@@TheWoobles I really want to buy a Woobles but you only deliver to Canada 🇨🇦 please could u try make it deliver to the uk 🇬🇧 is that is okay it’s just because I am a beginner and these kits I can’t find anywhere:(
This gave me a good idea (not sure if it already exists) image a crochet mug glove or cosy that covers the whole outside of the cup, including the Handle.
I would use a food safe silicon sealant. You can get it really cheap off of amazon for like 7 dollars and it would make it both heat resistant and food safe so you could pour in a hot cup of coffee. Plus it would still be squishy and the stuff is clear so you can still see him. Just make sure to do it in a ventilated area ( it smells horrible) and with a brush and pair of gloves you don't mind sacrificing. It is very stick and the only thing it would not stay attached to after it dried was a thick plastic but it will be sticky before it is finished and make sure to do a few layers. Make sure to cover it entirely and don't have any spots food could get trapped in. I would also recommend boiling it after it cures and before use to get rid of the smell that might cling to it and to test if you missed any spots, It should be able to withstand boiling water if it cured right but it should not touch the metal at the bottom of the pot as that is hotter than boiling water. (also there may be two comments like this because for what ever reason my original one is not there anymore somehow?!?)
or get a silicon measuring cup to place inside rather than science the silicon onto the inner surface (though that would be fun if you can deal with the fumes). i have several of these measuring cups and they don't have handles so just get the volume and you'll be good to go!
Maybe tape the outside of him? 🤔 (btw I love your crochet kits. I've bought 3 of them ❤) Edit: thank you guys so much for 15 likes on this comment! 😊 I've never had this many likes before! ❤❤❤
I would remove the layer of brown “coffee “ off the top to make it more accessible for the coffee to pour inside and I would add some kind of lining in side 😊
Here's my idea: • Crochet the mug with thigh stitches making no wholes or at least making the wholes more small for no water to tresspass • Find a waterproof spray that is non toxic and spray it evenly on the inside of the mug for the liquids not to trespass • Wait the time for the waterproof spray to work and try using it, still there is the possibility for water to leak and probably it will not be useful on hot drinks because that could affect the layer of waterproof spray, but at least it could maybe leak less water if you do it correctly
Glue a layer of like, put some plastic inside of him, but if you want it to be a little bit squishy, put in like, plastic wrap or something like that, glue it on the sides, and then pour the coffee in slowly
leave a little compartment in between the yellow outside part of the cup and then crochet around it and then the inside yarn will only get wet but the outside can’t so you can functionally drink from it
Should plastic in the inside and like the bottom of the crochet! Hope this helps (btw idk if this entirely works ) have a good day to whoever is reading this!
Put a hard piece of plastic in the middle and the bottom. And glue the sides and bottom together. And then you can like put it in and take it out and put in different cups. So plastic liner that you can remove and clean.
Maybe try making it like a cover for the cup? So the cup goes inside and has enough structure to hold coffee, but it still looks cute. You could also add some kind of lining to hold water.
You know how to make it hold your coffee, so cut the brown part and then make a cup as big as the cup, the cup should be made of clay or whatever, you take the clay cup and stick it inside the plus and then you have a cup :)
You should make a hollow one, and put an actual cup inside, but make it so that way the crocheted part van be taken if (it would be secured by a snap of some kind I guess) so that way you can still wash the mug and re use it!
Something that might help - you could turn him into a cover FOR a coffee mug by altering his pattern a little, or you could add a plastic lining inside for the coffee! :)
Crochet it in 100% cotton yarn, cover it in slip, let it harden properly, then fire it in a kiln. The cotton will burn away but the crocheted design won't
Hii i have made ine before and it actually worked basically make a hollow cup then put plastic inside then crochet a smaller cupput it inside the crochet the big cup to the small cup inside then try put coffee in!! Hope it helps and makes sense😭
I'd say a plastic lining on the inside! But you should have some sort of protection on the outside too to prevent staining. Maybe NeverWet would be a good option?
