Great Ideas From Small Wooden Slats | Wood Recycling | Reuse Old Things #WoodworkingGuide ★Thank for watching! ★Please like, share, and subscribe our Channel here:
I'm a beginning woodworker and found this book czcams.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ gives useful advice on different types of tools & their usage, types of bits, safety etc. So when i do start to buy tools and bits, i basically know what to look for, how to use them & the types of woods certain bits are recommended to use on.
Great design; underutilized. I wish it were longer, rectangular, and had been stained a little darker. A nice pair of legs, sanded and oil-polished......I would bid to buy.
That is a beautiful piece of furniture. I would like to suggest that you could make the table top a hexagon that would match the smaller hexagon pieces that were built into the top surface.
Hi Ron, The dimensions can be whatever you need or want. The critical part is making an accurate hexagon and then duplicating that, say, 40 or 50 times. The reddish colored wood he is using (I'm guessing a mahogany), or it could be whichever wood is common to your area, it could be walnut. The two woods just need to be contrasting. As for the dimensions, it can be whatever size you want (2ft x 2ft), (2ft x 3ft), (3ft x 4ft), etc, etc. You saw his underlayment was oversized. He marked on that how big he needed the design to be, and then he cut it down to size afterwards. Anyway, sorry for being long winded, but what I'm saying, is you DEFINITELY could make this! It is a repeating pattern, it is some basic math. You could do this.
The width of the trim boards determines the other dimensions. X=trim width divided by .868; 2x is the length of each side of the hexagon; 3x is the length of the long sides of trim. All angles are 60/30 degrees. Hexagon widths are 4x corner to corner and 3.5x flat to flat. Number are approximate, close enough for woodworking.
@@RSS2100 do you know why this pattern is ‘running out’? The woven element is creeping but whenever I’ve encountered this pattern in the past this has not been the case? Is it because the darker wood is narrower than it usually would be - relative to the hex? Somehow this deviation does not prevent a cohesive pattern, just alters the look slightly….
Congratulations on the amazing craft! It already has the pedal and the wheel... with little else, it would be possible to include a cell phone charger.
Идея хорошая, реализация жуть. Для стабильности на фанеру клеить нужно было. Делал "торцовку" сотовую, изготовить шестигранник точный, в 0,1мм, очень сложно.
I'm a beginning woodworker and found this book czcams.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ gives useful advice on different types of tools & their usage, types of bits, safety etc. So when i do start to buy tools and bits, i basically know what to look for, how to use them & the types of woods certain bits are recommended to use on.
This is why I like social media!
Can anyone suggest a site or video for using clear 2 part epoxy in wood working projects?
Muito bom......parabéns você tem talento 👏
Maravilhoso 🇧🇷 trabalho de um gênio..
turned out beautifully!👏!!!
Nice woodworking ideas 5 angles neatly laid out looks amazing
Another fabulous project. Thank you for sharing. 👏😎🌸
Умница! Есть золотые руки
Посмотрел от начала до конца. У вас золотые руки!
Beautiful table..... 🏴 🇨🇦
There are always Chickens and saw dust eating cats in these videos
Que trabalho inclivel amigo 👏👏👏
Cute new use for an old sewing machine.
Great concept, muh execution. Still looks really nice for someone punching this out at the speed of wood
رائعه رائعه رائعه فنان ومبدع تسلم ايدك عمل ممتاز ومتقن وراقي جدا جدا جدا
Parabéns pelo trabalho e criatividade.
Brasil.
नमः
ماشاء الله تبارك الرحمن تسلم ايدك عمل فني جميل جدا تحياتي لك من فلسطين غزه
Very unique staff keep on advancing...
Me encanto!!! Felicidades 👍🎈🎈🎈🎁🎁🎁🎁🎉🎉🎉
Karya yang sangat luar biasa kawan....belajar banyak dari ilmu yang anda bagikan...
I love that sewing foot pedal
Super fikir harika işçilik mutluluk veren sonuç👌💡⏳🏆
Great design; underutilized. I wish it were longer, rectangular, and had been stained a little darker. A nice pair of legs, sanded and oil-polished......I would bid to buy.
Thanks you
Absolutely beautiful!
You are the good skilled worker, thankyou.
Thật chính xác và hoàn hảo, video chất lượng đấy bạn!
The method you use for cutting is really admirable.
Awesome great idea 💡
Beleza de trabalho parabéns
Mình tích điều bạn làm sáng tạo và thông minh đấy
Muito lindo
Gorgeous!!
Lindaaaaa! Tem como fazer o tampo redondo?
That is a beautiful piece of furniture. I would like to suggest that you could make the table top a hexagon that would match the smaller hexagon pieces that were built into the top surface.
