The little white piece that you questioned it's use is for letting the water out of the pool. You have a plug that opens, and that white piece attaches to the pool and then a hose, which will direct the water away frim your home.
I like how you move through the material / information Quickly & efficiently, I can’t bare when Contributors Mosey along with small talk and “ad-lib” or useless banter, I’m sure most viewers are looking for tips/ info & resume the task at hand. Which is why I subscribed & liked the video, too much downtime or needless delay can derail project completion. Keep up the efficient videos 👍🙂
I bought the pump second hand, no instructions, from what I read, they wouldn’t have helped anyway! Thank you for this video it was amazing! Can anyone explain the air / debris valves? Why and when.
You remind me of myself all excited when I erect a new pool. I live for the water. Prefer the ocean but I'll settle fir a pool. One minor critique: those 3 black hat deals...those are meant to be used inside when everything is assembled. You can use screw the guards off of the outlet and inlet hoses (2 out, 1 in) and then snap those over the circular out/in flows which allows you to disconnect your hoses, filter and all without losing water. Attempting to do this from the outside is a guaranteed loss of water, plus the pressure of the water would inevitably blow those rightboff and your pool would be just half full within am hour or so. The pool hemorrhages water quickly if all 3 are open but I don't have to sag do. You already know. I actually have a 14x42 that I'm going to adapt this filter to as the 1000 gal/hr is not available. I had to see the setup, so I get it right. Thanks for the info!
I have the same pump, same 2 return hoses but I have a skimmer. It’s been fine for years but I switched up the hoses and now I don’t know the right way. So I have one on the pump which is connected to the connector that lets the water in the pool, the pump hose is connected to the shut off T, I have the 2 hoses from return, plus the skimmer hose, I have another T joint and one extra hose. Can someone help please I’m going crazy trying to remember which T joint was the skimmer connected to. The pump is correct it’s the return hoses and skimmer that I’m confused about thank you
Got the exact same pool and wanted to make sure I was putting the pump correctly since I was going crazy trying to figure out where that same piece goes.
I just bought this pump and it did not come with all those parts and i dont know how to put it on the pool cause the holes on the pool are small... can i get some help? I want this pump how van i install it
Help my pump is not sucking in water pressure or releasing it. Pretty much is Not a pump😞☹️ any help of why is just making a low sound when is on but the hoses don’t pump the water in thru.. anybody out there that can guide me.
Good video but so people don’t get confused. What you are calling the “outlet” is the opposite. basically when you say outlet it means inlet and inlet means outlet bc the flow is to be described for the pump not the pool. This might confuse some people.
The part you weren’t familiar with I think is for draining the pool. You should be able to threat a garden hose to it so you can run your potentially salty water away from your yard.
I have never used a sand filter, but my daughter had one and loved it. This pump is a little light for the pool, ours broke after one season and we bought a more powerful one.
REALLY ... the DIRTY (possibly debris filled) water through the PUMP, BEFORE the FILTER ! ! ! this seems TOTALLY BACKWARDS and WILL KILL THE PUMP FASTER. You'd think logically that filtering the water before running it through the pump would be wise, and you would know when to CLEAN the filter when the water flow was diminished !
I have the same pump, same 2 return hoses but I have a skimmer. It’s been fine for years but I switched up the hoses and now I don’t know the right way. So I have one on the pump which is connected to the connector that lets the water in the pool, the pump hose is connected to the shut off T, I have the 2 hoses from return, plus the skimmer hose, I have another T joint and one extra hose. Can someone help please I’m going crazy trying to remember which T joint was the skimmer connected to. The pump is correct it’s the return hoses and skimmer that I’m confused about thank you
The pump should come with this video rather than the instructions they give us. Thanks for the help !
Thanks!!!
Agreed 100%!
The little white piece that you questioned it's use is for letting the water out of the pool. You have a plug that opens, and that white piece attaches to the pool and then a hose, which will direct the water away frim your home.
Ah. Thanks for that info. It was driving me nuts!
Me too the whole reason I needed to find the right video! Thanks guys!😊
Thanks, I just bought an Intex pool and have the same piece but couldn't find anything specifying what that piece goes to.
Thank you so very much for this!!! 2 years later and they are still giving the wrong instructions!
The item you did not know is to install on water hose when draining pool. Thanks for you video, would not have been able to assemble without it.
Thanks Dennis you saved me soooooo much time, confusion and tears. btw my sons name is Autzen, GO DUcKs!!!! Thank you!!!!!!😊
Great video, putting together same pool and the instructions are awful, thank you for posting this sir!
I like how you move through the material / information Quickly & efficiently, I can’t bare when Contributors Mosey along with small talk and “ad-lib” or useless banter, I’m sure most viewers are looking for tips/ info & resume the task at hand. Which is why I subscribed & liked the video, too much downtime or needless delay can derail project completion. Keep up the efficient videos 👍🙂
I don't normally comment on videos, but you resolved a lot of stress for us. Thank you!
Thank you for the help!! I was stuck!
Great video! Right to the point, explained a lot of pieces and helped them all make sense to me. I appreciate you posting this. Thank you
I had no clue what I was doing until I watched your video! Thanks for posting this
Great video that piece you said didn’t know what it is for is to add to your hose so you can drain it faster
Very very helpful, set up the whole thing in about an hour. Thank you so much
Thank you so much lmao I spent 30 minutes just trying to read that book then I said let me look for a video and I found yours thank you so much
I bought the pump second hand, no instructions, from what I read, they wouldn’t have helped anyway! Thank you for this video it was amazing!
