WeCreat Vision Laser Engraver and Cutter Unboxing, Setup & 1st Project
Vložit
- čas přidán 14. 12. 2023
- If you're curious about laser engraving or considering purchasing the WeCreat Vision 20W Laser engraver and cutter, this video is a must-watch!
Seize the Season's Savings with Wecreat Vision's Holiday Sale! Act Now to Ensure Early January Delivery and Enjoy Up to $400 in Savings!
Buy a WeCreat Vision 20W 5 in 1 Laser Engraver and Cutter here: shareasale.com/r.cfm?b=234405...
In this video, we dive into the exciting world of laser engraving and cutting with the WeCreat Vision 20W Laser engraver and cutter! Join us as we unbox this incredible machine, set it up step-by-step, and laser engrave and cut our first project.
Don't forget to like, comment, and subscribe for more exciting content and in-depth reviews of tools and equipment that fuel creativity. Let's unleash our creativity together with the WeCreat Vision 20W Laser engraver and cutter! ✨🔍✂️"
#laserengraver #laserengraving #lasercutter #lasercutting #diodelaser
#Bestlaserengraver #Wecreat #Wecreatlaserengraver #Wecreatlasercutter
#WecreatVision #Wecreatvisionlaserengraver #WecreatVisionlasercutter #lightburn #Rotary #Enclosure #AirAssist #SmokePurify
🔗 Cricuter's Deals
Sign up for Creative Fabrica's FREE trial here: www.creativefabrica.com/promo...
Or sign up for Creative Fabrica's discounted yearly subscription here: www.creativefabrica.com/ref/2...
For the best deals on a Cricut machine, shop here: cricut.pxf.io/DV9Nvn
Accept credit card payments right on your phone easily with your FREE Square Card Reader: square.sjv.io/5bndzb
Check out my linktree: linktr.ee/CRICUTER
Check out my favorite laser engravers here:
LaserPecker LP4 here: shareasale.com/r.cfm?b=203048...
WeCreat Vision 20W 5 in 1 Laser Engraver and Cutter here: shareasale.com/r.cfm?b=234405...
xTool M1 Laser Engraver and Vinyl Cutter
US Store: bit.ly/49YQ8xP
DE Store: bit.ly/3V5wjkq
EU Store: bit.ly/4bXCHA1
📣 Connect with Us:
Email: Cricuter@yahoo.com
Blog: cricuter.com/
Facebook Group: / cricutsvgs
Facebook Page: / cricuterblog
Instagram: / cricuterblog
Pinterest: / _created
CZcams: / @cricuter
Some of the links provided are affiliate links. Cricuter is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase. - Jak na to + styl
Have you heard the exciting news?! WeCreat has finally launched their new 2w Infrared Laser Module allowing you to transform your 20w diode laser into a 2w IR laser! Now you can engrave previously off-limit materials like gold, silver, stainless steel, metal and more! Learn more about it here czcams.com/video/F7EJeTvqeMs/video.html and purchase one here shrsl.com/4hu09
That’s so neat! 🎉 I can’t wait to see what you create! I’ve been wanting one but don’t have the space or the funds to purchase one! ❤ congratulations on your new crafting toy! Thank you for all of your wonderful cricut videos, I’ve learned SO much from your channel! Thank you for making such great videos with clear steps/instructions! ❤
Aww thank you, you're too kind! I'm glad my channel has been helpful for you 🥰
Too funny! You started the video as if you knew exactly my steps of doing things in my little craft life! I just received my WeCreat. Did not connect it to my computer yet, need time to do it this weekend. The only comment I have is, the booklet says you need to put the grates with the bolts up, not sure why it matters. Also, the air assist tube fits snuggly onto the thingy by being stretched, no need to add additional connector. Just put it on an angle at first and slide in. It worked for me. It is supposed to be tight.
Thank you for clear and precise setup instructions. I followed to the end and couldn’t understand why my screen wasn’t displaying like yours, not until I installed the software. LOL!
You're welcome! I'm glad you figured out the issue!
On the air assist - the black tube - if you just heat it up w the palm of your hands it will spread directly over the male part.
Just got the vision and setting it up using your video to reference. Question, is the bar that the laser on straight or is it offset by a quarter of an inch? I’m curious to see if I have to reach out to support before I go any further.
Does this product need to be connected to the internet to function? The Glowforge is set up the that way.
Thank you for the clear instructions! My removable tray was separate from the laser and didn’t know how to install the grates due to laser head! Glad I came across your video! I bought this to do tumblers as I used my other lasers for other items; will you do tutorials as I never done an engraved tumbler before?
You're welcome! I'm glad it was helpful. I actually just uploaded a Tumbler tutorial a few days ago: czcams.com/video/xYO9_Sie3Vg/video.html and yes I do plan on making more WeCreat tutorials
@@Cricuter thank you! Where do you place the air assist unit? Behind the laser or just next to it? My other lasers have air assist inside laser so not sure if that matters!
@@mariezhitkov3794 anywhere that it reaches, it doesn't matter
Thanks for doing this video, I ran into the same problem as you, the end with the blue thing was missing that little black tube, and I have nothing to replace it with, I had to contact support. Bummer I was so excited to get it set it up and use it .😪
My hubby recommended going to a hardware store and picking up a 5/16 fuel line.
The Cricut as a gateway “drug” in crafting…I felt that in my soul. The only thing I haven’t done is sublimation lol
Omg I'm addicted to Sublimation lately! My daughter told me the day of her birthday party that she NEEDED a custom birthday shirt so I banged it out in like 5 minutes. Print then heat! I've seen the Epsons you can convert at Costco go on sale for $199
Can you engrave and cut acrylic with the we creat?
It can but it has to be dark colored for the camera to pick up. I believe there's a hack around this if you want to do clear, but I haven't tried it yet. I heard if you put painters tape or some other specialty laser spray over the clear acrylic then laser can cut and engrave through it. Same thing with clear glass.
Didn’t take them long to get on the bandwagon did it?
I'm not sure what you mean by that, but it's a cool little machine. I've been having a lot of fun with it.