow and you'll see an "S" at the top and another S on the hammer. Yeah Giessele's are nice but do you want to spend $150 for something that's a little nicer? If you're going to go stripped Upper, I highly suggest DelTon or BCM. Because they put "Dry Film Lube" inside all their upper receivers...which is mil-spec. But many companies ignore this process due to expense. The inside of the upper will have a medium gray color to it. How you'll know it's in there. For Barrels, go with a Ballistic Advantage....most of what they call Modern Profile aka govt. profile barrels are just around a $100 and if you shoot match ammo you'll get 1 MOA. Best bang for the buck. Their performance series are going to be sub MOA. Hope this helps you out some. If it were me. I would go with a PSA upper and do the lower yourself....Oh for Buffer tubes kits...A good company is Aero as well as a lower parts kit too. Rails you personal option... .I really like and use Midwest Industries Combat rail. They are solid they use a plate that goes in between the screws to tighten the rail down. This is so you never over tighten and always torque the screws down properly. But will set you back $150 for 9.5" or longer. I always use their 12'5" rail. Need anymore help. DOn't hesitate to ask.
My MP 15 came with a crimson trace red dot and a picatiny gas block. Love that thing! Yes optic got tossed for a better one and that plastic handguard had to go immediately for a cabine length quad. But i trust my life with that rifle.
Yeah this guy is just one of those stereotypical gun guys who hate on it for no reason. They are super reliable, and they come with an MBUS sight right out the box, which saves you $200-$400 right there not needing a red dot right away. It's actually the most entry level friendly on that table. And I've shot all of those besides the Zion.
Over some years, have bought several ARs in the sub-1000 range from makers like Radical, PSA, DPMS, STAG, Springfield, and Colt. Honestly, could have just stopped buying them after my first which was a Colt. I just like trying out different brands. They all shoot fine. Most people are never going to wear out an AR by shooting it too much. Not too many real mercenaries or professional shooters out there. A lot of mall ninja types though. Market is so saturated now with ARs, it is crazy.
The Ruger AR-556MPR Was My Very First AR-15 Rifle Purchase Back in 2018!!! I Placed a Leupold VX-R Patrol 1.25-4x LPVO and a B.C.M. KAG Foregrip On It. The 18" Barrel With 5R Rifling With 77gr Match Ammo It's a Great Shooting AR For The $$$
PSA makes the best budget ARs hands down. You can even get them cheap as $400 if you buy the upper and lower separately when they're on sale, and you can get a FN CHF barrel and a rifle that rivals bcm/dd for just about 1k with their sabre series
1000% vouch for IWI Zion15. I have two. They put perform rifles double their price. Street price I paid was $769.00. Mine came with B5 furniture as well. Great value.
I bought my 2nd AR and it was the ruger 556 and it is well made and shoots great. My first was the Sig m400 (non thread) and the ruger is probably $600 dollars cheaper but honestly it shoots just as nice.
I still like the front A2 post. Years ago I bought the original S&W sport, just because of that semi retro look. Recently I changed the furniture to FDE and added an attachable carry handle with an optic on top. I really like the look and it has a Gordon carbine feel to it. I get a lot of compliments about that set up.
I'm going to have to give Aero Precision love. I love building my own Rifles and Pistols. My first was a M4E1. I had every single configuration from there, until that boating accident....
Happy with my Andersons, no problems at all. Machining marks on BCGs and inside of receivers make no difference in performance. Cheapo clamshell hand guards are extremely lightweight and do a great job of heat dissipation. Maybe I'm old school or a minimalist, but give me the basics such as iron sights, mil-spec trigger, OEM stock etc. and I'm a happy guy.
I just picked one up as my first and so far it seems like a good quality rifle. Put a raptor charging handle, vector LPVO, and some magpul accessories. So far I love it.
I've had my M&P15 II since 2020. It's reliable, uber accurate, and not "clunky" to shoot at all-- that's an exaggeration, at best. As a matter of fact, the first time I sighted it in, I was surprised at how similar it shot to my Army issued A2
Yeah , m&p makes solid products. I don't agree with this guy . I love mine even as much as my ddm4v11.
Před 29 dny+2
Well put together video but you pulling the S&W from the group I feel was wrong, I have shot my sport 2 just about every weekend for about 4 years now, with all types of ammo I can get here locally and never once any issues, it works flawlessly and the issues you mentioned are not issues for me, it’s a great entry level gun and we have to quit hating on the M&P, we have enough enemies in office right now trying to ban them all.
My first ar15 was the sig m400, i did alot of homework and saw it had a high quality barrel, it had the right gas system and free float handrail with the 1:8 twist so you can reliably shoot anything. Oddly ebough when i went to the gunstore saying i wanted my first ar, they laid a sig and the ruger on the table. So i felt validated that the guy behind the counter recommended the same lol
May I recommend the M&P 15 Volunteer series. I own one and I do so enjoy it. Edit: Don’t forget Aero Precision, they usually run around $900 alongside the Volunteer series.
Ruger MPR is awesome for the price. Bad eyes and shooting steel cased ammo and was hitting 1 MOA at 100 yards which was a totally pleasant surprise. Heavy, free floating barrel and upgraded trigger. Can't ask for more.
I had issues with my Tread after 3 mags,trigger reset problem.Sent it back,got it back, have run more than 2k rounds through it…no problem. Flawless like butter. I’m kind of a slacker when it comes to maintenance, couple drops of oil instead of total breakdown. Runs like a tank.
A few years back I got an S&W M&P15 Sport for $500 brand new. I got it just to have in case I ever NEED it or the govt tries to ban them. It shoots great, although I only have about 400 rounds through it. Takes accessories very well, and if I ever NEED it then it is right there with 6 loaded mags ready to go......
