Steve, thank you for your very helpful video. I purchased another brand of blind and installed it using an "outside mount". There were NO instructions on how to assemble the "valance returns" (the two side pieces over the decorative valance); not in the box and nothing online that I could fine, until I found your video. You have a new fan and I have properly installed blinds. :-) Thanks again.
@@Bestcustomscreens well…I was doing the job as a favor and the lady couldnt make up her friggn mind….after an hour and a half of standing around, doing nothing, and listening to her indecisiveness i told her to call someone else. I then hit the bar and watched football.
@@Bestcustomscreens I swear man, she was driving me nuts. Its one of those moments in life where you debate money versus maintaining your sanity. I chose sanity, and football. Keep up the great vids bro
When you use this machine driller how deep you make the hole, I mean, should I count 1, 2 3, enough to screw the hardware of the blind? Is this manual machine driller, how many batteries is used? Do I find this battery machine in the home depot?it comes with the baterries and the correct screws size?
amzn.to/3u4DgUi this is where I bought my combo drill and driver to install. When pre drilling the pilot holes you only need to drill through the mounding. Not into the wall . The purpose of drilling is to not crack the wood. Does this make sense?
First off I'd like to apologize for replying after 2 weeks. Unfortunately I didn't see the alert of your comment. Now to my answer.... If you have a hollow wall you can always use anchors. Above the window thre should always be a header. A header is a large piece of wood above the window. Usually about 4 to 8 inches tall depending on the size of your window. There may also be thick plaster or double or triple layers of drywall. In this case you will need longer screws. Also invest in stud finder. That may help you find the wood. Hope this helps. Please let me know if it worked.
The standard screws installers use are 1 1/4" or 1 1/2" screws. We also use hex heads because the hex bits work well with the cordless driver. Thanks for watching.
You will need to take the blind down from the brackets. It sounds like the ladder cord may have come off of the drums on top. Once you have taken it down you'll see what's going in there.
One of the best instructional videos I've watched.
Thank you for the compliment. I hope that you were able to apply what you learned on your own Fauxwood blinds
Steve, thank you for your very helpful video. I purchased another brand of blind and installed it using an "outside mount". There were NO instructions on how to assemble the "valance returns" (the two side pieces over the decorative valance); not in the box and nothing online that I could fine, until I found your video. You have a new fan and I have properly installed blinds. :-) Thanks again.
Glad it helped! Please think of us the next time you need some blinds or screen doors. bestcustomscreens.com/product/cordless-window-blinds-shades/
Awesome video! This helped us a lot and install went smoothly.
I am really glad that the video helped you a lot. Did you have similar mountings around the window? Thanks for 👀 watching.
Thank you so much,this video was so incredibly helpful to me !!!!
You're welcome 😊 It's our pleasure to serve. Was it easy to install after watching the video?
Awesome video
Thank you! And thanks for watching 👀
That was very helpful, thank you.
You're welcome. Glad it was helpful!
Very helpful - thanks!
Awesome to hear that the video was helpful to you. Did you install your blinds easily?
Easy enough. Good vid
Thank you 😊 I'm glad it helped. How long did it take to install?
@@Bestcustomscreens well…I was doing the job as a favor and the lady couldnt make up her friggn mind….after an hour and a half of standing around, doing nothing, and listening to her indecisiveness i told her to call someone else. I then hit the bar and watched football.
@@JS-vp2kt LOL 😆 😂
@@Bestcustomscreens I swear man, she was driving me nuts. Its one of those moments in life where you debate money versus maintaining your sanity. I chose sanity, and football. Keep up the great vids bro
@@JS-vp2kt Thank you 😊 we will do our best to. 👌
Looks better without the cover
Why is that?
When you use this machine driller how deep you make the hole, I mean, should I count 1, 2 3, enough to screw the hardware of the blind? Is this manual machine driller, how many batteries is used? Do I find this battery machine in the home depot?it comes with the baterries and the correct screws size?
amzn.to/3u4DgUi this is where I bought my combo drill and driver to install. When pre drilling the pilot holes you only need to drill through the mounding. Not into the wall . The purpose of drilling is to not crack the wood. Does this make sense?
Was the width you ordered the exact O.D of the frame?
Yes we measured the exact mounding frame measurement.
What if the window frame is hollow? How would you screw those brackets then?
First off I'd like to apologize for replying after 2 weeks. Unfortunately I didn't see the alert of your comment. Now to my answer....
If you have a hollow wall you can always use anchors. Above the window thre should always be a header. A header is a large piece of wood above the window. Usually about 4 to 8 inches tall depending on the size of your window. There may also be thick plaster or double or triple layers of drywall. In this case you will need longer screws.
Also invest in stud finder. That may help you find the wood. Hope this helps. Please let me know if it worked.
amzn.to/33ZPnot here is a low cost stud finder on Amazon.
How long of a screw?
The standard screws installers use are 1 1/4" or 1 1/2" screws. We also use hex heads because the hex bits work well with the cordless driver. Thanks for watching.
Hello how do you adjust your blinds so They a twist shut the correct way
If your blind is not closing all the way you could have a bad title. Your blind should be able to close tilted in both directions.
@@Bestcustomscreens Is there a way to get inside up top and adjust it? This is a brand new blinds that were installed
The top blind seems too high and tight It will only close the opposite way. And half way the correct way that Allows me to see out the window
You will need to take the blind down from the brackets. It sounds like the ladder cord may have come off of the drums on top. Once you have taken it down you'll see what's going in there.
@@Bestcustomscreens thank you.
Why didn’t you say that the sides don’t come with it you have to buy them separately?
Not on our blinds. Must be another company.
I'm really sure you can build it yourself. I did this 2 weeks ago thanks to the Woodglut plans.
microphone dude microphone
We do have but sometimes we shoot our videos on the fly while installing at a job. That day was especially challenging because I was sick 😫
It sounds good. No mic needed 👍🏼