My suggestion with the4 cycle pocket bike with the 2 stroke exhaust is cut the existing pipe at header and have a shop weld up some leading piping and do a duel exhaust tip. You can find exhaust canisters on eBay for cheap and then piping as well to extend off the header.
I did a quick search for the x7. Pocket Bikes Unlimited has a (Drag Race Exhaust system). I think it looks nice. Your x7 is a naked bike and the exhaust would complement it.
I always love it when people say buy a real bike but truth is they are not the same. With a pocket bike or a mini bike you don’t need to do 150mph to feel like you’re going fast. 30 to 60mph on a pocket bike or mini bike is plenty and I can toss it in my car and go anywhere.
For the exhaust, just straight pipe it into a dual exhaust, I did it to mine, I liked so much......the reason I liked it was cuz it was loud. I would love to see it in a straight pipe dual exhaust.
Please get an expansion tank for your setup it will make more power and you will have a peak powerband that you can tune to be at the peak of the powerband meaning you make max power
With the big bore kit have you tried porting and polishing the head mine was rough as hell with loads of casting marks. Runs way better with a polish 👍🏻
Thegeokiller 15 For starters, no one, and I mean NO ONE likes to hear that. Second, it's a terrible thing to do to your engine. It can result in loss of power or damaged valves (do your own research), and 9/10 it will look worse.
I heard bail bonds can be worth it. Hopefully you can get crowdfunding from the subscribers. They will release your Pocketbike from the impound lot soon! 😉
I have an question do U know how to weld and cut? Im a little new two the channel but starting to watch ur videos though.... U IS LIT LIKE THREE CANDLES:🕯🕯🕯!!!...
Cut off the baffle come off that X7 two stroke “expansion chamber”. This way, it’ll act like a megaphone pipe, just without returning the positive reflected pressure wave.
Hey kiddo, Travis Pastrana didn't make it in one 50 miles per hour test run. You just keep doing what you're doing and the people who don't like it can Bark at the Moon and kick rocks. You doing good and I learn from your mistakes which to say the least are few and far in-between in my opinion. Good job and thanks for taking the time. I would also recommend a chain tensioner on top of the chain that thing's flapping in the wind like nobody's business. I'm guessing it wouldn't flap so hard with a load on it but you know that it's going to have a premature failure at that rate.
I hava a R6 mini bike How do you take the carburetor off it runs 50mph it wont start the key wont turn . Is there any video on this kind of bike I guess ita a pocket bike its small.
Hey I bought one of these for my nephew and niece, what do you think is the best bang for buck mods to the engine? Big bore kit? Carby upgrade, Reed valves? Boost bottle?
From my experience, big bore and carby upgrades are the go to and cause way less of a headache. Boost bottles are meh and reed valves need a lot of work to make them worth it. Proper motor prep will yield you more power than a reed valve
Use a scotch pad next time instead of a razor. Razors have chances to gouge and wont sit properly next time. Scotch pad is rough enough to clean but not to damage.
Hey Dylan I got a pocket bike x1 which is a 49cc I really hope you do get a pocket bike like that. I have an issue is that the exhaust is really loud I can’t find a silencer
No tickets and fifty mph record! !! ! Wow that's a great day.
Much Respect
The chain looks a lil bit loose
Awesomeness Rc a little? That thing is way too loose.
my chain wasnt that bad on my dt50mx and it still flew off and got stuck in my swinging arm
My suggestion with the4 cycle pocket bike with the 2 stroke exhaust is cut the existing pipe at header and have a shop weld up some leading piping and do a duel exhaust tip. You can find exhaust canisters on eBay for cheap and then piping as well to extend off the header.
Now make it go over 150+ mph because it's the Pokemon Pocketbike! Gotta pass em all!
HAHA
My hobby is motorized-bikes, but this channel is great, thanks for sharing.
Yes buy the engine it's a good learning experience you'll remember for the rest of your life
Give this video a thumbs up for me!!
What does everyone think about the 49cc idea and exhaust pipe?
I did a quick search for the x7. Pocket Bikes Unlimited has a (Drag Race Exhaust system). I think it looks nice. Your x7 is a naked bike and the exhaust would complement it.
