Reloader 22 is the most consistent powder I have found for my 270. Thankfully I have quite a bit of it because it is like winged unicorn crap to find for sale out there. Another great video man! Thank you!!
IMR 4350 is my general "do almost anything" powder with Varget close behind. I do use Win 760 and StaBall 6.5 when the 4350 isn't available for most loads in the .243 - 30.06 range of calibers.
Five favorite powders in good supply on my bench. Rifle: Retumbo IMR-7828 IMR-4350 Reloder 19 AA1680 Handguns: H110 Universal Longshot Power Pistol Blue Dot I've got many others that I picked up a pound or two here or there to try, only to find out they don't give me what I'm looking for in accuracy first, velocity second. Also, have some that I've used in both rifles and handguns over the past twenty years, only to find out that I can get better results from one of the Fab Five. Good thing it lasts indefinitely with proper storage.
I have quite a lot of all these powders on hand. Retumbo works well in the 300 Phoenix and H1000 works quite well in the 6.5x284 Improved. I have used H4831, IMR7828 and some of the older discontinued powders in some of the Weatherby magnum cartridges with good results. I wish H870 and H450 were still available, they were excellent powders.
I got in on the IMR Enduron powders. Excellent results with the 300WBY using 7977, and the 270 win using 4955. Very little change in either velocity or accuracy over a fairly significant temperature variance. Unfortunately IMR has discontinued the lineup to help keep up to the higher demand options.
Give me some Varget, H4350, and H4831 SC and I am pretty much good to go. I am testing Sta-Ball for temp stability b/c the huge variances in Texas Temps make temp stability a must.
I’m honestly a big fan of temp stability. Where I live, I could be hunting in weather as hot as mid 90s and as cold as sub zero. So for me, H4350 and H4831 are where it’s at.
7828ssc is the sweetsauce for 6.8western, at least for my 2 rifles. it's also terrific in my 300 WSM with damn near any bullet, 270 win with 150gr bullets, and my 6 creed with 105/108gr BTHP's (no load data for it anywhere you have to work it up yourself). probably my favorite powder.
In my Winchester stainless classic ( 26 in barrel ) 300 WBY factory chambered with 85.5 gr 7828 , 180 gr Sierra , 215 federal pri I get 3300 fps over the chronograph at 3.575 oal !……
Not much to disagree with here. I've killed more game with Retumbo than all others combined, but it's pretty useless if you can't get it. I would love to try reloader 26 as well but it is what it is. Id like to put Vit 570 on the short list also, but same deal with that. Until/unless those powders become available, I'm putting my hopes on Staball HD, but if that don't work I guess I'll have to struggle along with Ramshot LRT and US 869, for my hot rod weatherby's, and deal with significant temp instability.
Superformance has impressed me so much in my 270s and 280s, I honestly have no need for H4831SC, H4350, Re22, Re19 anymore. Velocity is higher by a substantial margin (270/130 gr bullets, and 280/140 gr bullets) and accuracy from 1/4 to 1/2 MOA
@@ReloadingWeatherby makes sense. I am rebarreling my 30-06 with a Brux barrel. Not sure when it will be done. I was originally converting that 700 action to a 280AI but changed my mind. I'm over 3300 fps in the 270 and 280 with exceptional accuracy. That said, I did not try SUPERFORMANCE with heavier bullets. Once I saw the results I was getting I didn't see a need. AND I got 8 pounds of it for 265.00!
I recently started formulating duplex powder using fast powder and slow powder mix for pistol. So far so good. No signs pressure. (Yet.) Additional 5% velocity in this early stage
Gonna start doing load work up for a 280 Ai just wondering what powders you might recommend? Looking to use a barns ttsx 150 grain or barns LRX 168 grain bullets.