I got my first AR recently and it is an Anderson Manufacturing Utility 5.56mm NATO 16in Black Nitride Semi Automatic Modern Sporting Rifle - 30+1 Rounds it was on sale for $459.99 so with taxes it came around to be 500 bucks
I built my radical with a Romeo and Juliet red dot and 3x magnifier, GBRS sling system, ambi BCM charging handle, BCM vert grip and Qzark rail light for $1200. Runs great!
Bought my first AR for $600 now I have nearly $2000 in it. You can start with a basic gun and upgrade as you can afford it. That’s what makes AR’s so awesome
Iraq Veteran 88 ran an M&P on full auto until meltdown, to 800+ rounds, right on par with Daniel Defense if I remember correctly…not to mention you can get it optics ready. Sorry but I must disagree with you on tossing the M&P first
@@Horgler That handguard is M-Lock not stock, it's easy for attachments on it. Also, the front post with the MBUS rear sight is actually a good thing. Being able to fire and have iron sights is something all first time owners should learn. I've had batteries in red dots die on me in the Army, or just bug out and decide to be wonky. Having iron sights as a backup is never a bad thing.
My wife is a righty, I am a lefty, with an ambi setup, we can more likely get two guns and be able to pick up either one with only a stock adjustment because are different sizes.
I will say that while there might be ideal first guns, any AR that isn't actively dangerous to shoot and doesn't jam is a solid first AR, because even ones with annoyances or suboptimal parts can teach a lot. Hell, I'd even throw the PSA Freedom series in the mix, they periodically run sales where you can get a full AR for under $400 and it is perfectly cromulent as a first gun, backup gun, "I need a new bangstick, but don't want the wife to kill me" purchase, etc.
I have several PSAs. My go to is a lower PSA with a Geissele upper/hand guard with FN barrel. I mix and match PSA products with other brands and they run just fine.
I can’t wait to get my first AR. I’m familiar with pistols but ARs are a new ballgame for me so I’ve been trying to decide on one that doesn’t break the bank because it’s going to be a home defense gun and will most likely stay in the closet unless I take it to the range.
Solid options but I have a bias towards palmetto or bear creek AR's for the entry level price point. Usually come with nicer furniture at a cheaper price point and are accurate enough that the extra money you could spend on an AR can go towards ammo.
I really like the depth in the review considering pros and cons for each too. I don't think I've heard anyone talk about barrel steel and machining quality. The details like this really matter in a comparison. Straight and to the point. I'll have to check out the AR-556
Correct. Most of the budget guns get barrels from the same place. They are decent 4140 and you can get 4150 cmv from them as well. Machining, mass production receivers come from similar places as well and it comes down to the acceptable qc. Anderson is an actual OEM for the budget guns. Psa takes everything sent to them , hence all the blem deals. Others don’t want blems type 3 hardcoat contractors are different as well. Big example of that is spikes. They use a couple different shops and end up with different finishes
My first and only AR15 is the S&W Sport II. Yeh, I haven’t put a lot of rounds throught it; but, it’s actually been great so far. I did immediatley replace the handguard with a UTG setup so I could add pic rails. It has a light mount; and, I also replaced the charging handle with a Radian Raptor. On top sits an Aimpoint PRO red dot. If anything, I’d love to upgrade the platform and put that Aimpoint on something else; but, it’s been a solid reliable rifle for me. Nothing fancy; but, it works.
I built my first ar. I just finished it last week. Ended up a little under 1000 dollars with it, but I’m happy with it. It’s also my first gun so I’m not gonna change a thing on it and put it up when I get bored with it and build another one.
Then not even mention that you HAVE to buy better handguards for the sig, because the one that has on heats up like a cooking iron when using it. Also all the ones he picked you need to buy optics for, and immediately discounted the M&P that comes with them out the box.
An extraordinary, well-made presentation of quality affordable AR-15 rifles 👏🏼👏🏼👏🏼👏🏼👏🏼 Indeed, the IWI Z15 Tactical 16" (instead of the 12.5" SBR) is outstanding, of great quality, and performance, followed it by the well put together Ruger MPR 556 and the Radical Firearms RF-15, which it improved quality manufacturing throughout the years. The Sig M400 is good but odd.
I have a rf and love it. Upgrade the bolt carrier and trigger throw a good optic on it and a light. Save your money out the gate to put towards quality accessories. The bones on that gun are just fine. My man hands don't mind a barrel grip with texture 😅😅
Love my Radical Firearms AR, you can easily find them under $400 and they run great. If you're shopping for a AR under $700, don't worry about the steel the barrel is made out of, you're probably under the poverty line like me and you'll not be able to afford the amount of ammo necessary to wear out your barrel for a long while. Barrel wear is something middle class and high class people have to worry about, people who can afford dropping $500 dollars every range visit.
My first ar-15 is the LWRCI M6 DI it was pricey but it inspires so much confidence and the build quality is top notch, fluted cold hammered forged barrel sold me
Picked up a M&P 15 Optics ready in June...990 after tax and DROS in CA....didnt know anything about ARs at the time. Only ran 100 rounds so far but since upgraded to 15" drop in handguard, Magpul gen 3 BUIS, Holosun 515, Radian Raptor, Aero Enhanced buffer tube, BCM KAG, VG6 Gamma, Streamlight HL-X Pro, BFG Vickers sling, Magpul MagLink and everyone's least favorite stock, the MFT Battlelink. Might throw on a HM3X and CMMG 22LR conversion for plinking.
How’d you forget literally the best budget ar15 (palmetto state armory) which arguably out performs most of not all these guns for a cheaper price too.
