Overengineering a Toaster Oven into a PID controlled Tempering Oven - ElementalMaker

Sdílet
Vložit
  • čas přidán 31. 07. 2020
  • In this video we convert an old toaster oven into a higher temp capable PID controlled tempering oven for use with tempering and chemistry projects.
    -Please help support this channel directly through Patreon: / elementalmaker
    Parts List:
    PID controller & Solid State Relay - amzn.to/3guiCEc
    1/2" Ceramic Fiber Insulation - amzn.to/30hnFlW
    Satanite Refractory - amzn.to/3acFKoz
    Silicone 200°C Rated Wire - amzn.to/3k9OIYq
    Polyimide (Kapton) Tape - amzn.to/3fjVWW7
    Copper Crimp Connectors - amzn.to/3gjm7xq
    -Please save this link as your amazon homepage, so when you shop its supports the channel: goo.gl/x1ehvA
    -Alternatively Paypal Donations can be sent through here: www.paypal.me/ElementalMaker
    -Follow me on Instagram @ElementalMaker ElementalMaker
    -The above contains amazon affiliate links which earn the channel a small commission and help cover material and video costs.
  • Věda a technologie

Komentáře • 216

  • @ElementalMaker
    @ElementalMaker  Před 3 lety +24

    Thanks for watching! Parts list in description. Please help keep the channel sponsor free at www.patreon.com/elementalmaker. Every patron gets a virtual hug and my unending appreciation. I will also build a small shrine to worship you. One of these is a lie.

    • @purelife9000
      @purelife9000 Před 3 lety +2

      Just worship Jesus, but I'll sign up for the virtual hug, Bob!!!! 😉 And I Tweeted my support to 13,100 people. You do great vids, keep it up!
      @The_L_Humphreys

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +1

      @@purelife9000 thank you so much Luke!

    • @MichaelMantion
      @MichaelMantion Před 3 lety +1

      When applying thermal compound you do not want to trap air, as it is obviously not a good conductor of heat. its best to make either a line or drop in the middle then push together till it squeezes out the edge. The best stuff i found is the theremal epoxy from the tech ingredients youtube channel. They sell it on ebay. Let me know if you need more information.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +1

      @@MichaelMantion You are absolutely correct. This ssr isn't as critical as a CPU, and was significantly larger than a CPU's lid, so I just went with the slather and go approach. When I build my editing rig I used arctic silver (with the proper application technique lol). I wish tech ingredients compound was around back when I built it. How are your temps with it compared to other thermal compounds?

    • @tek4
      @tek4 Před 3 lety

      When the elements burn, and I sadly think they will, look up nicrome /kenthal wire on Amazon. A hundred feet is like 10$ for 24 guage or 20 guage.
      You can spin new elements similar to kiln type and get a high enough resistance to run them, and have a higher temp rating. Use the lathe and dowel method slow speed to wind em and it's how I make my shitty kiln run

  • @RichardCranium321
    @RichardCranium321 Před 3 lety +81

    "Don't do this at home"
    I see you're at your in-law's again... 😉

  • @reapermfg
    @reapermfg Před rokem

    Commentary alone makes this video! Hats off to you, sir!

  • @livedeliciously
    @livedeliciously Před 5 měsíci

    Incredible commentary. My type of humor. I'm also now more educated on how to build my own Chinese fire starter.

  • @sifi3638
    @sifi3638 Před 3 lety

    bro u r the most chill ass person i've seen

  • @michaelrobertson8795
    @michaelrobertson8795 Před 3 lety +29

    Yes sir I'm an industrial electrician and we used a bunch of the solid state relays.👍

    • @procactus9109
      @procactus9109 Před 3 lety

      In your opinion, how reliable are they, and is there anything you know of that kills or shortens their life ?

    • @Jimmeh_B
      @Jimmeh_B Před 3 lety +5

      @@procactus9109 They're pretty solid.

    • @firstmkb
      @firstmkb Před 3 lety +1

      ProCactus well, heat isn't good for any solid state device, so keep them cool.
      Just a joke - don't know as much as a pro, and you're not going to keep anything cool inside an overclocked toaster oven. Heavy gauge wire and mounting the relay elsewhere (not in the oven) would help.

    • @DMWatchesYoutube
      @DMWatchesYoutube Před 3 lety +1

      @@Jimmeh_B ha!

  • @itsevilbert
    @itsevilbert Před 3 lety +2

    Thanks for the tip about SSR's failing short circuit. Very useful knowledge to share.

