Hello everyone! For a long time I was going to assemble the machine more seriously than I was before ... And what happened, exceeded all my expectations! Original Video [TeraFox] - • РЕЗУЛЬТАТ ОГОНЬ!!!СТАН...
Wait, whaaat? 5:00 drilling a keyway. 8:43 slides a scratch built vise in the shot. 9:23 center drilling a running motor shaft. And a sweet belt sander, compact and powerful. Nice work
Прикольный гриндер и аккуратно сделано! Но, с твоего позволения, дам пару советов - ведущий шкив сделай конический, как и натяжной, это даст более точное и устойчивое центрирование ленты. Натяг делай не через болт, а через пружину, она компенсирует неровности ленты и у тебя пропадут колебания при обработке. Ты маленькую детальку обрабатываешь, а ленту заметно водит, это именно от твоего глухого натяжителя. Станок ТВ 320?
THANK GOD, SOMBODY WHO KILLS THAT "BLADT YOUR HEARING TO HELL" VOLUME WHEN MACHINING METAL!! Yeah, great work too. I wish I had a lathe, plasma cutter and TIG welder.
You probably want to bolt it down to something that won't move. And maybe have a few different diameters so that you can grind down corners more easily. Version 2, I suppose?
я почему-то подумал что вы поляк, у них тоже руки от куда надо, мне понравиллсь видео, моторчик от стиральной машины с регулятором китайским лучше и дешевле!
1.5kW, 2880rpm 3 phase. You can use single phase but size of motor will be big and bulky. You can try PMDC motor with speed controller too. But burr will get attracted to magnet. That is the minimum power required for any belt grinder for successful operation. Anything less than 0.75kW will get stalled during grinding.
@@michaelclark2840 hi ...i am in process of making one, using 3450 rpm 1 hp 120 volt motor, enough for my needs. Wil make the 5 inch drive roller wheel, from hardwood. lighter and less strain on motor end bearing. Am gathering all/any info on these, on youtube......good day, Mike
@@petersack5074 hey bud. Did you build your's? I'm in the states and wanting to build one that will accept 48" belts as they are more common and will last longer. Mine will be mostly be used for knife sharpening. Do you know if a simple/inexpensive way of slowing the belt speed down to 1700/1800 RPM without spending the money going variable speed? Thanks
no bs noise, i say. most guys/people are wasting good elecrticity, whilst trying to 'entertain' us......no place for grunge/rap/metal 'music' = noise, unwanted and uncalled for good on you.
Wait, whaaat? 5:00 drilling a keyway. 8:43 slides a scratch built vise in the shot. 9:23 center drilling a running motor shaft. And a sweet belt sander, compact and powerful. Nice work
Incredible work, congratulations!
Excellent engineering skills! Great job! 👍
Man some people are just so talented. I wish I had your skills and your tools
Great job. It's worth the effort to make a high quality machine like this.
For me, who likes making tools by hand, you are the perfect learning object!
Thank you for showing us this technique in making a belt grinder.
Marvelous work.
Well done ... I lol at your TIG welding it looks like my welds ... But that's why they invented grinders and paint lol ...
Keep up the good work Gym_
Interesantes ideas trataré de ponerlas en ejecución lo mas pronto posible .¡Gracias por tantas idea brillante !
Best DIY to do in home. Very easy
Damn I wish I had that thing!!!! You should make and sell these they are beautiful!
Прикольный гриндер и аккуратно сделано! Но, с твоего позволения, дам пару советов - ведущий шкив сделай конический, как и натяжной, это даст более точное и устойчивое центрирование ленты. Натяг делай не через болт, а через пружину, она компенсирует неровности ленты и у тебя пропадут колебания при обработке. Ты маленькую детальку обрабатываешь, а ленту заметно водит, это именно от твоего глухого натяжителя.
Станок ТВ 320?
Я не очень опытный, но про натяжение ленты вы правы!
Genial!!!!!! Saludos desde Posadas, Misiones Argentina.---- Brilliant !!!!!! Привет из Посадас, Мисьонес, Аргентина
889
Excelente trabajo 👍 mis felicitaciones 👏👏👏
Such a beautiful and professional looking result! I prefer to buy cheapo chinese belt grinder for my incidental adhoc needs anyway.
Where can you get such metal cuts for a inexpensive fair price? Who knows a good provider?
Very well done.
Awesome nice creation
Great work sir
Exceptional work is it possible to have the projects to try to make it ? Well done
do you have plans and how large a motor
Great job
당신의 대단한 기술에 구독합니다.
안전제일입니다!
мне кажется, что дешевле новый купит. А вот тиски мне ваши понравились. Быстрый зажим очень хорошая идея.
Good job working 👍👍
THANK GOD, SOMBODY WHO KILLS THAT "BLADT YOUR HEARING TO HELL" VOLUME WHEN MACHINING METAL!!
Yeah, great work too. I wish I had a lathe, plasma cutter and TIG welder.
Nice compact Machine...!!
Круть!!! Все детали нарезаны, подогнаны... Мнеб так, ато все болгаркой...
С таким станочным парком можно любой агрегат соорудить!!!
А можно и купить ).
@@sinner_007 он уже потратился на станочный парк ахахаха
Отличная работа!!!!