Got a PSA lower sent to a local gunshop, asked the dude working his thoughts and he starts spouting off on all the problems he’s seen on them, but not on the one I ordered. He then tried to sell me a couple of his. PSA are putting hacks out of business
@@-Swamp_Donkey- I almost bought something locally, like a diamondback/delton/radical because I thought shipping and transfer fee would be outrageous. I still ended up getting the PSA rifle with Magpul sights for cheaper than I could have gotten a different one without sights.
@@-Swamp_Donkey- but I will say, the PSA upper is out of spec. I've tried to mate it with an Aero lower, and a Springfield lower, and the rear pin would only go about halfway, and then get wedged. I had to use a punch to get it back out. But luckily it fits the PSA lower perfectly.
My first AR styled rifle was a Franklin Armory M4, love that rifle it was well worth the money. I see them going for almost twice the price I originally got it for
I had one. Never shot it. Sold it. It looked just like my colt. Maybe even nicer. The guy I sold it to said it was jamming up. But I think got a new mag and it did better
Surprised to not see the Springfield Saint on the list. You can get the entry level and it includes sights. Pretty good deal. I have one and it has run great for me.
The Ruger AR556 is the best gun on that table. Cold hammer forged chrome lined 18" barrel and carrier. The Sig doesn't have it. The IWI doesn't have it. Both cost more. It's an easy choice.
I have the IWI ZION 12.5 inch pistol just like the one in the video. I think I'll keep it. Have the Romeo5 and the Juliet 3x for the optics. Fresh approach to your presentation & seems to be quite unique in a good way. Subscribed...
We're just trying different things to see what will work best for the channel! Buddy, that is an awesome optic set up! You've got to be driving nails with that thing!
@@brianstollings6416 I've also put together a 223 wylde 16inch BCA upper & a PSA minimalist lower. I installed a PSA 3.5lb match trigger in it & a 1x8x24 LPVO. Also, another BCA rightside charging in 223/556 SS 16inch & the same setup.
Ok I’ve been trying to pick which one I want and I was down to the ruger ar556 and the sig m400 tread and honestly for the price and after hearing this video I think I’ve made my choice.
I've always been into pistols since I was a kid watching them on t.v. I have and have had many pistols throughout my life. I'm 39yrs young. Well last year I got into AR15s, and believe me when I say, "It was one of the biggest mistakes I have ever made in my life.". I got bit by the bug, and now I have spent thousands and thousands of dollars on ARs, optics, flash lights & pressure pads, flip-up sights, stocks, hand guards, foregrips, pistol grips, slings, q.d. mounts, guns safes, .223 and 5.56 ammo, ammo cans, rifle cleaning kits, mats, just.........ALL KINDS OF FREEDOM!!!🤦♂️ Then came the politics. It is just terrible. 🤦♂️🤦♂️ Yessir.....that bug......it'll get cha. #JesusChristIsLord #RepentAndBelieveTheGospel
They should stop describing barrels as being able to shoot "X" number of rounds before wearing out, and tell people it would cost them $25,000 of ammunition to do so instead.
Lol that is a good idea.
But ammo prices can change, so it's good to include the round count.
price of something can change daily. with that said, surely it can’t be that hard to punch in some numbers into your calculator and do the math yourself
@@e5c32you’re not very fun at parties, are you? Why can gun enthusiasts never recognize jokes?
FACTS!
My opinion, 90% of people will never shoot enough to wear out even the cheapest of the ar15s
Honestly, you might be right. I’d still like to buy one because I like guns but I’ll use it as much as I can to go shoot at a range.
Bruh I’m buying a budget rifle you think I’m going to have enough money for ammo too 🤣
BINGO! Most fear purchasers will never run more than a few mags through them. They only have them as security blankets, although many are even unfamiliar with the battery of arms of their own guns. I have a friend who owned an AR-15 for a year without knowing what the forward assist did.
You might be on to something. Especially with the price of ammo, range trips, work, etc
I'm about 5-6 thousand rounds in on my MP15 and there hasn't been a single issue it takes 10's of thousands of rounds and the first things are to go are the bcg and the barrel but I have a spare upper from PSA $250 and a nickel boron bcg put into my Smith so I still have the S&W milspec BCG as a back up
Unless you're in the military or shooting competition, a "starter rifle" is all you will ever need.
Exactly!!
No point in spending $5,000 to buildup a high end rifle when a $500 rifle that shoots the same round can do the same thing.
Agreed. “Entry level” rifles can be modified and updated ad nauseam. If ammo were super cheap, it might be different, but the average Joe’s biggest expense will be feeding the beast.
I have the Ruger 556. No complaints whatsoever. Runs like a dream, right out of the box. Great starter AR.
It was between the Ruger and the S&W for me. Went with the S&W. Both were same price. No real reason. I would have been as happy with the Ruger. And I have 3 Ruger pistols. They're great.
Getting a second Ruger next week.
Just bought one at a gun show to feed rounds through and she’s a beauty, always happy with ruger
'Roger' on the Ruger.
I have a 16" Ruger 556. I bought it back when Beto said "Hell yeah we're going to take your AR-15's" 😂
Great rifle for the $$$
My first AR-15 is a 16" Diamondback. Got it for like 630 out the door. It absolutely shocked me how well it runs for the price versus other rifles twice the price
I got a Diamondback as well this gun is very well made even though I got the carbine length I changed the A2 bird flash hider into a BCM comp, changed the gas block to Geissele because they come over gassed, changed the charging handle to a BCM gunfighter, changed the grip to BCM, changed the milspec trigger to Geissele 2stage, changed the buffer spring and buffer to Geissele H2,and changed the BCG to a spikes tactical, this gun shoots flatter than a Chevy flatbed I’ll put it up against the best out there.
Cool
Yea I bought a few Diamondbacks the one I’ve shot is great no problems with it at all.
