67D vs Bulletproof- Mounting System Compare for the Jeep Wrangler JL and Jeep Gladiator
Vložit
- čas přidán 3. 08. 2024
- Let's get to the bottom of this, what's the difference in the 67D and the Bulletproof Mounting Systems? In this video we give you an in depth view at both options. Which is BETTER??? That's for you to decide!!! We hope that you found this video helpful, if so please LIKE the video and SUBSCRIBE to the channel for upcoming videos! Also, please leave a comment with your thoughts below!
Om April 17, 2020 We're GIVING AWAY 1 of the Bulletproof Mounting System!!! (US Only)
To Enter:
Subscribe to the Channel
Comment on the Video
Bulletproof Mount Link:
amzn.to/34JUPfF
67D Rail Mount Link:
www.67d.com/collections/jl-ba...
Follow JT Mods on instagram! - Krátké a kreslené filmy
Another factor that I didn't hear mentioned here, that is very important to many of us, is the country of origin. 67 designs is designed and made here in the US. Bulletproof doesn't claim where their product is manufactured, which is a dead giveaway that it is overseas. Wether they give some profits to military organizations or not, I prefer my products to be made by a guy named John or Bob or the likes.
Thank you for taking the time to go through this so thoroughly. My husband has a 2020 Gladiator that definitely needs an adventure mount and I wouldn't even know where to start when choosing one. I appreciate this! The phone mount in my LJ is magnetic and the phone just goes flying off when we're offroad 🤣
No problem at all!!! Thanks for watching and supporting the channel! Congrats on the Gladiator!!! Good luck on the giveaway!!!
Bulletproof all the way. They support out Military, that is all I need to know. Just ordered one for my Ford F250
You bet!!! Love their support of the military!!! 🇺🇸
Just now buying a new Rubicon. I’ve been searching for different ways to mount my phone. I’ve enjoyed watching your review, it’s been very helpful to me. Thanks!!
Thank you Cindy!!!
I'm glad you did a review on these. Really helped me with my decision. Was a very helpful video
Thanks for watching and supporting the channel!!! Really glad that you found the video helpful!!!
I purchased the bulletproof, and like that I can still throw my sunglasses up there while still having the mounts. You lose all this with the rail system. Thanks for sharing.
Thanks Joe, appreciate you watching!
I'm a new member of the Jeep family, with a Jeep Gladiator Overland. I ran across your video while researching phone mounts. I was hesitant to buy either because of the cost and all of the questions I had. Luckily, you answered all of my questions. Thanks for doing such a thorough job of reviewing the products. Keep up the good work.
Thanks Lou, that's why I do it! If I can't find the answer before I make a decision, I try to share what I find with everyone else! Thank you for the kind words and support of the channel! Maybe you won't have to buy one after all. Good Luck on the Give Away!!!
Hi Lou - welcome to the Jeep family! We're also available to answer any questions you may have while you're selecting a mount.
@@BulletpointMountingSolutions Thanks... I do have another question. It appears your Gladiator solution fits in the left part of the cavity on the dash. If the rubber needs to be removed, does Bulletproof provide a replacement? If so, is it included?
I am currently serving the military with 20+ years under my belt. Any time I can push a product that gives back to the military is a huge plus for me. Thank you for the review and honesty. I had never heard of bulletproof mounts and am really excited about their product. Their logo would match up well with my 50 CAL Ronin Antenna! Keep up the great work!
First of all, THANK YOU for your service 🇺🇸!!! Also, thank you for your continued support of the channel! Bulletproof is a GREAT company and you will LOVE their products!!!
Twisted ADV Thank you for your service.
I'd like to echo the others in thanking you for your service. We would be honored to provide you with a mount as part of our program supporting veterans in the Jeep community. Please message us via Facebook or email support@bulletproofmountingsolutions.com and we will get you set up.
It doesn’t get any better than this, especially in today’s day and age. THANK YOU @bulletproofmountingsolutions 🙏🏼🙏🏼!!!
Bulletproof Mounting Solutions You just made me a huge fan of your product for what you are doing for our Military Men and Woman and doing that for @Twisted ADV
I can't afford one just yet but I will be getting one when work gets back to normal.
I've been in customer service for going on 20 years and I pride myself on taking care of my customers.
I will be passing on your product to all my friends.
Way to go!
Nice work on the review...looking forward to getting a JT after the shutdown, one of these mounts will be one of the first additions.