Dylon Desbiens Sub. Delinquent exhaust
big gun exhaust
The 49cc idea sounds good!
Straight pipe
I always love it when people say buy a real bike but truth is they are not the same. With a pocket bike or a mini bike you don’t need to do 150mph to feel like you’re going fast. 30 to 60mph on a pocket bike or mini bike is plenty and I can toss it in my car and go anywhere.
I love this channel it helped me with my pocket bike
Rebuilding a 49cc! Awesome!
Do the 49cc pocket bike build
When working on a pocket bike it happens. Keep doing what your doing. ✌
I want a pocket bike now
For the exhaust, just straight pipe it into a dual exhaust, I did it to mine, I liked so much......the reason I liked it was cuz it was loud. I would love to see it in a straight pipe dual exhaust.
That chain freaked
Put a hmf on it the have the performance and it sounds good
50mph, that's insane! It looked like 30-40. I wonder the HP that lil engine has
Big gun exhausts are badass and sound good too!
Please get an expansion tank for your setup it will make more power and you will have a peak powerband that you can tune to be at the peak of the powerband meaning you make max power
Pro crit t4
Get a 49cc 2 stroke coolster mini dirt bike
You should really buy a 49cc engine
Mini pit bike squad what about a 50cc???
nobble there are more available cheaper parts for 49cc chinese than 50cc brand name
@@MY3DCO is there a pocket bike facebook page? or IG!?
Buy a 2 stroke pocket bike cag engine. I’ve upgraded mine and I can get pass 40mph. Upgrades are cheap and they are easy to work on.
Jordin Prampin what does cag mean
With the big bore kit have you tried porting and polishing the head mine was rough as hell with loads of casting marks. Runs way better with a polish 👍🏻
Totally a Leovince or an akrapovic. I have a Leovince 50cc pipe for my Apollo Orion RX50 moped and its amazing
I´m not an expert but that chain looks way too loose, it was wobbling like crazy when you did the high speed adjustment!
Oh my goodness that chain is still a tad loose, awesome bike though c:
Proline racing pipe if not try a jet pro tuned pipe or a fatty pipe.
I really want you to do 49cc carburetor because I just got a 49cc engine for the exact bike you have in the video
The Friday scene made me subscribe to you 😂💯🤷🏾♂️ That was so unexpected
Straight pipe
spencer todd No...... just no.. no motorcycle, even if it's just a pocket bike, should ever be straight pipped intensionally.
HellishGrin460 why
Thegeokiller 15 For starters, no one, and I mean NO ONE likes to hear that. Second, it's a terrible thing to do to your engine. It can result in loss of power or damaged valves (do your own research), and 9/10 it will look worse.
HellishGrin46 unless it Briggs & Stratton or eny ought engine like that
HellishGrin460 will i do like to hear it
Yes please do complete build from beginning to end with 49 cc
I heard bail bonds can be worth it. Hopefully you can get crowdfunding from the subscribers. They will release your Pocketbike from the impound lot soon! 😉
My bike has the same break issues you may have to change the pads
Is this a 4-stroke / 2-stroke
Thank you , Dylon
I have an question do U know how to weld and cut? Im a little new two the channel but starting to watch ur videos though.... U IS LIT LIKE THREE CANDLES:🕯🕯🕯!!!...
Yoshimura exhaust!!! It well really look good with the red and black
I deffiinatelly would like to see u set up a motor for racing
SCREAMING EAGLE EXHAUST
Akrapovic
yes buy the engine ;) be cool to see the standard top speed run acceleration vs tuned
you should put an Akrapoic on it
Cut off the baffle come off that X7 two stroke “expansion chamber”. This way, it’ll act like a megaphone pipe, just without returning the positive reflected pressure wave.
12:30 Mark - 50MPH run starts.