I have one also. It runs great and I highly recommend the diamondback db15!!! Great gun
@@sidbates3423 so basically you bought a diamondback and then built a new one 😂 (no hate here)
The Radical was my first AR. It's simple, affordable, and a great start.
I got the M400 Tread 3 years ago. Fantastic rifle and the ambi features are great as I'm blind in my right eye. The handguard is something I replaced. I swapped it with the 15" Sig handguard with mlok/heat relief slits down the entire length as opposed to the factory handguard which gets really hot after 4 or so mags. Aside from that, a great entry level AR. It's a very accurate and reliable firearm.
This is literally the path I'm going to take, last I looked it was $150 or so
@@fliporphil1335 Inflation sucks, that's for sure.
@@fliporphil1335 I have both the Ruger and the Sig and I like them both. Both will out shoot most people’s capabilities. The Ruger is more ready to go in my opinion. The Sig trigger is terrible compared to the Ruger as well as the handguard. If Ambi controls is the selling point you can easily add ambi controls to the Ruger (I used CMMG ambi controls)
Honestly, you will likely be happy whichever way you go. Just saying you likely will find you don’t like the Sig handguard or the trigger..
My first AR, S&W M&P-15 Sports II. It’s now my oldest and it still as reliable as ever. I’ve now moved on to my Daniel Defense DD MK12 and DDM4V9 and my FN Military Grade M-16A4 but that S&W still rocks and I would recommend it to anyone looking to get into the AR game.
Just picked up my first . I’m sure it will still be around for years to come
My first also and M&P 15 Sport !!, love it, when I get out of Cali I will look into others, but this does that job, and my wife loves it and said she wants it when I get a new one.
Picked up my M&P 15 sport 2 today. Heard lots and lots of good reviews bout this Ar-15. Loving it already can't wait to get to the range
You won't go wrong with the Sport II. Had mine for 4 years. Never had any issues.
Money doesn’t ALWAYS equal quality. At the end of the day all of these rifles probably have a phosphate coated milspec BCG.. which is reliable enough for any average shooter. You can invest a slight amount of money to the heart of any “cheaper rifle” and instantly becomes a whole lot more robust. You can get an upgraded BCG and or barrel(realistically the 2 most important parts) for $150 ish each. depending on budget of course. Still putting you under a thousand total. Just take into account how often and in what application you’ll be using your rifle. At the end of the day without proper training and hundreds to thousands of rounds through any system, that $550 rifle is the same exact firearm as a Gucci $4000 rifle.
I shopped for a while before buying the Zion-15. I shot a lot of rifles at the range before choosing it, but when I picked it up and shouldered it, I knew I wanted it. After firing a few mags through it, I was completely hooked. I put an O ring between the upper and lower, and now it shoots like a much more expensive rifle. A friend with a Daniel Defense AR-15 was blown away when he shot the same group with my Zion at 100yds.
DD just may well be the most over priced AR 15 on the market.
BCM FTW!!!
Best value is is a home built AR15 with at least 50% BCM parts and accessories.
Where’d you get your O ring from?
I bought my first AR a month ago. Went with the Ruger 556, I love how it feels, great for a chill day at the range. Honestly super happy to know I picked good as someone who had no idea what I was looking for in my first rifle
Check out a db15 (Diamondback) next if you want to grab one cheap. I bought one to test it out and I absolutely love it. Put around 250 rounds through it the first day and it did amazing.
Honestly that's probably one of the best entry level ar 15
Love mine. Shoots like a damn laser 🎯
Which ammo you used?
@@caligirl3000 I used 3 different brands of 556. Winchester and I don’t remember the others off the top of my head.
It’s a tie between best entry ARs for me….M&P Sport ll and the Ruger AR-556. I don’t even think they should be labeled as entry ARs. They are both awesome and run like Champs. Got em both.
It's a popular thing in the gun culture to hate on M&Ps for some reason. I've served in the Army, shot all kinds of guns, own a few myself and some of my most reliable are my M&P Shield and Sport II. They are perfect for entry level.
He speaks the truth. Loving my Ruger mpr. Runs flawless and no problems whatsoever.
the Radical is now almost 700. Also I worked at SiG, they run at 100% to pump out as many guns as they can. So no it's not just cheaper guns.
Having built 5 PSA rifles in 3 calibers, they are my go to source for all things AR!
You can build the highest quality rifle with the components of your choice for less than $1,200 or buy the complete upper and lower of your choice for under $600.
The reason he doesn’t mention PSA is probably because PSA sells directly to the customer and he can’t sell them.
Yeah I was going to say. The only reason PSA isn’t number 1 with their resilience proven, lifetime warranty ar15’s is because PSA cuts out the middle men / gougers.(same thing)
The owner of PSA has talked about the goal of their company being to make affordable firearms for the purpose of arming as many people as possible so they can utilize their 2a rights.
I try to buy from them to help support their goal.
They can do PSA FFL transfers...
What about their AKs? Are they as good?
PSA hands down for $400.
I started out with AR's about 7-8 yrs ago. Took a class at my LGS on building lower receivers.
Started buying kits from PSA (Palmetto State Armory)and built probably 10-12 in 5.56x45 and a couple in 7.62x39(including AR pistols). Bought an ATI 9mm ar pistol and an Armalite AR10.
But as far as AR "15's", I'm perfectly happy with EVERYTHING I'm bought from PSA (including my Dagger).
I had "1" problem with a PSA upper about 3-4 yrs ago and it was handled quickly and professionally. They took care of everything and I had it back in "6" days. I consider that "Great Service". Veteran owned and operated and committed to putting quality firearms in the hands of as many Law Abiding American Citizens as possible. You can put together a PSA AR for about $500. But I am starting to pick up a couple of Nickel Boron BCG's.