Thanks for watching!!! Excited for you to get your JT!!! It’s AWESOME!!!
Awesome video and comparison. Love the channel! Keep up the great work.
Thanks for your support!!! 🙏🏼 Good luck on the give away!!
Great video! I'm new to the jeep family with my jeep gladiator. It was nice seeing a head to head on these mounts.
Welcome to the family!!! The Gladiator is my 2nd Jeep and I absolutely LOVE it!!! Thanks for watching and supporting the channel! Hopefully some of my previous videos and or future videos will be helpful as well! Good luck on the Give Away!!! 🍀
This is a great video. Super informative.. I really wanted to know the differences and this video addressed all of my concerns. Thanks again...
Thanks for watching and supporting the channel Robert!!! Glad to know that you found the video helpful and look forward continuing to try and share my experiences with the Jeep community!!!
Thank you for the review. I have been trying to decide between the 2.
No problem Mick, happy to help! I was stuck between the 2 since December, so I know what you mean! If you win the give away, maybe this will he’ll make that decision easier! Good luck!
Awesome review thanks helped me make my decision. Video quality is getting better and better and with time you’ll definitely reach and help more people and get more views stay true you’ll have no problem with this good content
Thank you Nolan, I really appreciate your honest feedback and support!!! That’s super motivating! Honestly, with everything going on, it’s been a little difficult to focus on creating new material here lately. However, I’m very excited about some of the new videos that I’m getting ready to work on!
Great review! I have been looking at both these options and you answered all the questions I had.
Thanks for the support Nate! I’m glad this was helpful! When I was trying to decide, I could find any reviews that had them both side by side. Good luck on the give away as well!!!
Thanks for the support Nate! I’m glad this was helpful! When I was trying to decide, I could find any reviews that had them both side by side. Good luck on the give away as well!!!
Finally a video that shows real world use. Genius. Thank you
Thank you so much!
Thanks for the comparison! I just got a JT last month and was looking into the same phone mounts
You’re more than welcome! Thanks for watching and welcome to the family!!! Good luck on the giveaway as well!!!
Thanks for the review and telling us and showing us the details about both. You helped me decide to go with the Bulletproof , one to keep the storage and also to purchase the passenger model and angle towards the driver so it doesnt interfere with the view of the road, and my air vent. (If they make one ) Time to go shopping !!!!
i really like the Bulletproof! i need one bad! my phones always falling under my seat lol... thanks for all your reviews!!
You are more than welcome Tracy!!! Good luck on the giveaway!!! Hopefully we can hit some trails this Summer!!!
Great video! That gladiator interior is dope!
Another great video! I just finished my Arcus Bumper and Warn Evo 10S install on my JT after watching your other video. Next mod for me is my ham radio and this particular video is sparking some ideas on how to mount the control head. Thank you again! Oh, and if you are not sure what mod to do next, I need to install my ham radio antenna somewhere.... :)
Thanks again for all of your support!!! Glad that the video helped!!! I’ll follow your lead on the HAM radio and antenna!!! LOL I haven’t thought about that one yet!
I just installed the Bulletpoint single-ball mount in my new JL. Super easy install, and it came boxed individually, because I selected each part separately so I could get the purple carbon fiber arm. Looks great on the Reign Purple JL.
Great review. Thanks! Bulletproof makes dual ball mounts for both the left & right sides of the top dash pocket, giving you a place for 4 devices. I like the fact that the center section is left open for storage of sunglasses, etc. as somebody else already mentioned. 67D is great too, but I'd loose the center storage area.
Boldr Bangr That’s exactly what we were thinking during the design process. Storage space in your Jeep is valuable for sure.
exactly what I was thinking. I like the idea of the rail just because you have option as far as where you want to position your devices but you always need storage space and that's why I want to go with bulletproof. And great review @jt mods
I just installed my bulletpoint dual Mount in my 2016 JKU and I love it!
Was wondering when someone would actually call it Bulletpoint 😆. But I guess at one time it was Bulletproof
Great video... I was waiting for a side by side review of these two companies to make my decision...thanks
No problem Frank, thanks for watching!!! Maybe the giveaway will make that decision for you! Good luck!!!
Awesome video with some great info. Nice send on the speed bumps as well!
Thank you for watching!!! Love the comment on the speed bumps! LOL 😂 Good luck on the give away!!!