I'd love to see a 49cc build
Put a Yoshi pipe on it I got one on my Raptor 700 it sounds amazing of course get a smaller is look up Yoshimura
Put the monster can on there might not be in budget but can u see if you can try
Do a rebuild with upgrades but on a cheap bike we can all afford like a CAGLLARI! Build!!!!! A CAG build would be awesome
Do a pro circuit exaust on the new bike
You should put a pro circuit pipe on it
everyone needs a randy in their life
Did anyone see the chain slap when he was adjusting the carb?
Thumbs up on performance
Where do you buy Goodman Street which one is heat Mikuni feedback
please do a complete rebuild i like that idea
It’s going now, check the channel :)
Get a small tool box for on the tracks 😉
Do it... ! JUST DO IT
Yooo i just watched your ild vid, and now i see this
Nice bike
That chain needs to be tighter it should only go down a 1/4 of a in with a rulert
maybe she saw your red node and thought it was rudolf the red nosed raindeer
I've been watching your video's and you've made so much progress, keep up the good work bro. #Newsubscriber #pocketbikegang
open header on 4 stroke and cr80 pipe on 2 stroke.
run non ethenol fuel to prevent rubber getting eaten and diaphragm won't stick. S.E.F (small engine fuel)
or gasket w.e it was
Can you buy a brand new pocket bike? Like one currently sold on the market today? I dont know which ones are good or not
Yes Ebay has them cheap
Mine was 75 buck its a race carb got it on my 196 cc gokart also
Great video Man! Awesome information!
Do the fricken performance build pleasseee!
You should do shutouts for a random person who is subscribed to your channel
Yes do that im from de Netherlands
Hey kiddo, Travis Pastrana didn't make it in one 50 miles per hour test run. You just keep doing what you're doing and the people who don't like it can Bark at the Moon and kick rocks. You doing good and I learn from your mistakes which to say the least are few and far in-between in my opinion. Good job and thanks for taking the time.
I would also recommend a chain tensioner on top of the chain that thing's flapping in the wind like nobody's business. I'm guessing it wouldn't flap so hard with a load on it but you know that it's going to have a premature failure at that rate.
I hava a R6 mini bike How do you take the carburetor off it runs 50mph it wont start the key wont turn . Is there any video on this kind of bike I guess ita a pocket bike its small.
Pocket bike yes
Yes buy the pocket bike engine do the build
All it needs Now is a big, turbo lol
Hey I bought one of these for my nephew and niece, what do you think is the best bang for buck mods to the engine? Big bore kit? Carby upgrade, Reed valves? Boost bottle?
From my experience, big bore and carby upgrades are the go to and cause way less of a headache. Boost bottles are meh and reed valves need a lot of work to make them worth it. Proper motor prep will yield you more power than a reed valve
You should make it so someone can win a pocket bike
Do you like big pocket bikes ? Like the x bikes 110cc bikes. I know Honda made a few small bikes that are amazing and are not mini tiny bikes
I have a blata elite 14. We should go race sometime.
Your bids are to good I love them can I see a rutman mini bike on one of your bids
Do a vid on how u wire up that light please
Strait pipe and yes do the 49 cc engine build
49cc
Put an akro or fmf and shorten it if need be
Use a scotch pad next time instead of a razor. Razors have chances to gouge and wont sit properly next time. Scotch pad is rough enough to clean but not to damage.
The pocket bike teaser lies about winning anything
Cool what I suggest is get a new air filter u won't regret It
That chain is still pretty loose man if you got a missing tooth on your sprocket look up gopowersports you can get one
Do a vertical stack
Make it have 2 exhausts that would be so cool 😎
Rich Only has 1 Piston. Not possible.
GnarlexPvP possible, not optimal
Hey Dylan I got a pocket bike x1 which is a 49cc I really hope you do get a pocket bike like that. I have an issue is that the exhaust is really loud I can’t find a silencer
Yoshimura, if they make one. I really like my RS3 Yoshi on my 1000.
I have the same pocket bike the 4 stroke do you know how to remove the engine mines has frame underneath it so it’s harder to remove
Get a fmf powercore 4 exhaust
Buy a 47cc pocketbike engine and tune it!!!!
ebay akropovic exhaust for the replacement
Two brothers is also good.
Chrome dual tip
fmf factory 4.1 titanium with carbon tip!