  • @michaelrobertson8795
    @michaelrobertson8795 Před 3 lety +12

    You got to do the Ruby thing again man that was awesome🤯

  • @livedeliciously
    @livedeliciously Před 5 měsíci

    Just wired up my toaster oven using your schematic. And no magic smoke or sparks. Thank you kind sir.

  • @Mrcaffinebean
    @Mrcaffinebean Před 2 lety

    So I decided my old toaster oven needed replacing because it was looking pretty old (still working but ugly). So I bought a new one and now I have a toaster oven for the shop.
    And suddenly I remembered this wonderful video. I already have the materials from building a forge just like yours. Needless to say, mega toasting is in my future!

  • @cameronbruce1862
    @cameronbruce1862 Před 6 měsíci

    I would add a "Thermal link" or two. Most appliances these days often incorporate them. Loved the thermal transfer link for temp sensing, original thinking.
    Often the UL requires these in transformers, usually buried deep in the windings and when they trip, blow the insulation of the transformer has been heat stressed out of specification and are no longer UL compliant. Hence their location.

  • @countryautobody7079
    @countryautobody7079 Před 3 lety +2

    700 dungarees Frankenstein now that's hot! great video as always .

  • @CLMCR8
    @CLMCR8 Před 3 lety

    I made one for Decarboxylating . I use an old gutted PC power supply (box) and it's fan to cool the SSR. All in one deal PID controller, SSR, cooling fan with power switch. Use the oven timer to prevent stuck SSR.

  • @justinbanks2380
    @justinbanks2380 Před 3 lety

    Entertaining and informative as always!
    I love your 'color commentary' and humor.
    Can't wait to see what you do with this.
    Hope you and the family are better from your illness.

  • @RichardCranium321
    @RichardCranium321 Před 3 lety +23

    Imagine trying to pitch this to any network - "So, I buy a $10 toaster to take apart and rebuild it better. People will LOVE IT!! So what do you think?..." 😅
    But somehow its entertaining as always. 👍🏼

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +8

      Haha I was literally thinking that the other day. I could kind of see Mythbusters doing something similar, but that's about it. Or of course junkyard wars back in the day

    • @RichardCranium321
      @RichardCranium321 Před 3 lety

      @@ElementalMaker still high quality as always... Hope everyone's feeling better! Oh, also, I kno u use patreon but they might be in some legal/financial trouble, may wanna look into Subscribestar.
      czcams.com/video/Px46aTSuX2g/video.html

    • @bdf2718
      @bdf2718 Před 3 lety

      Yes, but does it result in classic lines like "The sausage roll has malfunctioned"? czcams.com/video/JBEEgkuowH4/video.html
      And czcams.com/video/Ekjt_HuLD9w/video.html

  • @godfamilycountry4211
    @godfamilycountry4211 Před 3 lety

    Pretty cool. Learned a lot. Novice to all your technical talk but find it so interesting. Thx

  • @hanleypc
    @hanleypc Před 2 lety

    Excellent video, opened my eyes to just how affordable PID controllers are and some projects I can have a look at!

  • @walmartsuxhard
    @walmartsuxhard Před 3 lety

    Haha i took apart a toaster oven for a deep clean and i did exactly the same thing with the door. Great work EM.

  • @michaelrecine7626
    @michaelrecine7626 Před rokem

    I'm currently doing a similar build with an old toaster oven right now, but I'm making it into a reflow oven. I was super confused as to how the temperature control in the oven worked (mine uses the same method as yours). I appreciate you taking the time to explain it, it's actually quite ingenious even if less reliable.

  • @Derived_One
    @Derived_One Před 3 lety +5

    I know someone created a PID library for the Arduino; which, would allow for the addition of MQ2 sensor and a fail safe relay for dumping AC in case of an emergency.

  • @bobgrant-beer3020
    @bobgrant-beer3020 Před 3 lety

    Great Stuff as usual EM. Love it. 👍🍺

  • @Matt_The_Hugenot
    @Matt_The_Hugenot Před 3 lety

    Nice build.

  • @prometheus4916
    @prometheus4916 Před 3 lety

    Love my pid 's they can do so much great video

  • @5in1killa
    @5in1killa Před 3 lety

    Happy to see a new video, I was worried about you, hope all is well.