🤔 I wanted to clarify something for your safety! Everyone knows the Reloader 26 is the "Magic Powder" when it comes to velocity! And though my experience is "Very Limited" with it specifically, I do have my past experience with some "Big Magnums" and "Pushing the Envelope" with Velocity! Because published data on it is "Very Limited", if you are using it in the 270 Winchester, the jumps in pressure (and performance) comes very suddenly, so be careful! 😱
🤷♂️ Now, Why am even I telling you this? As I mentioned before, this powder is a "little tricky"! And : 1.) Because, just like me, you own both a 270 Winchester and a Bigger 30 Caliber Magnum! Thus, it is easier to become somewhat less cautious, when reloading the smaller cartridges, because we don't often think of them as quite as dangerous to exceed maximum pressure and blow ourselves up! 2.) This specific powder is much more sensitive to temperature changes than the powders that you have listed as your favorites and, at least here, we are having a much cooler than normal summer temperatures to work up a load! But, the hot weather is just around the corner! 3.) Because you have been Reloading for other people the last few years, you now have just enough knowledge to be "Dangerous" (it is easy to become overconfident or complacent with smaller cartridges)! 4.) Because, when this power gets close to filling the case, pressure spikes do occur! And, since you have more freebore than many other rifles, you may be Tempted to load the bullet farther out and really fill up that case, to push the limits on what velocity you can get with this powder! Don't! 5.) Because their is limited Reloading data on this powder, it is somewhat of a "guessing game"! 6.) Because, with the primer shortage and you often being forced to use whatever primers you can get, the pressure conditions will change fast enough with this powder to cause issues! 6.) Just remember, Safety First, which is a little harder to do when powders (like Reloader 26) and components (primers) are in short supply and you want to conserve them! Resist the Temptation to move up the powder charge weights too fast with this powder (in not small enough increments) or jumping too far up to the maximum charge weights with this powder (i.e. close to a full case of powder)! That is just something that you can't afford to do with this powder, because it is so much less forgiving than say H4831 (which seems to be your most used powder, by far, too)! 💥 7.) In no way am I trying to be disrespectful - quite the opposite - it is just possible that you may actually find this powder on the shelf now and I am just reminding you of things that you may already know - JUST BE CAREFUL! 🤕
For me at the moment H4831SC and benchmark
Reloader 22 is the most consistent powder I have found for my 270. Thankfully I have quite a bit of it because it is like winged unicorn crap to find for sale out there. Another great video man! Thank you!!
Best reloading funnel... I really like that Lyman.
Hey! Thank you! I’ll be watching this again when it’s time to go shopping.
IMR 4350 is my general "do almost anything" powder with Varget close behind. I do use Win 760 and StaBall 6.5 when the 4350 isn't available for most loads in the .243 - 30.06 range of calibers.
Five favorite powders in good supply on my bench.
Rifle:
Retumbo
IMR-7828
IMR-4350
Reloder 19
AA1680
Handguns:
H110
Universal
Longshot
Power Pistol
Blue Dot
I've got many others that I picked up a pound or two here or there to try, only to find out they don't give me what I'm looking for in accuracy first, velocity second.
Also, have some that I've used in both rifles and handguns over the past twenty years, only to find out that I can get better results from one of the Fab Five. Good thing it lasts indefinitely with proper storage.
I truly enjoy watching this powder video. thank you thank you.
Thanks for watching!
I have quite a lot of all these powders on hand. Retumbo works well in the 300 Phoenix and H1000 works quite well in the 6.5x284 Improved. I have used H4831, IMR7828 and some of the older discontinued powders in some of the Weatherby magnum cartridges with good results. I wish H870 and H450 were still available, they were excellent powders.
Retumbo is a turbo fueled magnum powder as well. My 28 Nosler performs magnificently with it, pushing 168 grain AccuBond LR bullets.
Of course my 300rum loves H1000. Found on lb about 2 months ago.
I agree good all around powder. 👍
Cabela's closest to me always has Retumbo. The price is the problem. Shot up to 70 bucks when it was 56 two months ago.
I got in on the IMR Enduron powders. Excellent results with the 300WBY using 7977, and the 270 win using 4955. Very little change in either velocity or accuracy over a fairly significant temperature variance.
Unfortunately IMR has discontinued the lineup to help keep up to the higher demand options.
Give me some Varget, H4350, and H4831 SC and I am pretty much good to go. I am testing Sta-Ball for temp stability b/c the huge variances in Texas Temps make temp stability a must.
I’m honestly a big fan of temp stability. Where I live, I could be hunting in weather as hot as mid 90s and as cold as sub zero. So for me, H4350 and H4831 are where it’s at.
Good choices
7828ssc is the sweetsauce for 6.8western, at least for my 2 rifles. it's also terrific in my 300 WSM with damn near any bullet, 270 win with 150gr bullets, and my 6 creed with 105/108gr BTHP's (no load data for it anywhere you have to work it up yourself). probably my favorite powder.
I'm glad I read this. I should be getting my first 300WSM back from the gun builder in the next few weeks. I have no experience with it or 7828SSC
In my Winchester stainless classic ( 26 in barrel ) 300 WBY factory chambered with 85.5 gr 7828 , 180 gr Sierra , 215 federal pri I get 3300 fps over the chronograph at 3.575 oal !……
Just got 8 pounds 4831sc 😅
You're all set.
@@ReloadingWeatherby yea gonna last a long time 😂
Loading 130gs in your 270?
Shooters wolf powder is great! I really like the Precision rifle powder by them!
So many powders to choose from.
@@ReloadingWeatherby
...so little time. 🙁
760, H 4831, H4350, IMR 4831,IMR 4350, VARGET, W748,
IMR 4064, IMR 4350, H335
COVERS THE GAMMUT FOR ME.
Not much to disagree with here.
I've killed more game with Retumbo than all others combined, but it's pretty useless if you can't get it.
I would love to try reloader 26 as well but it is what it is.
Id like to put Vit 570 on the short list also, but same deal with that.
