Folks, I wanted to write a review on this gazebo but could not find how. Anyways, here are few tips from my experience. You can say thank you later!. 1. DO NOT put the park K as the instruction manual suggests at one point. Complete the small roof, and then put this part on the top and tighten the screws. 2. The roof installation will be easy if you use masking tape to stick the rubber parts together with the surface. When you installed every piece, just carefully remove the tape. It is the best thing that removes the frustrations. 3. While you are finishing tightening the bolts, use a black cocking substance from the tube to seal the tops of the bolts (or use your sealant). It prevents the leaking 100%. 4. Always start putting the roof parts from the middle of each side or you will regret it later because you can't reach some bolts to tight. 5. I am 70+, and I was able to put it together 99% myself. Still, I recommend at least one more person to assist you. Good luck!
I’m still building it I forgot to put the K and k1 part on the small roof and half of the bigger roof it’s been raining a lot for 2 days but the roof isn’t leaking. What is the purpose of the k part? Proper drainage or something else ?
I can’t even keep the roof up. They slide off when trying to attach and the stupid clips fall off. I’m thinking of gluing the stupid things onto the roof sections. Any advice is appreciated
If there's only 6 and 7 in each slot, 12 and 14, why do they give me 104 hooks? I really don't want to put the hooks in and get it all together and then have to take it apart to put more hooks in.
Please do yourself and DO NOT BUY THIS!!! The plastic bits that are used to slide the metal parts into place do NOT stay on the metal. I had to use some tape to tape it on and they STILL do not stay on. I live in a place where it is hot so plastic and metal are not a good combination. I tried following the instructions on the video but like I said, the plastic parts do not stick on the metal. Whoever designed this should not be an engineer. Low quality.
I put this sucker together by myself. I know why this video has no sound in fear of children hearing words that aren't in the dictionary. Curtains were worse than most of this thing. No labels telling me where to hang them. I cursed everyone who had a hand in making every part of this gazebo. Sorry for that.
Totally agree…biggest problem with these are the instructions! I wish they would use REAL pictures. The drawings suck and are not easy. Thanks for sharing your video!
Ofcourse they dont show you the ungodly frustation you encounter when putting those plastic trapezoid blocks in when on the main ribs Do not buy this is it a effin nightmare to assemble
Folks, I wanted to write a review on this gazebo but could not find how. Anyways, here are few tips from my experience. You can say thank you later!. 1. DO NOT put the park K as the instruction manual suggests at one point. Complete the small roof, and then put this part on the top and tighten the screws. 2. The roof installation will be easy if you use masking tape to stick the rubber parts together with the surface. When you installed every piece, just carefully remove the tape. It is the best thing that removes the frustrations. 3. While you are finishing tightening the bolts, use a black cocking substance from the tube to seal the tops of the bolts (or use your sealant). It prevents the leaking 100%. 4. Always start putting the roof parts from the middle of each side or you will regret it later because you can't reach some bolts to tight. 5. I am 70+, and I was able to put it together 99% myself. Still, I recommend at least one more person to assist you. Good luck!
I’m still building it I forgot to put the K and k1 part on the small roof and half of the bigger roof it’s been raining a lot for 2 days but the roof isn’t leaking. What is the purpose of the k part? Proper drainage or something else ?
I thought of that but only after it was completed lol
Pixie dust was used to hold them in place while he did the other side of the pitch.
The s1 to s5 as instructed in the book did not fit in, it is too small what should I do?
I can’t even keep the roof up. They slide off when trying to attach and the stupid clips fall off. I’m thinking of gluing the stupid things onto the roof sections. Any advice is appreciated
Also, how is this person in the video making the roof installation seem so easy?
Read my comment above for tips
I used painters tape to hold them in place as well as those pyramids from hell
thank you
Thank you
I hate those stupid plastic clips. Mine would pop off panels that were already in place! I ended up leaving some off because I got so annoyed.
If there's only 6 and 7 in each slot, 12 and 14, why do they give me 104 hooks? I really don't want to put the hooks in and get it all together and then have to take it apart to put more hooks in.
Are you referring to all Four sides or one side?
It is straightforward to insert the hooks or remove them. Don't worry. I did it yesterday with no problems.
There are extra clips in case you break them later
Ya same here. I put all 104 on is that right?
I got a mix part and can't find the contact information ?
Please contact customer service through the platform you purchased.
anyone have any answers to the curtain clip issue? Or a customer service number?
You can inquire with our after-sales customer service
@@aoxun8837what is the number?
Why is there no sound, and the video isn't even clear. Doesn't tell what part is being held
tooo much swearing.
Mine didn’t come without an instruction manual 😢
hopefully this video helps. It is a great video and the manual is shown before they do the step.
my instruction manual didn't either. did you ever find the pdf?
@@iggybadd Please contact customer service and a pdf manual will be sent to you.
Please contact customer service and a pdf manual will be sent to you.
How the freak the one dude put the whole thing together. My husband & I can get the 1st part of the roof together
Please do yourself and DO NOT BUY THIS!!! The plastic bits that are used to slide the metal parts into place do NOT stay on the metal. I had to use some tape to tape it on and they STILL do not stay on. I live in a place where it is hot so plastic and metal are not a good combination. I tried following the instructions on the video but like I said, the plastic parts do not stick on the metal. Whoever designed this should not be an engineer. Low quality.
I put this sucker together by myself. I know why this video has no sound in fear of children hearing words that aren't in the dictionary. Curtains were worse than most of this thing. No labels telling me where to hang them. I cursed everyone who had a hand in making every part of this gazebo. Sorry for that.
Totally agree…biggest problem with these are the instructions! I wish they would use REAL pictures. The drawings suck and are not easy.
Thanks for sharing your video!
Ofcourse they dont show you the ungodly frustation you encounter when putting those plastic trapezoid blocks in when on the main ribs
Do not buy this is it a effin nightmare to assemble