  • @BensWorkshop
    @BensWorkshop Před 3 lety +1

    Just watched an advert for an Emerson solid state pressure gauge, extolling its safety features. I think they are advertising on the wrong channel. ;)

  • @SkepticNerdGuy
    @SkepticNerdGuy Před 3 lety

    This is pretty neat, I am planning on building something like this, not to get to such a high temp, just be more accurate in order to temper 3d print builds. Some of the instructions i have found use exactly the same PID you did. So its nice to see a video implementing pretty much the exact same thing.

  • @dcallan812
    @dcallan812 Před 3 lety

    I did check my subs list for you yesterday as I thought we were due some entertainment. Sorry to hear about the family getting sick. I managed to get out last week so that's 4 times this year that I manage t get past the front door!. Stay safe ( I am)

  • @wwrite
    @wwrite Před 3 lety

    Cool shit, love it!!!

  • @strolantic2930
    @strolantic2930 Před 3 lety

    thank's Il love your Work
    i watch your video form france

  • @SeanBZA
    @SeanBZA Před 3 lety

    Chinesium SSR's invariably at the low price end are almost always going to be an 8A Triac and a zero cross switch salvaged from some ewaste, and then get the label applied saying 10A, 16A, 25A or 32A, irrespective of the parts used inside. They might have actually used a screw or rivet to attach the device, but have been known to just leave it with a blob of thermal paste and a mica washer as heat transfer method and insulation. They are also known to use non insulated tab triacs and rivet or screw them down direct, so you can be glad that the wire they use inside is often thin enough to act as a fuse.

  • @soranuareane
    @soranuareane Před 3 lety +2

    Glad you're safe. Was just thinking about you a few days ago, wondering how you were doing.
    The virus has taken so many lives and I'm glad your family aren't contributing to those numbers.
    Take your time on the uploads. We want you safe. But if you do burn down your house, catch it on video will ya? Edit out the parts the insurance adjusters want, of course.

  • @Jimmeh_B
    @Jimmeh_B Před 3 lety

    VERY good advice on the use of an SSR with those PID's, or at least an external relay. I''ve had several of them fail catastrophically. The mechanical relays they fit inside them are WAY under spec and poor quality. One memorable one was driving only a 400w load and failed in short order. When the contacts tried to open they were partially welded shut, eventually the heat generated melted them open again but because they were red hot and deformed the resultant arc didn't clear and set the entire unit on fire.

  • @maxxexcaliber1233
    @maxxexcaliber1233 Před 3 lety

    Glad to see your latest offerings. No worries about the delay. I was just thinking about you today.😂

  • @Aleks_Z
    @Aleks_Z Před 3 lety

    I find it funny how you mentioned LTT while applying thermal paste

  • @mrgodBG
    @mrgodBG Před 3 lety +4

    It's like you are AvEs lost brother - you sound a LOT like him, speek similiar and editing also :) I would wish to see colab between you and AvE

    • @VexChoccyMilk
      @VexChoccyMilk Před 3 lety +1

      I'm not entirely unconvinced that they are the same person using different microphones on each channel.

    • @manishholla
      @manishholla Před 3 lety +1

      Seriously dude... My reaction was the same.... I checked his and AvE's channel so many times to look out for similarities... They both are different persons... 😅

  • @haroldarmstrong6288
    @haroldarmstrong6288 Před 3 lety

    You come up with the coolest s*** I always enjoy your stuff

  • @sarchlalaith8836
    @sarchlalaith8836 Před 3 lety

    Hope you feel better soon cohort.

  • @juggaloforlife4682
    @juggaloforlife4682 Před 3 lety

    I love it

  • @hiiambob89
    @hiiambob89 Před 3 lety

    Oooooh, I've been waiting for a new vid

  • @lithostheory
    @lithostheory Před 3 lety +13

    You could make some great Napolitanian style pizzas in that oven :^)

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +8

      I never even considered that, but might have to try it! 😁

    • @ImFromIowa
      @ImFromIowa Před 3 lety +2

      @Lithosptheory you may have to send him a recipe on that.

  • @BatPotatoes
    @BatPotatoes Před rokem

    I'm not going up to 700F with mine but I'm gonna copy some parts of the insulation job for my little Toshiba toaster, thanks for the visual aid!

  • @clusters1.033
    @clusters1.033 Před 3 lety

    700 degrees eh? I'm thinking you're not going to be making toast with this oven. Either that or just made the world's fastest cooking toaster oven. Anyway, glad to see a new video and that you are doing well.