Until/unless those powders become available, I'm putting my hopes on Staball HD, but if that don't work I guess I'll have to struggle along with Ramshot LRT and US 869, for my hot rod weatherby's, and deal with significant temp instability.
8lbs of powder in Canada is around $600 cad. $200 is insanely cheap in todays market.
Sad
Good video!
Thanks!
Have u used IMR4350 in the magnum cartridges? I know some folks have
I have
Any experience with StaBall 6.5, StaBall 6.5 HD or Hornady Superformance ?
I hear Staball 6.5 and Staball HD is really good. I have Superformance, haven't been impressed with it so far.
Superformance has impressed me so much in my 270s and 280s, I honestly have no need for H4831SC, H4350, Re22, Re19 anymore. Velocity is higher by a substantial margin (270/130 gr bullets, and 280/140 gr bullets) and accuracy from 1/4 to 1/2 MOA
@@Accuracy1st I need to do more testing with the powder. Was not getting the velocities I wanted out of a 30-06
@@ReloadingWeatherby makes sense. I am rebarreling my 30-06 with a Brux barrel. Not sure when it will be done. I was originally converting that 700 action to a 280AI but changed my mind. I'm over 3300 fps in the 270 and 280 with exceptional accuracy. That said, I did not try SUPERFORMANCE with heavier bullets. Once I saw the results I was getting I didn't see a need. AND I got 8 pounds of it for 265.00!
@@ReloadingWeatherby superformance likes max fill loads so it shines in 308 243 6.5 creed
I recently started formulating duplex powder using fast powder and slow powder mix for pistol. So far so good. No signs pressure. (Yet.) Additional 5% velocity in this early stage
You left out RE-25. It's a velo champ. As far as temp stability, it pretty much stinks.
Where did you find those temp stability charts? I mainly use 4831sc and benchmark now but curious on A5744 and staball HD
I looked it up on Google
My 300 wby and 30-378 both shoot retumbo my 340 wby and 338-378 both shoot 7828
Look into 8133
Gonna start doing load work up for a 280 Ai just wondering what powders you might recommend? Looking to use a barns ttsx 150 grain or barns LRX 168 grain bullets.
H4831SC
@@ReloadingWeatherby thank you sir 👍
I’ve used h4350 with Barnes 120s and it’s a laser beam killed an aoudad at 400yds 1 shot
🤔 I wanted to clarify something for your safety! Everyone knows the Reloader 26 is the "Magic Powder" when it comes to velocity! And though my experience is "Very Limited" with it specifically, I do have my past experience with some "Big Magnums" and "Pushing the Envelope" with Velocity! Because published data on it is "Very Limited", if you are using it in the 270 Winchester, the jumps in pressure (and performance) comes very suddenly, so be careful! 😱
🤷♂️ Now, Why am even I telling you this? As I mentioned before, this powder is a "little tricky"! And : 1.) Because, just like me, you own both a 270 Winchester and a Bigger 30 Caliber Magnum! Thus, it is easier to become somewhat less cautious, when reloading the smaller cartridges, because we don't often think of them as quite as dangerous to exceed maximum pressure and blow ourselves up! 2.) This specific powder is much more sensitive to temperature changes than the powders that you have listed as your favorites and, at least here, we are having a much cooler than normal summer temperatures to work up a load! But, the hot weather is just around the corner! 3.) Because you have been Reloading for other people the last few years, you now have just enough knowledge to be "Dangerous" (it is easy to become overconfident or complacent with smaller cartridges)! 4.) Because, when this power gets close to filling the case, pressure spikes do occur! And, since you have more freebore than many other rifles, you may be Tempted to load the bullet farther out and really fill up that case, to push the limits on what velocity you can get with this powder! Don't! 5.) Because their is limited Reloading data on this powder, it is somewhat of a "guessing game"! 6.) Because, with the primer shortage and you often being forced to use whatever primers you can get, the pressure conditions will change fast enough with this powder to cause issues! 6.) Just remember, Safety First, which is a little harder to do when powders (like Reloader 26) and components (primers) are in short supply and you want to conserve them! Resist the Temptation to move up the powder charge weights too fast with this powder (in not small enough increments) or jumping too far up to the maximum charge weights with this powder (i.e. close to a full case of powder)! That is just something that you can't afford to do with this powder, because it is so much less forgiving than say H4831 (which seems to be your most used powder, by far, too)! 💥 7.) In no way am I trying to be disrespectful - quite the opposite - it is just possible that you may actually find this powder on the shelf now and I am just reminding you of things that you may already know - JUST BE CAREFUL! 🤕
What do you think of winchester staball HD and Magpro
Heard great things about it. Haven't tried them though
Did ever try ramshot lrt in any of your magnums?
Not yet... I want to
My grendal loves rl15 .
A lot of great powders out there
😎👍👍👍😎
For my 270 4831 4350 imr4350been my go to. Getting ready to try some n165 with terminal accent 136gn