Kerja yang sangat luar biasa
Good lord that is GORGEOUS!!!! Especially with the Sewing machine legs!!! Are they Singer??
Great art
As always fabulous
Grazie, mi piace molto questo video.
Trabalho muito bonito beleza
احسنت عمل جيد جدا رائعه ولك منا جزيل الشكر
Great job 👍
Beutifull this tebal 🙂
типичное китайское "бегом на продажу". Нижний щит разбухнет - верх трещинами пойдёт.
Thanks you
Очень, очень понравилось!!! Браво! 💪💪💪👏👏👏👍👍👍
Pretty cool!!!
Muito bom
Hehehe,I just laugh this video,when he finish the table top,then, he use the singer stand from sewing, other than the wood stand.ok huh.
Nice work!
I love it!
Great design, unique and well made - a therapy table. Good for especially older people to exercise their feet, ankles and calves while having tea!
Very good job
அழகு அற்புதம்
Top show beautiful
wish they would give the dimensions for their ideas ,would make it easier to try our hand at making some of these great projects
Hi Ron, The dimensions can be whatever you need or want. The critical part is making an accurate hexagon and then duplicating that, say, 40 or 50 times. The reddish colored wood he is using (I'm guessing a mahogany), or it could be whichever wood is common to your area, it could be walnut. The two woods just need to be contrasting. As for the dimensions, it can be whatever size you want (2ft x 2ft), (2ft x 3ft), (3ft x 4ft), etc, etc. You saw his underlayment was oversized. He marked on that how big he needed the design to be, and then he cut it down to size afterwards.
Anyway, sorry for being long winded, but what I'm saying, is you DEFINITELY could make this! It is a repeating pattern, it is some basic math. You could do this.
The width of the trim boards determines the other dimensions. X=trim width divided by .868; 2x is the length of each side of the hexagon; 3x is the length of the long sides of trim. All angles are 60/30 degrees. Hexagon widths are 4x corner to corner and 3.5x flat to flat. Number are approximate, close enough for woodworking.
@@RSS2100 do you know why this pattern is ‘running out’? The woven element is creeping but whenever I’ve encountered this pattern in the past this has not been the case? Is it because the darker wood is narrower than it usually would be - relative to the hex?
Somehow this deviation does not prevent a cohesive pattern, just alters the look slightly….
Very nice. Could you do a video on how to make a floating bed.
يعطيك العافيه يا هندسه
روعة جميلة جدا
Congratulations on the amazing craft! It already has the pedal and the wheel... with little else, it would be possible to include a cell phone charger.
Show meu amigo
lindaaaaaaaass 😍💞💞💞💞💞💞💞💞💞💞
Tuyệt vời
Muito criativo, ficou show.
Parabéns!!!
Задумка интересная, но очень не аккуратно, зазоры большие.
Look Great👍🙃
Пример как хорошую , в принципе идею , превратить в барахло !!!
Thanks you
عمل جيد وممتاز تحياتي.
Thanks you
Parabéns meu amigo 👍, muito lindo esse projeto 👏
✅✅✅
انت اجمل
parabéns pelo vídeo
Bonita idea amigo carpintero
Отлично получилось
bonne idée 💡
Great work
Que coisa linda!!!
✅🇯🇵🇯🇵🇯🇵
Does anyone else love to watch but have to turn the sound down??
Thanks you
Greate
verry good,,,ilike
super tare
If the voices are sped up, yet the action is NOT how slow is he actually moving 😂
Круто!!!
Thanks for educated contained
May I know what liquid you use to grease the wood base
Thanks you
Amazing.. cool
Me sorprende que no hayas alineado los granos de las inserciones. Buen trabajo igual.
Amazing...👍👍
सभीकोAdvance मे होली की हार्दिक बधाई हो 🎆🎇😈🥶🟪🌌
Good job
Hi great idea. I respect stukamans opion but to me how one does it is ones choice to me is looking at the idea and use it or improve on it. ❤
I'm from Cape Town South Africa
Thanks you
Идея хорошая, реализация жуть. Для стабильности на фанеру клеить нужно было. Делал "торцовку" сотовую, изготовить шестигранник точный, в 0,1мм, очень сложно.
Wihh keren bang
Muito criativo talento de sobra
Excelente trabajo, ¿Qué medida tiene cada pieza?
Thanks you
❤️❤️❤️❤️❤️❤️😍
What mixed glue are you using? second: 4.00
Where can I get that vise that has the ball and joint ?
Благодарю
Very nice
Can you make something other than a table? Maybe a bookcase or a trunk...
عمل جميل
bonito trabajo. pero hay mucho desperdicio de materiales
Very beautiful! Great job!