Got it from amazon actually. 4” pipe. I cut it down to fit. Upgr8 Universal Outside Diameter Polished Aluminum Pipe (4.0"(102MM), 45 Degree) www.amazon.com/dp/B00S8X7A5E/ref=cm_sw_r_cp_api_i_PereDbCRVX3EF
Same reason as most people, wanted a simple N/A reliable setup. I bought this car with a blown up rotary with the purpose of making it a track car. It was rotting in a field when I bought it.
The engine harness cane with the engine. The body harness is the stock Rx7 one. Didn’t order a pre-done harness or anything. Followed the tutorial on granny’s speed shop website. Worked perfectly. Stock gauges all work except the speedo, but you can even make that work with some fancy box they sell.
idrisu1 I suppose everything has its price, but no wasn’t posting this as a for sale vid. Just got it painted recently and wanted to get a nice little video of it.
Poor car ;'( you should have welded your own frame instead of swapping from rotary. Disregarding the previous blown engine. An old corvette with that engine set up is more your style.
This car was rotting in a field with a blown up rotary. I saved it from that and brought it back to life and turned it into a pretty cool car(in my opinion of course). Judging by the tone of your comment however, nothing I say will make you understand or comprehend why I built the car the way I did, and that’s fine. Appreciate your comment anyhow.
@@x_Heffe_X Well we all appreciate the body of the car that you saved because the body work you did is beautiful. Looks and seems like a car you would be keeping for life as a dream car for your future family so I absolutely respect your choice in the engine that you put in. As far as my opinions are concerned I'd look every where I could for a new rotary engine. I'm sure your car hammers through turns though :]
dream car. I love this body kit. longer exhaust pipe would be great. wonderful car..
Much appreciated!
I kept the tips shorter to prevent the exhaust from being damaged in case of wall taps while drifting.
Dream build, One day my FC Rx7 will have LS and be a drift only car. For now she's just sitting pretty.
Show off! Looks cool
Where did you get the intake tubing for your 102mm throttle body?
Got it from amazon actually. 4” pipe. I cut it down to fit.
Upgr8 Universal Outside Diameter Polished Aluminum Pipe (4.0"(102MM), 45 Degree) www.amazon.com/dp/B00S8X7A5E/ref=cm_sw_r_cp_api_i_PereDbCRVX3EF
i like ya car g
Much appreciated!
Nice build! What trans is in it?
Appreciate it!
T56 trans from a camaro.
what exhaust setup are you using?x pipe? mufflers?
3" Dual stainless steel with custom x-pipe and vibrant mufflers, 1 3/4" long tube headers.
why did you go with LS instead of rotary?
Same reason as most people, wanted a simple N/A reliable setup. I bought this car with a blown up rotary with the purpose of making it a track car. It was rotting in a field when I bought it.
@@x_Heffe_X but the rotary sounds better
@@deeevvvaaaaa hard disagree.
What kind of bumbers and over fenders are you running ?
Bumpers and side skirts are BN style I got from Amazon.
Front and rear fenders are 50mm hotline performance.
Paint looks good! I'll still spank it tho
Mike Coolbaugh maybe, it ain’t fast, but it ain’t slow...
@@x_Heffe_X my car is a pig with a big cam I'm sure it's prolly quicker than mine lol
Wish my fc was this cool
Where did you get your wiring harness
The engine harness cane with the engine. The body harness is the stock Rx7 one.
Didn’t order a pre-done harness or anything. Followed the tutorial on granny’s speed shop website. Worked perfectly. Stock gauges all work except the speedo, but you can even make that work with some fancy box they sell.
@@x_Heffe_X Thank you
is that gpsports all around?
Jay Weezy it’s duraflex bumpers and side skirts I ordered from amazon. Front fenders and rear over fenders are Hotline Performance 50mm
Heffe thank!
is it a LS 1
Yes, LS1 from a 99’ Camaro.
for sale?
idrisu1 I suppose everything has its price, but no wasn’t posting this as a for sale vid. Just got it painted recently and wanted to get a nice little video of it.
Ls1?
Yes, 99' Camaro z28 LS1.
I have a 91 rx7 Savanna that i want to drop an LS3 in
@@codysettlemyre8083 I approve of this idea!
That's a mean ass 3 rotor
Looks cool but I just don’t like the Camaro bumper
Understood.
Poor car ;'( you should have welded your own frame instead of swapping from rotary. Disregarding the previous blown engine. An old corvette with that engine set up is more your style.
This car was rotting in a field with a blown up rotary. I saved it from that and brought it back to life and turned it into a pretty cool car(in my opinion of course).
Judging by the tone of your comment however, nothing I say will make you understand or comprehend why I built the car the way I did, and that’s fine. Appreciate your comment anyhow.
@@x_Heffe_X Well we all appreciate the body of the car that you saved because the body work you did is beautiful. Looks and seems like a car you would be keeping for life as a dream car for your future family so I absolutely respect your choice in the engine that you put in. As far as my opinions are concerned I'd look every where I could for a new rotary engine.
I'm sure your car hammers through turns though :]