This video is very helpful, thanks for the video and thanks for sharing. Hope we could see more videos. Thumbs up.
Thank you for supporting the channel and good luck on the give away!!!
I wasn't really sure whether I wanted Bulletproof or 67 Designs, but in the end it was made easy for me. Every time I tried to order 67 Designs they were out of stock of the phone holders (March of 2021), so I got the Bulletproof. I did want the rail system for mounting some other items, so I may still order the 67D rail mount with 4 balls and just attach Bulletproof arm and phone holder (tried it on a friend's 67D rail and worked just fine.
These are awesome systems! Well done video in day to day conditions.
Thanks Davis! Really appreciate your support of the channel, and I agree, they’re both great products!!! Good luck on the give away!!!
Thanks for the video comparison. Was also looking at the ProClip mounting solutions but these look like the more popular choices. I’ll probably get the Bulletproof option since I don’t need to mount that many devices.
I’ve not seen the ProClip product. Thanks for mentioning it, I’ll check it out! If you win the giveaway tomorrow, 4/17, you won’t have to buy one!!! Good luck!!! Thanks for the support!
Just went with the bulletpoint! The Rubi system was installed in just s few minutes. I love that they are in Toledo just like me. A perfect product and a must have!😊
I ran bulletproof in my jk and bought new double set up for my gladiator mojave. Solid and love them.
Great video. Hope to be able to put the mount in my Jeep.
Thanks for watching and supporting the channel!!! Good luck on the giveaway!!!
Both of those mounts are sweet! But I’m glad you’re giving away the bulletproof product. I don’t need the full rail system.
Absolutely! Thank you for watching and supporting the channel! Good luck on the giveaway!!!
Thanks for the video.... is the first one I see that shows a fair and detailed comparison of products..... I liked the bullet proof one, looks better quality... keep up the good work...!
Hi Oscar - if you have any questions please feel free to reach out to us.
Thanks for your support of the channel! I really enjoyed doing this video, because I wanted to see the products side by side and as you saw it didn’t disappoint! I have you down for the give away. Good luck!!!
Great video!!! Subscribed!
!!
Just purchased a Bulletproof mount! Great vid
Thanks for the videos. Very informative.
Happy to help! Thanks for watching!!!
Thank you for doing such a detailed review. I just got a 2021 Rubicon (Diesel..yeah buddy) and kept going back and forth between these two. I like you would like to add my iPad and is the determining factor. Thanks again!
You bet and congratulations on your diesel Rubicon!!! I’d be lying if I said I wasn’t a little jealous. LOL!!! I believe Bulletproof now has an option for an iPad as well, so you may check into that.
Both are great products. I do love my 67 rail system and phone mount on my YJ
Awesome video! I learned a lot for sure. This video was really informative. Bulletproof seems like a better deal to me!
Thanks for your continued support of the channel! Good luck on the give away!!!
JT Mods thanks!! I’m hoping the odds are in my favor again! 🤞🏼
Great video. I am interested in a mounting system. I like the Bulletproof product for its compactness and pricing, to be honest. As you described, the rail system gets pretty pricey. The contribution to the military goes right in line with my Freedom Edition JL.
Great review! I’ve had my d67 now for 8 months on my JT and it’s been fantastic. You can use ram mount balls on the rail as well for more versatility. However Ram just released their own rail for the JL and JT that I think may be the best of all the systems. Would love to see you do a review of that also.
Thanks for watching and your support of the channel! I’m not familiar with Ram products, but I’ll definitely check them out! Thanks for the info!!!
Great video, bulletproof for me
Waiting for new videos!!!!!
I like the fact that the Bulletproof doesn’t take up the entire dashboard pocket.
Both products look great!
Great video! Keep it up.
Thank you!!!
Great review
Great video and review. Definitely going with Bulletproof. Does everything I need and the price is good. I don't like the fact that 67 sends you a GoPro mount but you have to pay extra for the mounting ball, especially with the price they already charge you. Makes no sense.
Awesome review! Keep it up
Thank you Evan!!! Good luck on the give away!!! 🍀
👍 great job on review like the 67 design too.
Thank you for watching and supporting the channel!!! Even though you prefer the 67D, I’ve got you down for the giveaway of the Bulletproof, good luck!!!
Great review I have been trying to decide between the 2 products - I only need to mount phone and gopro so I will be going with Bulletproof mount for sure. Plus I also like to support company that give back. Lastly the bottle opener is awesome!