I think you should take joe an remove the stuffing and instead add a plastic cup so it holds the coffee while having joe on the outside to make it him a cup of joe that works 😂🫶😁
Put a little plastic cup in him I think the ones that will fit is probably at the dollar store cuz I see like little plastic cups that are store that would be able to fit so yeah just crochet him around a cup and then his dreams will come true🎉
First go wash him second the brown part takes that out and put a cup cut it to where it fits and unless you want a coffee mug instead of him, it’s gonna be like a whole than you need to make your own coffee mug. Hope this has helped.
Where the brown is Add a plastic lining
Yes!
I was gonna comment this if somebody hadn’t 😊
This makes so much sense!
Probably not plastic if the coffee is hot it'll melt idk if we are trying to poor hot coffee tho
I was going to say that
I love that his name is Joe! Like a cup of Joe it so cute❤️
You get it 🫶
@@TheWoobles I really want to buy a Woobles but you only deliver to Canada 🇨🇦 please could u try make it deliver to the uk 🇬🇧 is that is okay it’s just because I am a beginner and these kits I can’t find anywhere:(
A cup of Joe has fallen for me!
Hiiiiii
Why did I think of "cotton eyed Joe"😭
Turn him into those things that wrap around your soda cans to keep them cool
or just make it a little wrap around your coffee mug so ur hand stays warm
This gave me a good idea (not sure if it already exists) image a crochet mug glove or cosy that covers the whole outside of the cup, including the Handle.
IM GONNA START CROCHETING ONE OF THOSE FOR MY MUG
I would use a food safe silicon sealant. You can get it really cheap off of amazon for like 7 dollars and it would make it both heat resistant and food safe so you could pour in a hot cup of coffee. Plus it would still be squishy and the stuff is clear so you can still see him. Just make sure to do it in a ventilated area ( it smells horrible) and with a brush and pair of gloves you don't mind sacrificing. It is very stick and the only thing it would not stay attached to after it dried was a thick plastic but it will be sticky before it is finished and make sure to do a few layers. Make sure to cover it entirely and don't have any spots food could get trapped in. I would also recommend boiling it after it cures and before use to get rid of the smell that might cling to it and to test if you missed any spots, It should be able to withstand boiling water if it cured right but it should not touch the metal at the bottom of the pot as that is hotter than boiling water. (also there may be two comments like this because for what ever reason my original one is not there anymore somehow?!?)
I have used this stuff before to make a mug and it works well if you are making a mug for personal use
Thanks for the info I never knew this was thing until I read this
Don’t do the center of him and only do the outside so he can go onto a mug and then he could gold coffee
You should put plastic in around the coffee cup, and then you can pour the coffee in❤
or get a silicon measuring cup to place inside rather than science the silicon onto the inner surface (though that would be fun if you can deal with the fumes). i have several of these measuring cups and they don't have handles so just get the volume and you'll be good to go!