Can anyone explain the air / debris valves? Why and when.
Great video. The instructions that came with the pump were pure garbage. Thanks to you, I was able to get the thing put together.
Those instructions are a lot different! I thought things were missing! Bless you!
Thank you sir - your explanation is the best yet ! I am following letter by letter . They need to hire you as a technical video guy!!
You remind me of myself all excited when I erect a new pool. I live for the water. Prefer the ocean but I'll settle fir a pool.
One minor critique: those 3 black hat deals...those are meant to be used inside when everything is assembled. You can use screw the guards off of the outlet and inlet hoses (2 out, 1 in) and then snap those over the circular out/in flows which allows you to disconnect your hoses, filter and all without losing water. Attempting to do this from the outside is a guaranteed loss of water, plus the pressure of the water would inevitably blow those rightboff and your pool would be just half full within am hour or so. The pool hemorrhages water quickly if all 3 are open but I don't have to sag do. You already know.
I actually have a 14x42 that I'm going to adapt this filter to as the 1000 gal/hr is not available. I had to see the setup, so I get it right. Thanks for the info!
Thank God I'm not crazy! I couldn't figure out what to do with that white piece 🤔 thanks!
Thank you!! Your video was very helpful.❤
after the install, did you go back and add a ball valve to shut the water off from the pool so you can remove the filter for the winter?
Dennis, you have no idea how much this video helped me...seriously, you're wonderful!!!! I'll be swimming within the hour thanks to you!!
I have the same pump, same 2 return hoses but I have a skimmer. It’s been fine for years but I switched up the hoses and now I don’t know the right way. So I have one on the pump which is connected to the connector that lets the water in the pool, the pump hose is connected to the shut off T, I have the 2 hoses from return, plus the skimmer hose, I have another T joint and one extra hose. Can someone help please I’m going crazy trying to remember which T joint was the skimmer connected to. The pump is correct it’s the return hoses and skimmer that I’m confused about thank you
That part is for draining the pool, you stick it in The drain hole and screw a hose to it. So the water isn’t near the pool or house etc.
do you think I could install this pump on the 12ft by 3ft tall entex pool?
I'm looking at it I think it might work fitting look to be the same size
Got the exact same pool and wanted to make sure I was putting the pump correctly since I was going crazy trying to figure out where that same piece goes.
Needed this. Lol. Thx
I just bought this pump and it did not come with all those parts and i dont know how to put it on the pool cause the holes on the pool are small... can i get some help? I want this pump how van i install it
I already installed it👍💪
you messed me up good when u said the outlet was the inlet then reversed it when u started to assemble. i'M STILL CONFUSED WHICH IS THE INLET!!
Very helpful. Thank you
Size of the tube fittings that come with the filter?
This video was so helpful! Thank you
Great explanation!!
That white device is for draining the pool if you want to winterize it.
I bought the same model, but it only came with 2 hoses and the connectors did not come
Help my pump is not sucking in water pressure or releasing it. Pretty much is Not a pump😞☹️ any help of why is just making a low sound when is on but the hoses don’t pump the water in thru.. anybody out there that can guide me.
What size your pool?
Do you have a link for that filter I bought one and it’s completed wrong
does anyone know what the “ water flow pipe “ is actually called? i need one but dont know the name of it
I'm having trouble getting the water thru the pumps
Dang that pool as tall as you!!! What pool u got?!
We have pool hoses that may fit your pool. We can provide for free. Do you need?
Good video but so people don’t get confused. What you are calling the “outlet” is the opposite. basically when you say outlet it means inlet and inlet means outlet bc the flow is to be described for the pump not the pool.
This might confuse some people.
The part you weren’t familiar with I think is for draining the pool. You should be able to threat a garden hose to it so you can run your potentially salty water away from your yard.
Should the air valve in my discharge hose leak a little water?
Nope. Should not leak at all
That white connector you don't know what is for is called a hose drain connector..!
Hi. Did you or did anyone ever figure out what the small white piece is used for?
For letting water out of the pool
it's for yr hose to connect and drain to not let yr grass get soak
would you recommend me getting a sand pump with this or keep this filter.
I have never used a sand filter, but my daughter had one and loved it. This pump is a little light for the pool, ours broke after one season and we bought a more powerful one.
@@theshackthatdennisbuilt thank you
We are having a time with our pump can you help
You skipped the only difficult part of the assembly, which is clearing the air and turning the pump on. Just wasted 15 minutes of my life
A dohicky lol
Wtf was that intro lol
Oh MY GOD....please slow down...
I've literally cried, cause you're going to fast.
Sorry!!!! I'll try to do better. Slower
@@theshackthatdennisbuilt i finally figured it out.
REALLY ... the DIRTY (possibly debris filled) water through the PUMP,
BEFORE the FILTER ! ! !
this seems TOTALLY BACKWARDS and WILL KILL THE PUMP FASTER.
You'd think logically that filtering the water before running it through the pump
would be wise, and you would know when to CLEAN the filter when the water flow was diminished !
I have the same pump, same 2 return hoses but I have a skimmer. It’s been fine for years but I switched up the hoses and now I don’t know the right way. So I have one on the pump which is connected to the connector that lets the water in the pool, the pump hose is connected to the shut off T, I have the 2 hoses from return, plus the skimmer hose, I have another T joint and one extra hose. Can someone help please I’m going crazy trying to remember which T joint was the skimmer connected to. The pump is correct it’s the return hoses and skimmer that I’m confused about thank you