And personally, "I" prefer the A2 front sight post. There's NO Prolem running an optic plus you have the bayonet lug. (I have bayonets)
If you mention PSA on most ar pages you will get shot down bad. They are just fun for the general people🤷♂️
Wish i could say the same. Every built by PSA gun I have came to me with some sort of issue. Loose bolts, fitment, machine marks on bcg's , scratches , rattling .
You're ready for trench warfare!
Everyone hates on radical but to be honest I love mine. Paid 539 for it and put about 300 in upgrades in it. Got my green tips and it runs great.
No hate from this guy the rf15 runs like a champ and they went up in price significantly.
I have 3 of them and have had zero issues with them. Got them on sale at my local dealer for 350.00 ea.
2 are bone stock works great
1 has a cmc drop in single stage trigger, Bravo co bolt carrier, Areo precision 14.5 barrel with a pin and weld epsome flash hider, strike industry 60 ambi safety selector, Trijicon TA11 ACOG, piggy back Holoson 507c. I have poured a few 1000 rounds thru it and it is a flawless weapon and also the most expensive 350.00 rifle around,LOL
M&P 15 was my first love. Loving it
I doubt this guy has shot these 5 guns much. If any lol
@@tommyroberts867lol me or this guy?
@@gpsoldier9462 guy in the video
I got the radical rf-15. The exact one you showed. had it 2 years now. And still no problems
I've had mine for a few months now and it's ran beautifully. Highly recommend for a starter ar platform.
My M&P Sport 15 came with factory installed MagPul hardware and a Crimson Trace Red Dot sight. It did not have the old style sight that was on the model that you displayed. I’m pleased with it.
I bought my Ruger 556 a few years ago. It was less than $600, out the door back then. I bought a Sightmark Wraith night vision scope for just under $500 to put on it and had a gunsmith do some fine tuning on the trigger. There are quite a few coyotes that have met their maker with this set up. No regrets, no failures, and quite accurate.
I've been eyeing it & thinking of purchasing.
my first AR was a smith/wesson M&P. Paid just under $600 for it back in 2018. Its a decent rifle for what it is. Ive since built all the rest of the ones I have but I still have that one.
That's what I did back in 2020 during the damdemic. My first one, total greenhorn. Paid about $750 but it had a CT red dot. Pulled it out the box and started shooting a beer can at about 80 yards freehand and it was spot on LOL! Would like to build my next, any advice? I've been looking at the kits that PSA has. I just don't have enough experience to piecemeal one together, buying from different sources...yet.
With your current knowledge would you go back in time and choose to build your first rifle? I’m looking to get my first rifle and any information is much appreciated.
@@ashtonlinkon6437 yea I think I would. It would have cost more but it would be better quality.
I’ve never known anyone in real life who doesn’t love the front sight and run backup irons with optic, the mp15 is my favorite of these for sure.
@@ericadventuresafieldafloat513 PSA has some decent uppers. As for lowers, a forged lower are essentially all the same. Put CMMG, Bravo Co. (BCM), lower parts kit. As for triggers...go with a Schmid two stage....they
re really nice and cost no more than $80. PSA has that trigger but under their company name. Look at the trigger shoe/bow and you'll see an "S" at the top and another S on the hammer. Yeah Giessele's are nice but do you want to spend $150 for something that's a little nicer? If you're going to go stripped Upper, I highly suggest DelTon or BCM. Because they put "Dry Film Lube" inside all their upper receivers...which is mil-spec.
But many companies ignore this process due to expense. The inside of the upper will have a medium gray color to it. How you'll know it's in there. For Barrels, go with a Ballistic Advantage....most of what they call Modern Profile aka govt. profile barrels are just around a $100 and if you shoot match ammo you'll get 1 MOA. Best bang for the buck. Their performance series are going to be sub MOA. Hope this helps you out some. If it were me. I would go with a PSA upper and do the lower yourself....Oh for Buffer tubes kits...A good company is Aero as well as a lower parts kit too. Rails you personal option...
.I really like and use Midwest Industries Combat rail. They are solid they use a plate that goes in between the screws to tighten the rail down. This is so you never over tighten and always torque the screws down properly. But will set you back $150 for 9.5" or longer. I always use their 12'5" rail. Need anymore help. DOn't hesitate to ask.
My first AR was a Bushmaster. It ran great. I sold it to buy my LWRC DI but I can't say it would not have served my needs
My first was a Bushmaster too. Lost it when my house was destroyed in a wildfire. It was a great rifle.
LWRC is the right upgrade. Top notch rifles
My first was a Bushmaster carbon 15!
I got a Radical arms rf15 and have had 0 issues and love it frankly
My MP 15 came with a crimson trace red dot and a picatiny gas block. Love that thing! Yes optic got tossed for a better one and that plastic handguard had to go immediately for a cabine length quad. But i trust my life with that rifle.
It sounds like you built yours exactly like my MP15. I love mine as well, no problems. But I clean and maintenance regularly.
S&W M&P15 is a great entry level AR. Easily upgradable and dependable out of the box.
Yeah this guy is just one of those stereotypical gun guys who hate on it for no reason. They are super reliable, and they come with an MBUS sight right out the box, which saves you $200-$400 right there not needing a red dot right away.
It's actually the most entry level friendly on that table. And I've shot all of those besides the Zion.
Over some years, have bought several ARs in the sub-1000 range from makers like Radical, PSA, DPMS, STAG, Springfield, and Colt. Honestly, could have just stopped buying them after my first which was a Colt. I just like trying out different brands. They all shoot fine. Most people are never going to wear out an AR by shooting it too much. Not too many real mercenaries or professional shooters out there. A lot of mall ninja types though. Market is so saturated now with ARs, it is crazy.