Yeah! Make Joe be a sleeve for an actual coffee mug 😊
Crochet it again with a cup inside
Crochet on a coffer mug and andd coffee ❤ I love you vid I bout 7 packs already
i ❤ joe the coffee. i suggested lining it with something like a zip loc or saran wrap
Maybe tape the outside of him? 🤔 (btw I love your crochet kits. I've bought 3 of them ❤)
Edit: thank you guys so much for 15 likes on this comment! 😊 I've never had this many likes before! ❤❤❤
The coffee sticking to the mug is so real 😭💀
You can make something thin but good enough too hold any liquid. Put it in side the cup so it looks like a squishy and
be a cup at the same time
You can crochet him around the cup☺️
I would remove the layer of brown “coffee “ off the top to make it more accessible for the coffee to pour inside and I would add some kind of lining in side 😊
You could add a red solo shot glass in there just a thought but I love the cute wobbles ❤️✨🥰🥤
I think you should remove the brown "coffee" in the middle which will then make space for the coffee and make the actual cup thicker
You can crochet on a coffee cup and like around and after full it with coffee ☕️
Omg! That’s was a funny idea to do! 😂 at least it held a bit until you squeezed it 😅 can I get a pin?? ❤❤ I love the woobles
I was so sad to see that they didn't shift to the UK.😢😢 please, I'd love these crocodiles.I really want one
I think you should crochet one around your coffee mug, so make him like a coffee mug, holder or warmer
Don’t sew on the top brown thing keep that off, and it might spill through the holes, but technically it worked
Here's my idea:
• Crochet the mug with thigh stitches making no wholes or at least making the wholes more small for no water to tresspass
• Find a waterproof spray that is non toxic and spray it evenly on the inside of the mug for the liquids not to trespass
• Wait the time for the waterproof spray to work and try using it, still there is the possibility for water to leak and probably it will not be useful on hot drinks because that could affect the layer of waterproof spray, but at least it could maybe leak less water if you do it correctly
Her: puts glue pepper and buttons in body
Me: childhood memories unlocked
You should make a little jacket for a coffee mug to make it useable but looks unique
Glue a layer of like, put some plastic inside of him, but if you want it to be a little bit squishy, put in like, plastic wrap or something like that, glue it on the sides, and then pour the coffee in slowly
leave a little compartment in between the yellow outside part of the cup and then crochet around it and then the inside yarn will only get wet but the outside can’t so you can functionally drink from it
You can dip him in ceramic or coat the string in ceramic them knit it so the cup will be hard and able to hold liquid
Put a glass cup inside, I've done it with something similar as a pencil case and it works
You should get rid of the brown part then add a plastic cup then your done!!❤❤😊
I’m pretty sure you can use stiffener stuff
I love his name it’s so cute like a cup a joe ❤❤❤😂😂😂
Add resin in the inside like on the rims and then fill it once the resin drys
Should plastic in the inside and like the bottom of the crochet! Hope this helps (btw idk if this entirely works ) have a good day to whoever is reading this!
lol the “justice for Pierre” 🤣
The plastic shell of the coffee pods would be great to hold the coffee for Joe
Make it so you can put it on your coffee cup kinda like a cup cozy
telling random people i like cheese 5/100 (that penguin is so cute omfg😭)
Cut a tarp so that it is the right size. And like, hot glue it or something to the inside
Atleast Joe will smell like coffee
1. Get a cup 2. Crochet the cup 3. put the cup in the crochet 😎👍
Add cardboard on the inside 😊 love your videos .keep going no matter what people say ❤
Put a hard piece of plastic in the middle and the bottom.
And glue the sides and bottom together. And then you can like put it in and take it out and put in different cups.
So plastic liner that you can remove and clean.
You can put a plastic cup in him it's gonna be much easier ❤
make him hollow and then put the coffee inside you got a functioning crochet coffee cup 👍👍👍👍
If you add a special waterproof liner and don’t have the brown part that simulates coffee I think it’ll work
Maybe try making it like a cover for the cup? So the cup goes inside and has enough structure to hold coffee, but it still looks cute. You could also add some kind of lining to hold water.
Add a plastic lining on the inside. But my first thought was to dip him into resin to firm and seal it all up.
You know how to make it hold your coffee, so cut the brown part and then make a cup as big as the cup, the cup should be made of clay or whatever, you take the clay cup and stick it inside the plus and then you have a cup :)
You should make a hollow one, and put an actual cup inside, but make it so that way the crocheted part van be taken if (it would be secured by a snap of some kind I guess) so that way you can still wash the mug and re use it!
You should cover it on that like see through glue until there is a hard coating over it and nothing will leak out
You could cover it in clay slip and then fire it so you have a ceramic mug that looks crocheted
Idea: make a hollow, waterproof interior with a wool circle on top. Simple solution, maintains proper look
Could put a smaller cup or something inside it so that it doesn’t leak out the wool.
You could get a glass cup, then make Joe into a wrap, to go around the cup! You can add the handle by crocheting it.