I’m glad you found this helpful, and I’m right there with you in regard to Bulletproof giving back! 👊🏽 I’ve got you down for the give away, so perhaps you can win it and not have to buy it! Good luck!!!
Mike - if you have any questions please feel free to reach out to us!
Great video and honest review.
Thanks Chris!!! Appreciate the support and hope that it helped you in your decision!
Great review thank you
Thank you for supporting the channel!!!
Love the BulletProof
Thank you for putting so much time and effort into making this video! It was really helpful and I have ZERO complaints but I do have a suggestion that may have made your video even more useful (for me at least.) You covered a lot of detail about construction, weight, install, price, etc. but you didn't tell me how well you liked the position of either mount as far as being able to use your phone. Is it within easy reach? Of course, I am hands free while driving but let's face it, you might need to touch the screen once in a while right? The bullet proof looked to be within easy reach while the 67 seemed a little farther away from the steering wheel.
Looking forward to viewing more of your videos to see what else you've created!
Thanks a lot Mark! I’m always looking for ways to get better, so I appreciate the feedback! To me, the difference in how reachable either setup is, is negligible as I was able to reach either for a quick touch of the screen. I hope that helps!
I bought the Bulletpoint mount based on this review. It did not seat well. The double stick pad would not fit flush resulting in a gap. I returned them and bought the 67 Designs. Much better form and fit.
This is the difference between Made in America and not Made in America. 🤣
@@texasxlander now that it has been a couple months with the 67 Designs, I can say it is excellent. I am very pleased with it. The price seems a little high, but in my opinion the form, fit, and quality is noticeably better than Bulletpoint.
@@dougg8280 Agree 100%
Thanks for the review.
No problem Jim, thanks for supporting the channel! Good luck on the giveaway!!!
Bulletproof is the better deal. You can buy two of them for each end and you get 4 mounts and still cheaper than 67d. With bottle opener too. Great solid product
They do make a very solid product!!!
Not mistaken Bulletproof products are all made in China.... 67 Design was designed and made in USA!!... True is more money but I support Made in USA!!
Great job on the review. You help me make up my mind on this upgrade. Bulleproof 100%...
Thank you Todd, I really appreciate it!
Bulletpoint does sell a full length mount that I believe has up to 5 mounting locations. I just bought it for $99. Good video
I have 67 D Mounting System. However, either one is good in my book. Excellent video my dude.
Thank you so much!!! 🙏🏼 Agree with you, either mount is hard to beat!!!
@@21SethG you're welcome for sure!!
I have the BPMS set up and LOVE it. I used the dash “pocket” to hold my sunglasses. Also the price point was huge for me.
Honestly, my expectation going into this was that the BPMS was going to be inferior in quality and that WAS NOT the case at all! VERY impressed by their product!!!
Thanks for your support Gobi! Keeping the use of your dash tray was one of the biggest factors in our design!
I bought the gullet proof because i didn't want to take up all of the space in the compartment with the big rail. I still wanted to use some of the storage
I have some of these bulletpoint mounts on eBay they are the universal mounts for a heck of a deal right now.
I went with the bulletpoint mounting system for my JT they had the full width mount with phone and go pro for like 100 bucks plus it has lots of room for more mounting balls and the fit was perfect on the dash looks clean. For the same thing the 67 would be like 200 bucks and not look as clean to me.
Really good! I've been looking for a good phone mount that would hold up. Then I saw that trail recon's son got a 67 phone mount for his tj. But the only issue is it was 100$
Yeah, they are pricey for sure! The bulletproof quality is just as good!!! Thanks for watching and supporting the channel!!! Good luck on the giveaway!!!
Awesome video! Subscribed!
Thank you for your support!!! Good luck on the give away!!! 🍀
CONGRATULATIONS Jon!!! You won the @Bulletproofmountingsolutions mount!!! Check out my Instagram account (@JT_Mods) to see the LIVE announcement of the giveaway! Please reply here so that we can arrange to exchange contact info!
Thanks for comparison. I wanted the 67, but they never had anything in stock, and would not let me order ahead and wait. Glad to see there's a comparable option!
Perfect review , I have been tossing between the 2 as well and my research came about the same . I'm not sure I need to have a more buildable system then the Bulletproof .
Bulletproof is a SOLID option if you don’t need to mount anything more than a phone and GoPro!!! Thanks for watching and supporting the channel! Good
Luck on the give away!!! 💯
If you have any questions about the Bulletproof system please feel free to reach out to us!