The Ruger AR-556MPR Was My Very First AR-15 Rifle Purchase Back in 2018!!! I Placed a Leupold VX-R Patrol 1.25-4x LPVO and a B.C.M. KAG Foregrip On It. The 18" Barrel With 5R Rifling With 77gr Match Ammo It's a Great Shooting AR For The $$$
PSA makes the best budget ARs hands down. You can even get them cheap as $400 if you buy the upper and lower separately when they're on sale, and you can get a FN CHF barrel and a rifle that rivals bcm/dd for just about 1k with their sabre series
Can’t beat a PSA for the price.
1000% vouch for IWI Zion15. I have two. They put perform rifles double their price. Street price I paid was $769.00. Mine came with B5 furniture as well. Great value.
Aren't they awesome? I've got well over 2500 rounds through mine now, and it has been literally flawless.
How’s the upper and lower fit? Any wobble?
Where did you get it
@@ryanranard5187mine had a little wobble.
My first Ar was an M&P 15 mil spec MagPul edition. Great rifle.
I bought my 2nd AR and it was the ruger 556 and it is well made and shoots great. My first was the Sig m400 (non thread) and the ruger is probably $600 dollars cheaper but honestly it shoots just as nice.
I have several PSA AR, and they are running just fine. So far I haven't known anyone that leaves an AR as they come from stock.
I have two. One is absolute stock, but the other, not so much. I have definitely hung a chandelier in the outhouse on the other one! lol! I love 'em!
I love mine and the service I got at the store was superior. Quality Is excellent .
I still like the front A2 post. Years ago I bought the original S&W sport, just because of that semi retro look. Recently I changed the furniture to FDE and added an attachable carry handle with an optic on top. I really like the look and it has a Gordon carbine feel to it. I get a lot of compliments about that set up.
I'm going to have to give Aero Precision love. I love building my own Rifles and Pistols. My first was a M4E1. I had every single configuration from there, until that boating accident....
My only grip is their BCG's aren't the greatest...
Happy with my Andersons, no problems at all. Machining marks on BCGs and inside of receivers make no difference in performance. Cheapo clamshell hand guards are extremely lightweight and do a great job of heat dissipation. Maybe I'm old school or a minimalist, but give me the basics such as iron sights, mil-spec trigger, OEM stock etc. and I'm a happy guy.
I just picked one up as my first and so far it seems like a good quality rifle. Put a raptor charging handle, vector LPVO, and some magpul accessories. So far I love it.
I've had my M&P15 II since 2020. It's reliable, uber accurate, and not "clunky" to shoot at all-- that's an exaggeration, at best.
As a matter of fact, the first time I sighted it in, I was surprised at how similar it shot to my Army issued A2
Yeah , m&p makes solid products. I don't agree with this guy . I love mine even as much as my ddm4v11.
Well put together video but you pulling the S&W from the group I feel was wrong, I have shot my sport 2 just about every weekend for about 4 years now, with all types of ammo I can get here locally and never once any issues, it works flawlessly and the issues you mentioned are not issues for me, it’s a great entry level gun and we have to quit hating on the M&P, we have enough enemies in office right now trying to ban them all.
Not a fan of my M&P I think your review is spot on
My first ar15 was the sig m400, i did alot of homework and saw it had a high quality barrel, it had the right gas system and free float handrail with the 1:8 twist so you can reliably shoot anything. Oddly ebough when i went to the gunstore saying i wanted my first ar, they laid a sig and the ruger on the table. So i felt validated that the guy behind the counter recommended the same lol
May I recommend the M&P 15 Volunteer series. I own one and I do so enjoy it.
Edit: Don’t forget Aero Precision, they usually run around $900 alongside the Volunteer series.
Also some great options!
Volunteer are way over priced imo
@@Roger-il8iwAnd?
@@Tux7.62 therefore not a good recommendation
@@Roger-il8iwSo you don’t have any reason as to why? Are you a kindergartener?
Shut your trap.
Ruger MPR is awesome for the price. Bad eyes and shooting steel cased ammo and was hitting 1 MOA at 100 yards which was a totally pleasant surprise. Heavy, free floating barrel and upgraded trigger. Can't ask for more.
I have 2 Radical Ar-15's and they are amazing!
I had issues with my Tread after 3 mags,trigger reset problem.Sent it back,got it back, have run more than 2k rounds through it…no problem. Flawless like butter.
I’m kind of a slacker when it comes to maintenance, couple drops of oil instead of total breakdown. Runs like a tank.
My first ar was from palmetto state armory. I bought a complete upper and lower and put it together myself
I have both the ruger and the radical and they both do great. But I also would suggest diamondback, Delton and Bear Creek for a good starter ar.
A few years back I got an S&W M&P15 Sport for $500 brand new. I got it just to have in case I ever NEED it or the govt tries to ban them. It shoots great, although I only have about 400 rounds through it. Takes accessories very well, and if I ever NEED it then it is right there with 6 loaded mags ready to go......
I bought the Ruger MPR with 18" barrel. Does everything well, kind of like a Toyota.
I got my first AR recently and it is an Anderson Manufacturing Utility 5.56mm NATO 16in Black Nitride Semi Automatic Modern Sporting Rifle - 30+1 Rounds it was on sale for $459.99 so with taxes it came around to be 500 bucks
I built my radical with a Romeo and Juliet red dot and 3x magnifier, GBRS sling system, ambi BCM charging handle, BCM vert grip and Qzark rail light for $1200. Runs great!
GBRS slings are nice. BCM vert grip is my favorite. I like to shark fin cut them.
After rent I’m finally joining the club boys ☝️💯 thanks for all the great content yall do a lot for the community
I use an M&P Sport and it runs great. I’d like to try the M&P Sport II.
Sport II is my favorite rifle I own. It's just so reliable for the price point.
