My enclosure arrived this week, just installed it tonight, very impressed with the quality and fitment of your enclosure . Is there a way to buy additional Velcro, I used all of mine and would like to have extras 🙂, looking forward to trying out the wolverine with the new enclosure tomorrow.
Thanks, have not tried the heater in this unit yet, but a heater and the soft enclosure works well on the 2019 X4 so sure it will do great in this one also. Thanks again
@@ryandearing60 link is below utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/copy-of-yamaha-wolverine-rmax2-2021-2-door-utv-full-cab-enclosure-sides-rear-window
Is there Velcro on the entire inside lower part? I would want to Velcro the whole door, so there are no gaps for air to go in. Also, do you have any pictures with the snaps?
Yes, We sew velcro along the entire edge of enclosure. You may want to purchase extra self adhesive velcro when you order we do not normally give enough to cover the entire enclosure 100%
The enclosure below works with the OEM Glass Front and Rear utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/oem-glass-windshield-yamaha-wolverine-rmax4-2021-crew-cab-4-door-utv-upper-doors-enclosure-sides-only This enclosure will work with every other windshield and OEM Glass Rear utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/yamaha-wolverine-rmax4-2021-crew-cab-4-door-utv-uppder-doors-enclosure-sides-only Sorry we do not at the time offer just rear doors. Thank you
Hi I noticed on your site "does not fit 2021 x4". I was under the impression the cages were the same between the 2 models? Do you have intentions of adapting one to 2021+ X4? I am located in beaver falls Pennsylvania and can provide a donor if necessary. TY!
Yes, in fact we just put the link on our site (see below) the cages are the same, but the front and rear doors a ever so slightly different. Below is the link to the X4 Enclosure utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/yamaha-wolverine-x4-850-2021-crew-cab-4-door-utv-full-cab-enclosure-sides-rear-window
Sorry if I missed it. But, if I order one of these without the back window, does the aft side of the side panels have straps to secure it the C-pillar in the rear? From the video, it kind of looks like there is only velcro back there to secure it to the rear-panel. (For info purposes, I'm ordering my machine with the Yamaha OEM glass front windshield and rear window)
@@sidexsideenclosures4523 Thank you! I just got a soft enclosure from my Yamaha dealership. The sides don't seem as easy to get off as yours. No zipper looks like maybe all velcro around roll bar. Does that sound right?
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/oem-glass-windshield-yamaha-wolverine-x4-850-2021-crew-cab-4-door-utv-full-cab-enclosure-sides-rear-window Thank you
That is perfect. I froze my butt off this weekend in Pennsylvania with my same model 4 seater Rmax. I’m getting one right now. Thanks
Looks awesome. Thanks for designing a simple solution
Beautiful 👌
Looks pretty slick! Nice work! 👍
My enclosure arrived this week, just installed it tonight, very impressed with the quality and fitment of your enclosure . Is there a way to buy additional Velcro, I used all of mine and would like to have extras 🙂, looking forward to trying out the wolverine with the new enclosure tomorrow.
Do you have a vid of one with the snaps instead of velcro
How does the zippers hold up to lots of dust and sand?
I'm excited to install mine
do you have to take it off when trailering the maching?
How does the heater keep up in a soft side? Product looks 👌
Thanks, have not tried the heater in this unit yet, but a heater and the soft enclosure works well on the 2019 X4 so sure it will do great in this one also. Thanks again
How much?
@@ryandearing60 link is below
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/copy-of-yamaha-wolverine-rmax2-2021-2-door-utv-full-cab-enclosure-sides-rear-window
Very nice guess I’ll be putting my order in
that is very nice
Is there Velcro on the entire inside lower part? I would want to Velcro the whole door, so there are no gaps for air to go in.
Also, do you have any pictures with the snaps?
Yes, We sew velcro along the entire edge of enclosure. You may want to purchase extra self adhesive velcro when you order we do not normally give enough to cover the entire enclosure 100%
Not bad will consider this instead of spending 7k on full cab
Just wondering how much the heater setup might be ...
Perfect! Do you make it to work with the rear OEM glass? Also, what if I got OEM front doors, can I get just the rear door uppers?
The enclosure below works with the OEM Glass Front and Rear
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/oem-glass-windshield-yamaha-wolverine-rmax4-2021-crew-cab-4-door-utv-upper-doors-enclosure-sides-only
This enclosure will work with every other windshield and OEM Glass Rear
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/yamaha-wolverine-rmax4-2021-crew-cab-4-door-utv-uppder-doors-enclosure-sides-only
Sorry we do not at the time offer just rear doors.
Thank you
I'm assuming that this also fits the 2021 X4 as well? If so do you know how they differ from Yamaha's ?
Hi I noticed on your site "does not fit 2021 x4". I was under the impression the cages were the same between the 2 models?
Do you have intentions of adapting one to 2021+ X4? I am located in beaver falls Pennsylvania and can provide a donor if necessary. TY!
Yes, in fact we just put the link on our site (see below) the cages are the same, but the front and rear doors a ever so slightly different. Below is the link to the X4 Enclosure
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/yamaha-wolverine-x4-850-2021-crew-cab-4-door-utv-full-cab-enclosure-sides-rear-window
Sorry if I missed it. But, if I order one of these without the back window, does the aft side of the side panels have straps to secure it the C-pillar in the rear? From the video, it kind of looks like there is only velcro back there to secure it to the rear-panel. (For info purposes, I'm ordering my machine with the Yamaha OEM glass front windshield and rear window)
Ever get a reply on this?
@@Simply2025 Nope. I ended up canceling the back glass because it was on back order for so long, and just ordered the full soft sides and back.
Wow very nice job!! I know know where to buy!!!
YAMAHA : Wolverine : 1.000 ( 4x4)
Muito Bom !!! : Trilhas ; Matas ;
Pedregulhos ; Lamas ; Etc ;
Wolverine ( 4x4) 😲😃🌍😲😄😯😃😀👍
What do you use to clean all windows...car wash? Inside windows?...soap and watwer?
Yes just use soap and water. You can hose down, I wouldn't use high pressure.
@@sidexsideenclosures4523 Thank you! I just got a soft enclosure from my Yamaha dealership. The sides don't seem as easy to get off as yours. No zipper looks like maybe all velcro around roll bar. Does that sound right?
Unless zipper was hidden behind a velcro piece, I didn't look that hard, but Thank You again!
@@Twace24 what dealership? May not be our enclosure, may be the Yamaha oem one, it does not have the zippers for easy on/off like ours
@@sidexsideenclosures4523 Liberty, Mo
How do I buy one
utvenclosure.com/collections/yamaha-utv-full-cab-enclosures-viking-wolverine/products/oem-glass-windshield-yamaha-wolverine-x4-850-2021-crew-cab-4-door-utv-full-cab-enclosure-sides-rear-window
Thank you