You probably want to bolt it down to something that won't move. And maybe have a few different diameters so that you can grind down corners more easily. Version 2, I suppose?
Bro next level 🔥🔥🔥❤️❤️
That looks like a kit you bought. If so, from where? I just ordered a gundog forge 2x72 weld together kit.
Сразу видно, что мастер иностранец. У нас мастера этот станок делают на коленке при помощи болгарки и сварки. Результат такой же.
По немецки "цацки пецки" а по русски бутерброд)
Nice Technique
I would worried welding current going through the motor bearings
Подскажите что за модель станка токарного на видео ??
Какой-то старый СССР?
Очень хорошая работа! Поздравляю. Поздравления из Аргентины.
I've just bought a drill at a grocery store near my home, let start to make this project.
Ha Ha. Did You Finish Your Project?
Круто сам сделал своими руками . Лайк!
Me thinks you’ve plenty of horsepower there!!!! Understatement!
Front plate not moving angularly?
Excelente !
That belt tension adjuster needs to be spring loaded.
Yeah it's just going to unscrew itself overtime
Круто👍
А меня всё нарезано в деталях , наточены колёса,ленты уже высохли)),а собрать два года время не выделю
))
Nice job
За 13 минут сделал гриндер. 👍
Я старался))
😍😍😍😍
При таком парке механизмов иного не дано, класс
Adorei sua lixadeira pode vender o projeto?
I want make too, success for you
👏🏿👏🏿👏🏿👏🏿
Nice grinder i'm thinking of building one too, Did you find any issues with not putting a crown on one pully
He did put a crown on one pulley, it's in the video.
superb ...
please tell me what type of welding machine do you use?
TIG welding.
Prob best on CZcams,
EXCELENTE TRABAJO
Isso é top hein!
Good job! I have a question. How long is the sanding belt? Thank you for your answer 😊 Greetings from Poland!
Hello! 915 mm.
@@Newterafox ile milimetrów ma koło pasowe
May I ask Is that 2x48 ?
Great work 👏👏👏
😉😉😉😉👌👌👌👌👌👌
if you all need the machine looks like in this video,
We also SELL it.
EMAIL / CALL US NOW!
Where did you get that kit, please?
He made the design and outsourced to CNC plasma cutter. I don't think it is a readily available kit.
besides being a racing driver do u also make ice cream?
That's not making.. that is assembling 😁😁😁
@Vishob Vikraman -- A bit of both, I would say.
How much ? to thailand
я почему-то подумал что вы поляк, у них тоже руки от куда надо, мне понравиллсь видео, моторчик от стиральной машины с регулятором китайским лучше и дешевле!
Needs chip shields on top for sparks
👍
Why two capacitors?
The only drawback is the base is not stable enough!
You ever think about making them as a kit and selling them
Ohne Plan , ohne Masse.....
What is the belt length 42”?
915mm
Nice build. What is the motor rpm and Kw please? Can't really see it in your video
1.5kW, 2880rpm 3 phase. You can use single phase but size of motor will be big and bulky. You can try PMDC motor with speed controller too. But burr will get attracted to magnet. That is the minimum power required for any belt grinder for successful operation. Anything less than 0.75kW will get stalled during grinding.
@@pramodm3540 thankyou very much👍
@@michaelclark2840 👍
@@michaelclark2840 hi ...i am in process of making one, using 3450 rpm 1 hp 120 volt motor, enough for my needs. Wil make the 5 inch drive roller wheel, from hardwood. lighter and less strain on motor end bearing. Am gathering all/any info on these, on youtube......good day, Mike
@@petersack5074 hey bud. Did you build your's? I'm in the states and wanting to build one that will accept 48" belts as they are more common and will last longer. Mine will be mostly be used for knife sharpening. Do you know if a simple/inexpensive way of slowing the belt speed down to 1700/1800 RPM without spending the money going variable speed? Thanks
Wow, and how sweet! NO SHITTY MUSIC.Thanks
no bs noise, i say. most guys/people are wasting good elecrticity, whilst trying to 'entertain' us......no place for grunge/rap/metal 'music' = noise, unwanted and uncalled for good on you.
What is the horsepower on that motor
1.5 kWt
Крутой канал 👍
На какую длину ленты гриндер?
На какую длину лентапр
Сдравствуймама
На сколько я знаю это же терра Фокс канал?))
Yes it's me)
👍👍👍Заказать можна такой гриндер?
Почему лента так сильно гуляет?
6:38 бочка неправильная!!! Правильная, когда в середине плоскость, 1/3 например!!!
ชช
ชช
ช
ช
ช
а если у меня один напильник я смогу сделать?
Неплохо
где звук
можно добавить ещё 5 роликов
Very complicated!!!
this is not DIY concept.. you used all advance machines...
Ok
Слишком много токарки
+++
Kurang sefty
Размеры хоть можете сказать? Не интересно так . молчишь всё время
"assemblying" a belt Grinder
это не твоё видео
Моё)
@@Newterafox не твоё я прекрасно знаю
Пари?
Ты что воруешь чужие проекты, сделай сам
Сам у себя я не могу воровать))
Херня! 25 - магнитов, 30 - болгарок ... Сделал бы обычным нормальным топором - было бы на что посмотреть.