Two Argo HDI's and a MaxIV at Big Nasty ATV Park Effingham County Georgia

Sdílet
Vložit
  • čas přidán 13. 06. 2014
  • Two Tracked Argo HDI's and a MaxIV at the Big Nasty ATV park June 14th 2014. Since I have another tracked Argo with me I ran into the worse mud conditions I could find, in all the years I have been running AATV's and ATV's I don't believe I have ever seen mud conditions as bad as these. Even I was surprised that the Argo's could move in some of the sticky swamp mud with very little water.
  • Auta a dopravní prostředky

Komentáře • 32

  • @ronytobadak5431
    @ronytobadak5431 Před rokem

    sy dari indonesia menyukai karya anda,, saya ingin miliki sperti anda,, sukses selalu dan Tuhan memberkati anda

  • @juliannaaka-babayega8941
    @juliannaaka-babayega8941 Před 5 lety +1

    This was AMAZING! Thank you for the footage. Really kewl machines! Driving was impeccable all-round. Thanks for the great footage folks. :) Fred is pretty cute tho... ;) Just say'in...

  • @delcasaleexcavating9508

    That's very cool !

  • @senopatitanpalencana9302
    @senopatitanpalencana9302 Před 4 lety +2

    Yeeeyyyy... I have mini Tank Now.. !!!! 😁😁😜

  • @dedwards8708
    @dedwards8708  Před 4 lety

    You will enjoy it, nothing beats an Argo with Adair tracks in swamp and mud

  • @GunnyE9
    @GunnyE9 Před 5 lety +1

    YEAH BUDDY !!!!

  • @sartainja
    @sartainja Před 5 lety +2

    You made that look easy. Those ARGO with tracks are mud hogs.

    • @danedwards1592
      @danedwards1592 Před 5 lety

      I am always surprised by just how capable these machines are in extreme conditions

  • @231MasseyFerguson
    @231MasseyFerguson Před 8 lety

    Thanks. Yes that answered some questions.
    Where are the inner and outer bearings and do they have grease fittings?
    How many chains and sprockets are on it?
    How difficult is it to tighten/adjust the chains?
    How long does the chains/drivetrain last?

    • @dedwards8708
      @dedwards8708  Před 4 lety

      Inner bearings are in the frame, outer bearings run through the frame and through the plastic body, Bearings are double sealed and all bearing have a grease fitting. All the wheels have a hole you can fit the grease fitting through to grease bearing without removing the wheels. These machine rarely leak water.

    • @dedwards8708
      @dedwards8708  Před 4 lety

      Chains are shelve adjusting has a total of ten chains, very little maintenance on these very reliable machines

  • @231MasseyFerguson
    @231MasseyFerguson Před 8 lety

    Now that looks like a lot of fun. Had many ATVs but never owned an Argo.
    Is there a lot of maintenance and up keep on them?
    What kind of engines do they have?
    I'm in south louisiana where there's plenty swamp land around.

    • @silenceofthehams6902
      @silenceofthehams6902 Před 8 lety +3

      Hey if you live there you have to run an Argo. And I would HIGHLY recommend the Adair Pro Series 14.5" wide tracks. You will be absolutely amazed at where you can go that other ATVs & SXS can only think of going. If you get one I would buy one that is an HD model with the hood fan. Maintenance is greasing the bearings keeping the chains lubed with a good chain lube and tire pressure etc. I will make sure I grease my bearings inner and outer every other run. Depending on the conditions I was running in. There is always some maintenance to anything. It's not as bad as some have made it out to be. I work on my machine and have swapped all the bearings and axels for HD axels & bearings etc. with no problem. You will be hooked once you drive one of these. Florida Fish & Wildlife runs the XTIs down in the Everglades with tracks. They run through everything down there with no problems and it doesn't damage the environment. Hope that helps!

  • @mrlariata9290
    @mrlariata9290 Před 4 lety

    Looks like fun. I guarantee I will buy one soon.

  • @alcopower5710
    @alcopower5710 Před 3 lety +1

    Give that Max some tracks

  • @silenceofthehams6902
    @silenceofthehams6902 Před 8 lety

    Hey Dan, Hope your Memorial Day Weekend was good and you were able to get out and do some exploring? I know you guys had a bunch of rain over the weekend and was needing to find a new place to bring my machine to. This place looks like it. Is there lots of water & mud still? I went to Hog Waller over the weekend and was hugely disappointed. Everything had dried up and areas that had water 4' deep were dry as a bone. It was one big dust bowl. I spent more time riding around searching for mud it was boring as shit. And when I did find mud it was nothing worth a challenge. Quite the difference from when you were out there last. Let me know if your going to head that way and I will meet you guys there.

    • @dedwards8708
      @dedwards8708  Před 8 lety

      I don't know what the mud looks like at Big nasty right now but you can generally find some good stuff anytime

    • @silenceofthehams6902
      @silenceofthehams6902 Před 8 lety

      Yeah I've been to Hog Waller a couple of times since I got my Argo back and it's been disappointing to say the least. I have yet to find anything that will challenge the Adair tracks

  • @3DMachines
    @3DMachines Před 10 lety +2

    I need those machines

  • @kb9ylu
    @kb9ylu Před 10 lety +2

    love riding my motorcyle but this looks alot funner

    • @silenceofthehams6902
      @silenceofthehams6902 Před 8 lety +1

      Hey man so do I but it's always good to have more hobbies than one...:)

  • @garynolen1677
    @garynolen1677 Před 7 lety

    were are u at

    • @danburch9989
      @danburch9989 Před 6 lety

      N32.168, W81.293 About 15 mi NW of Savannah GA as the crow flies.

  • @jeffycump523
    @jeffycump523 Před 2 lety

    What a scky trail ride

  • @PsychobillyVW
    @PsychobillyVW Před 6 lety

    throw some tracks to that max

  • @SuperRuss52
    @SuperRuss52 Před 8 lety +1

    Off road is a lot ,ore fun than street racing

  • @rajeshdinkarrasal753
    @rajeshdinkarrasal753 Před 5 lety

    Naive footage