The bulletpoint rail can do the same thing as the 67 and is just as sturdy as the 67 as well.
Great video! I think that these two mounting solutions are tops, but I am liking the design of the Bulletproof model a little better. And Bulletproof is way ahead in the cost department. As a new customer, Bulletproof gives me a 10% discount today. I too want to add an ipad mount when it is back in stock at Bulletproof. If I want to add more than two devices in the future, I can always get another mount for the passenger side. But then I have no idea what else I would want to add that would clutter my dash area, so it's a moot question for me. Thanks again for the great video.
You’re more than welcome!!! Thank you for watching and supporting the channel! Hope you’ll find future videos helpful as well!!!
Dang, great video. Decisions Decisions.
Thank you!!!
Yes sir !!!
Glad you did this i have been wanting a bulletproof so why not enter a chance to win !!!
But nice video and great work on channel!!!
Thanks for the support and good luck on the give away!!!
Good luck Chris!
Thank you !!! If just so happen to not win I’ll order anyway lol
Thanks for the reviews! I just got my RAM Mounts setup, I do not like it, I'm pretty certain I'm going to return it and get the 67designs. As much as I disliked their customer service, they have a superior product I think, which sucks. The RAM is just too bulky and I hate the mount for my iPad mini 6.
Just got my JLU Rubicon, it has 17 miles on it. This would be my first mod to mount my GoPro.
Thanks for the support of the channel Bill! I hope this video and some of my others are helpful for you! Good luck in the give away!
Thanks for the video. I’ve been wanting to get a mount but 67 has been confusing and priced so high for a mount. There is just to many pieces.
I ordered the bulletproof before your video ended. Thanks!!
Awesome!!! Great choice, you won’t be disappointed!!! Thank you for watching the video. I’m glad it helped you with your decision!!!
Robert Carlini Thanks for your business! We tried to make the kit as simple as possible and include everything you need for installation.
I'm curious how both of these will hold up over time. I just got a JL and I want a phone mount ASAP. I was going to get the ^&D rail system, but they're sold out of the clamp holders, and I don't know how the magnetic option will work with my phone. I may give the Bulletproof one a try for now since they seem to be in stock.
I have the bulletpoint rubigrid in my JKU. I didn't know about 67D.
Very good review! You know how wide is the opening on phone holder (not expanded)? I am just wondering if it could hold a regular size phone like iphone 8 not “S”
I don’t know the exact dimensions, but it will definitely hold an iPhone 8!!! Thank you for watching and supporting the channel!!!
Never heard of them!
I’m so glad you weighed everything. I really want my Jeep to be as light as possible so I’m goin with the lighter one
Love it
Thank you and good luck on the giveaway!!! 🍀
Great review and very detailed but drove me crazy to keep hearing D 67 !! Its 67 designs so if anything it be 67 D right ! 🤣🤟
Good video. So Bulletpoint/bulletproof provided the test product at no cost which you said will not sway you...it swayed me sir. On top of that, 10% profits donated to our military heroes, my kind of company, ordering that one.
Yeah I Like the 67D & I'm gonna Pick it up also + 3 of the Ball mounts, So I can do it for 2 Cell Phones & 1 or 2 for the DJI OSMO Action Cameras to record the trail + my self, Cause I'm see if I can create a 5 or 6 Ball set up + 4 Carbon Fiber Arms KOOOL...
Make sure to tag me on Instagram when you get it setup! I’d love to see it!!!
Will do Bra!!! Be Safe OK???
It's really a matter of your needs combined with taste, and what you are willing to pay...
The 67 is a solid product, giving you the full use of what was once called dash storage space and you can mount multiple thing on ot, making your Jeep look like a spaceship...
The Bulletproof system gives you exactly what you need, where you need it, as you can buy the bare bones minimum single phone holder on the driver's side to the the double ball system (shown here in the vid ) which will get you a phone and a camera mount.... As well, Bulletproof sells one for the right hand side as well...
Me personally, I bought the MAGNETIC phone holder from Bulletproof without the GoPro camera mount. My logic is my phone can record, just like a GoPro can... And putting my phone on a Magnetic mount ( as well as taking it off ) is a much simpler way of life "For me".
EDIT... I believe he said the 67 has a similar non rail mount like the Bulletproof system does, but it was not shown here, and that would have been a "Apples to Apples" comparison....