Something that might help - you could turn him into a cover FOR a coffee mug by altering his pattern a little, or you could add a plastic lining inside for the coffee! :)
Maybe you can put your cup of coffee in the crocheted one, and then you could drink it like that ❤😊
Make another w/o the brown and line this inside w/ clay!
Please do mine!
a removable cup in the middle would be good, you can separate to clean inside and out :)
Fabric hardener and then plastic wrap on the inside ❤ hope that helps
Crocheted him around the coffee cup, then put coffee in the coffee cup
You can't but you can make like a hot or cold drinks
Connect like a plastic bag on the inside with glue or thread and maybe add a hard plastic lining in the handle so you can actually hold it
Crochet it in 100% cotton yarn, cover it in slip, let it harden properly, then fire it in a kiln. The cotton will burn away but the crocheted design won't
Cover him in a sealant except for the top where you’re gonna pour the coffee in
@TheWoobles try taking the brown off the top and then put a small plastic cup into it then put the coffee in the plastic cup not the wool
While ur crocheting it do it around the cup like a cup holder so it fits
Instead of some of the stuffing, you should put a cup in there and then remove a little bit at the top
You could try and find one of those cups with no handles and put it inside Joe’s cup!
Hii i have made ine before and it actually worked basically make a hollow cup then put plastic inside then crochet a smaller cupput it inside the crochet the big cup to the small cup inside then try put coffee in!! Hope it helps and makes sense😭
Make a cover for your mug so it looks and feels like joe😊
Make him as a cover for your mug! Keeps your hands from getting too hot from the hot coffee too
If I had it I would put like a small glass cup inside 😊
Add a plastic zip thing or put a cup inside and it could be like a cover over the Mug
Add a plastic lining to the inside of the cup and on the brown part ❤❤❤
Make it so that Joe is like a holder that goes over the mug like a sleeve but it covers the whole thing
Make a mug warmer as Joe and put it on ur mug and then he will hold coffe😂❤
You should add a hard circle at the bottom and glue it on there then add a hard rectangle all around the circle in the inside
Make him as a little sleeve for a mug
You could crochet a mug. Put yarn around a mug and it'd look like Joe
I'd say a plastic lining on the inside! But you should have some sort of protection on the outside too to prevent staining. Maybe NeverWet would be a good option?
You could buy a mug with no handle that fits perfectly in Joe and take out the brown on top and then you can put coffee in it!
Make like a little mug cover and make it look like him, and put you coffee mug inside
I think the best would be just making one that fits around your cup
You could use beeswax or other food safe wax to the finished cup. I feel like dipping it into a large amount of wax would be the best.
Try crochet around the cup so you can have the coffee in the cup as well as the crochet cup without leakibg
I think you should take joe an remove the stuffing and instead add a plastic cup so it holds the coffee while having joe on the outside to make it him a cup of joe that works 😂🫶😁
Try adding a protective film to cover the holes
Crochet another one and crochet it around the coffee mug
Fill him with coffee beans 😊
Yk like those beanies? Like the inside I would put that in Joe that way it can hold coffee
Put a little plastic cup in him I think the ones that will fit is probably at the dollar store cuz I see like little plastic cups that are store that would be able to fit so yeah just crochet him around a cup and then his dreams will come true🎉
Try fabric stiffener on the finished project to give him more shape and stability
First go wash him second the brown part takes that out and put a cup cut it to where it fits and unless you want a coffee mug instead of him, it’s gonna be like a whole than you need to make your own coffee mug. Hope this has helped.
You should make him a coffee cup 😊
Make him but don’t make the brown part, put a small cup in him and u have a coffee mug :D
U could make it like a coffee cup cover so u dont burn ur hands
You could crochet it and then add plastic on the interior so it can hold it
You could make him into a cup holder (so it like goes around the coffee cup
Get a little like glass cup that would fit in the mug then pour the coffee in the mug
COVER HIM IN FLEX SEAL. THE COFFEE CUP IS NOW A MUMMY
In the inside of the cup put a zip lock so the coffee won’t drain❤❤❤❤
Joe volunteered as tribute