Bought my first AR for $600 now I have nearly $2000 in it. You can start with a basic gun and upgrade as you can afford it. That’s what makes AR’s so awesome
Have a smith and Wesson M&P Sport 2 love it
Iraq Veteran 88 ran an M&P on full auto until meltdown, to 800+ rounds, right on par with Daniel Defense if I remember correctly…not to mention you can get it optics ready. Sorry but I must disagree with you on tossing the M&P first
100% agree with you!
Toss the Ridical first...
I stopped listening when he picked the M&P first to “kick off the list”
It's not bad, but it does come off as a 2000s era AR-15 with the front post and stock handguard.
@@Horgler That handguard is M-Lock not stock, it's easy for attachments on it. Also, the front post with the MBUS rear sight is actually a good thing. Being able to fire and have iron sights is something all first time owners should learn.
I've had batteries in red dots die on me in the Army, or just bug out and decide to be wonky. Having iron sights as a backup is never a bad thing.
My wife is a righty, I am a lefty, with an ambi setup, we can more likely get two guns and be able to pick up either one with only a stock adjustment because are different sizes.
CLEAR UNDERSTANDING OF THESE SYSTEMS AND A LIKABLE GUY 👦 GOD BLESS YOU SIR.
I will say that while there might be ideal first guns, any AR that isn't actively dangerous to shoot and doesn't jam is a solid first AR, because even ones with annoyances or suboptimal parts can teach a lot. Hell, I'd even throw the PSA Freedom series in the mix, they periodically run sales where you can get a full AR for under $400 and it is perfectly cromulent as a first gun, backup gun, "I need a new bangstick, but don't want the wife to kill me" purchase, etc.
I have several PSAs. My go to is a lower PSA with a Geissele upper/hand guard with FN barrel. I mix and match PSA products with other brands and they run just fine.
I just purchased a PSA 11.5" with brace that old school. With the carry handle/rear sight. Only cost $500. Bought for fun and pleased with it.
My S&W M&P came with a red dot. About to put a magpull Mlok handguard on it. It's perfect.
one year at
Least 600 rounds practice seriously needed I suggest
Bear creek arsenal ,the best bang for the buck by far
Got a PSA to learn on and upgrade stuff. PSA is the Squier of ARs.
I can’t wait to get my first AR. I’m familiar with pistols but ARs are a new ballgame for me so I’ve been trying to decide on one that doesn’t break the bank because it’s going to be a home defense gun and will most likely stay in the closet unless I take it to the range.
M&P Sport 2 you wont be dissapointed.
Solid options but I have a bias towards palmetto or bear creek AR's for the entry level price point. Usually come with nicer furniture at a cheaper price point and are accurate enough that the extra money you could spend on an AR can go towards ammo.
I really like the depth in the review considering pros and cons for each too. I don't think I've heard anyone talk about barrel steel and machining quality. The details like this really matter in a comparison. Straight and to the point. I'll have to check out the AR-556
Correct. Most of the budget guns get barrels from the same place. They are decent 4140 and you can get 4150 cmv from them as well. Machining, mass production receivers come from similar places as well and it comes down to the acceptable qc. Anderson is an actual OEM for the budget guns. Psa takes everything sent to them , hence all the blem deals. Others don’t want blems type 3 hardcoat contractors are different as well. Big example of that is spikes. They use a couple different shops and end up with different finishes
My first was a Core AR. It's both American and military made. It has a lifetime warranty, I love it.
I went Del-ton. Because 1in9 twist. I was looking at S&W, but wanted midlength gas. Guns been great.
I choose IWI 12,5. Instaled SSA-E from giessle, mbus3 from magpul and couldn't be more happier.
My first ever AR I built from Palmetto State armory thing has been the most reliable thing I’ve owned, and I put some goodies on it pulse it was cheap
My first and only AR15 is the S&W Sport II. Yeh, I haven’t put a lot of rounds throught it; but, it’s actually been great so far. I did immediatley replace the handguard with a UTG setup so I could add pic rails. It has a light mount; and, I also replaced the charging handle with a Radian Raptor. On top sits an Aimpoint PRO red dot. If anything, I’d love to upgrade the platform and put that Aimpoint on something else; but, it’s been a solid reliable rifle for me. Nothing fancy; but, it works.
Top notch filming and reviewing! You guys are doing great!!
Thank you sir!
Some great points - things I would never have thought of. Looking for my first AR. Thank you.
Let's not forget bear Creek arsenal. Awesome gun for the money!
I built my first ar. I just finished it last week. Ended up a little under 1000 dollars with it, but I’m happy with it. It’s also my first gun so I’m not gonna change a thing on it and put it up when I get bored with it and build another one.
The grwm beginning was hitting 😂😂😂
I went Zion didn't need to but couldn't resist putting my little personal touch to it.. I'm not gonna lie it's just badass and sexy as hell...
Of course he would pick the two most expensive AR’s on the table
Then not even mention that you HAVE to buy better handguards for the sig, because the one that has on heats up like a cooking iron when using it.
Also all the ones he picked you need to buy optics for, and immediately discounted the M&P that comes with them out the box.
My ruger had the worst trigger of any ar-15. Had to install the upgrade 452 and changed out the BCG Coponents. Now it's sweet!😊
IWI top choice, second would be smith. You have to learn the irons if the optic fails. The springfield sa-16 is a good choice.
An extraordinary, well-made presentation of quality affordable AR-15 rifles 👏🏼👏🏼👏🏼👏🏼👏🏼 Indeed, the IWI Z15 Tactical 16" (instead of the 12.5" SBR) is outstanding, of great quality, and performance, followed it by the well put together Ruger MPR 556 and the Radical Firearms RF-15, which it improved quality manufacturing throughout the years. The Sig M400 is good but odd.