I wouldn't pay 200 for a phone mount unless it was dipped in gold. Haha. I do like the bulletproof one and if it helps our military brothers and sisters then that is even better. Being new myself to the Jeep community I have never heard of either one but I will definitely look into them now.
Great job on the video, keep it up and stay healthy.
😂😂😂 I hear ya Peter! Completely understand where you’re coming from. You may not need to, as you may win this one! Thanks for continuing to support the channel! Good luck on the give away!
JT Mods Yes, I totally understand the need for the mount too. It would be cool to see the rail system with with a little more weight on it, like an iPad connected at the same time. I bought a another kind and I got what I paid for. It shakes pretty bad even on the highway and that was just with an iPhone hooked up. Did you notice any vibration to either one while driving just down the road?
Going down the road, they were both solid. Obviously when I took on the speed bumps, they shook a little. LOL!!! As I mentioned, I didn’t have them installed either. I think the iPad will be fine the way I plan to use it, which is pretty much on trails only. It may be fine daily, but not sure. I’m sure plenty of people run them daily. I think with all the additional mounting points, the weight will be ok. I guess we’ll find out at some point! With everything going on, I’m not in a rush to order anything else for the mount. LOL!
JT Mods it must be very popular because it is sold out! Hehehehe.
Thanks again for the comparisons.
@@BlutosBeaters Hi Peter - we will have them back in just a couple weeks and they will ship as soon as they hit the warehouse. BTW, we also have a passenger side mount if you're looking to mount an iPad. Let us know if you have any questions.
Good honest review. They both seem like great options but the bullet proof seemed better packed and the little goodies that come with it are nice. The fact that they give 10% of there yearly revenue to the military is great. Thank for the vlog, it will help me in my decision.
Agree with everything thing you said Nick!!! Not going to lie, I really wanted to keep the bottle opener from the Bulletproof kit before giving the rest away!!! 😂 Thanks for supporting the channel!!!
@@21SethG
Right! That bottle opener is the icing on the cake. It was my birthday a few days ago and my son wanted to get me something, so I was looking at the mounts. I could not decide, so I have not ordered anything yet. Before I saw the video it was hard to decide. Are you on the gram by chance?
Absolutely!!! @JT_Mods on insta! I’ll be on the lookout for you there! It’s a tough decision for sure. Just depends on what your needs are! However, word on the street is that Bulletproof will soon have an iPad/tablet mount as well... I guess we’ll see!!!
Great informative video other than you kept incorrectly identifying 67 Designs as "D67".
Yes, I apologize for that.
Kinda like the rail personally
The rail is nice!!! It’s what I’m using right now as well.
Will the bullet proof phone mount attach to the D67 arm? I have the D67 but would like to add on possibly with Bullet proof.
I have the 67d mount for my JLU. They are mounted to my Vector Bar. I have had them since early 2019. From day 1 it has been a love/hate relationship. I've never had any issues with my Vector bar. Just getting that out. My issue is with the 67d mount. When I place my cell phone in the holder it will rattle just driving down the street. Very annoying to the point that I take my phone out and place it in the cup holder to make the rattle stop.
Fast forward to present day. It still rattles with a cell phone installed. Now the issue is that the phone will slide out of holder on hot days. The sun light through the windshield heats the adhesive on the anti slide pads and then just falls out. In short I can not recommend 67d due to the annoying rattle.
Currently on the hunt for a better mount. I also have a Ram mount x-grip for a tablet that has issues as well, but that is another review.
are the universal phone holders interchangeable with the mounts?
Seems worth noting that the bulletproof arm is substantially heavier. Not sure if that translates into better long term stability but seems like it would from a common sense perspective
your link to the 67D is the older cheaper mount.
Thanks for letting me know Justin! I’ll update it this evening!!
I feel like you left out a very important point. Bulletproof now Bulletpoint is literally a straight rip-off of 67 Designs, 67 started 4 years before Bulletpoint. Not only that but Bulletpoint is NOT made in the USA while 67D is fully designed and made in the USA. Makes it a lot easier to charge less when another company's engineers already did the work and you have China make it for you. I know not everyone cares about that but its something everyone choosing should know.
Where are they manufactured?
What's the "bullet" for?
I get the patriotism aspect and I love it, but just as a side note, Bulletproof do get some of the parts from China; designed in America, but parts from China - IJS.