I have a rf and love it. Upgrade the bolt carrier and trigger throw a good optic on it and a light. Save your money out the gate to put towards quality accessories. The bones on that gun are just fine. My man hands don't mind a barrel grip with texture 😅😅
Love my Radical Firearms AR, you can easily find them under $400 and they run great. If you're shopping for a AR under $700, don't worry about the steel the barrel is made out of, you're probably under the poverty line like me and you'll not be able to afford the amount of ammo necessary to wear out your barrel for a long while. Barrel wear is something middle class and high class people have to worry about, people who can afford dropping $500 dollars every range visit.
True facts
Thank you for sharing your insight. I will hold on to this advice
Not any more, they've gotten greedy so they won't get my initial business.
@@ChatGPT1111 How have they gotten greedy?
@@morrius0757 Raised their prices by 50%, about double what others have in the past year.
Love the Radical 5.56. Awesome gun
My first ar-15 is the LWRCI M6 DI it was pricey but it inspires so much confidence and the build quality is top notch, fluted cold hammered forged barrel sold me
Picked up a M&P 15 Optics ready in June...990 after tax and DROS in CA....didnt know anything about ARs at the time. Only ran 100 rounds so far but since upgraded to 15" drop in handguard, Magpul gen 3 BUIS, Holosun 515, Radian Raptor, Aero Enhanced buffer tube, BCM KAG, VG6 Gamma, Streamlight HL-X Pro, BFG Vickers sling, Magpul MagLink and everyone's least favorite stock, the MFT Battlelink. Might throw on a HM3X and CMMG 22LR conversion for plinking.
How’d you forget literally the best budget ar15 (palmetto state armory) which arguably out performs most of not all these guns for a cheaper price too.
This channel is run by a gun shop, who is trying to sell you something. They're not going to recommend a rifle if they can't make money off of it.
Got a PSA lower sent to a local gunshop, asked the dude working his thoughts and he starts spouting off on all the problems he’s seen on them, but not on the one I ordered. He then tried to sell me a couple of his. PSA are putting hacks out of business
@@-Swamp_Donkey- I almost bought something locally, like a diamondback/delton/radical because I thought shipping and transfer fee would be outrageous. I still ended up getting the PSA rifle with Magpul sights for cheaper than I could have gotten a different one without sights.
@@-Swamp_Donkey- but I will say, the PSA upper is out of spec. I've tried to mate it with an Aero lower, and a Springfield lower, and the rear pin would only go about halfway, and then get wedged. I had to use a punch to get it back out. But luckily it fits the PSA lower perfectly.
My first AR styled rifle was a Franklin Armory M4, love that rifle it was well worth the money. I see them going for almost twice the price I originally got it for
They’re all solid options, in my opinion the Zion 15 is the best for its price point
Which one is more appealing to you: Radical RF-15 or Dal-Ton15?
Those Zion 16s can be found in the 750 range if you wait for a sale.
Radical started to make all their parts in house now so thats why they are now starting at 750-850 now but way better quality now.
I think the M400 is a great looking and well built!
I have the Sig M400 and I love it. Definitely nailed it on this list! Great rifles!
I had one. Never shot it. Sold it. It looked just like my colt. Maybe even nicer.
The guy I sold it to said it was jamming up. But I think got a new mag and it did better
@@brandondane4777probably used a crap mag
Still loving it? People say it runs really hot. I really want one, but unsure.
Surprised to not see the Springfield Saint on the list. You can get the entry level and it includes sights. Pretty good deal. I have one and it has run great for me.
You can get a PSA saber for $799 and a PSA basic for $499. Love my saber
The Ruger AR556 is the best gun on that table. Cold hammer forged chrome lined 18" barrel and carrier. The Sig doesn't have it. The IWI doesn't have it. Both cost more. It's an easy choice.
is it chrome lined? I couldn't find any info on that. Hell I never heard of a 4140 chf, I assumed they would all be 4150
@@khann844 The barrel on my Ruger AR556 is Cold Hammer Forged, but not Chrome lined. 1/8 Twist.
For me the IWI is the way to go everything you need and nothing you don’t and it just works every time
I have the IWI ZION 12.5 inch pistol just like the one in the video. I think I'll keep it. Have the Romeo5 and the Juliet 3x for the optics. Fresh approach to your presentation & seems to be quite unique in a good way. Subscribed...
We're just trying different things to see what will work best for the channel! Buddy, that is an awesome optic set up! You've got to be driving nails with that thing!
Middlengh gas system?
@@berz_an_gerz yes, mid length.
That’s nuts. I have that exact same setup but on a 16” Zion. Really is a great rifle.
@@brianstollings6416 I've also put together a 223 wylde 16inch BCA upper & a PSA minimalist lower. I installed a PSA 3.5lb match trigger in it & a 1x8x24 LPVO. Also, another BCA rightside charging in 223/556 SS 16inch & the same setup.
Ok I’ve been trying to pick which one I want and I was down to the ruger ar556 and the sig m400 tread and honestly for the price and after hearing this video I think I’ve made my choice.
I've always been into pistols since I was a kid watching them on t.v. I have and have had many pistols throughout my life. I'm 39yrs young. Well last year I got into AR15s, and believe me when I say, "It was one of the biggest mistakes I have ever made in my life.". I got bit by the bug, and now I have spent thousands and thousands of dollars on ARs, optics, flash lights & pressure pads, flip-up sights, stocks, hand guards, foregrips, pistol grips, slings, q.d. mounts, guns safes, .223 and 5.56 ammo, ammo cans, rifle cleaning kits, mats, just.........ALL KINDS OF FREEDOM!!!🤦♂️ Then came the politics. It is just terrible. 🤦♂️🤦♂️ Yessir.....that bug......it'll get cha.
#JesusChristIsLord
#RepentAndBelieveTheGospel