  • @pulesjet
    @pulesjet Před 3 lety +5

    Nice SMD Reflow oven ya built.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +1

      Great idea for it 👍

    • @PyroRob69
      @PyroRob69 Před 3 lety

      If you had made the PID controller external, you could use this for a still controller, and to manage temps on your bullet casting lead pot.

  • @kennethyoung141
    @kennethyoung141 Před 3 lety +3

    Always look forward to your videos! Missed your humour! The Satan night ,who did you sacrifice in trade?

  • @joshrandalldisavows6697
    @joshrandalldisavows6697 Před 3 lety +2

    Missed ya pal!!

  • @Buzzhumma
    @Buzzhumma Před 3 lety

    Very good build bro 👍🏻i think i may do the same . I will be making a propane forge but i want a controllable temp forge as well and i think this might be the right design !

  • @mxcollin95
    @mxcollin95 Před 3 lety

    Are you an engineer? Well done man! Awesome build! Love project builds like this. Can’t wait to see how it works. 👍

  • @lithostheory
    @lithostheory Před 3 lety +8

    Was this inspired by Alex’ antics in his quest to make Napolitanian style pizza in a home oven?

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +17

      I actually thought this was an original project until I started it and saw about 600 other CZcamsrs have done similar videos lol.

  • @DMcMillions62
    @DMcMillions62 Před 3 lety

    Welcome back always appreciate your videos. Though I always laugh when people say 100 is hot, that is considered a break in the heat here in AZ. Phoenix hit 118 the other day.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Hey now you guys have that beautiful dry heat. Here it's 100 with 85% humidity, truly gross to experience.

    • @DMcMillions62
      @DMcMillions62 Před 3 lety

      @@ElementalMaker Very true however this time of year is our monsoons so the humidity is pretty up there, stay far away from AZ July and August

  • @jason-ge5nr
    @jason-ge5nr Před 3 lety

    im excited to see if the cal rods hold up.

  • @mute8s
    @mute8s Před 3 lety +2

    I am planning on picking up a toaster oven for powder coating some projectiles and while I don't need to worry about any of this for that it's always nice to see how things work in case I ever do need to ramp things up. I was just thinking if this doesn't work out for you I imagine you could probably get a lee lead pot for pretty cheap and that would definitely get up to temp for ya. Anyhow keep up the good work.

    • @jdecar1
      @jdecar1 Před 3 lety

      I got a real nice big convection toaster oven for the same purpose. It was too nice and has been serving kitchen duty instead. I might give it new life with this video though. Great idea.

  • @Z-Ack
    @Z-Ack Před 3 lety +1

    “Did that english right?” Lol.. good stuff..

  • @MrEric_API
    @MrEric_API Před 3 lety

    You can peel the Kaowool in half for thinner layers

  • @Aaron48219
    @Aaron48219 Před 3 lety

    I'm thinking the elements should be ok. Backyard Scientist did something similar with a full size electric kitchen oven a while back and got it up to 1300-1400f (786c) and melted aluminum for PLA casting. Search backyard Scientist kiln.
    I've been saving cpu heatsinks for years and Linus would be very proud of your compound application lmao.

  • @synthesizer8026
    @synthesizer8026 Před 3 lety

    One other issue with solid state relays is you need a massive heatsink as compared to a mechanical relay. But they are nice to work with.

  • @josepedrocruz8766
    @josepedrocruz8766 Před 3 lety

    Awesome video, gave me the urge to take over the toaster oven as well. A quick question, what is the brand of that mini torch you used to heat the switch? Can't wait to see the next video and thanks for all of the knowledge and content.

  • @maltesefireworks
    @maltesefireworks Před 3 lety

    thanks for this video exactly what i was looking for. but im using this scheme to make pizza.

  • @akefayamenay104
    @akefayamenay104 Před 3 lety

    I lol’d at "steel pubes"

  • @alwinalexander
    @alwinalexander Před 3 lety

    great video, like the explanation on the thermostat, mine doesnt even have any metal attached to the oven body to conduct heat, they placed a metal strip on the thermostat itself and run AC on it to heat up the bimetallic strip! btw did the thermocouple placement worked for you? i placed mine on the other side and it could not go beyond 100C with my oven setpoint at 150C even though my oven thermometer are showing well beyond 150C.. then i placed the TC through the door and then it manage to go to 145C

  • @bobedwards8896
    @bobedwards8896 Před 3 lety

    I might do this, need something very similar . Update after some uses would be appreciated

  • @spokehedz
    @spokehedz Před 3 lety

    You should also install the alarm wires, which would let you know if your SSR fails before it lights on fire... Hopefully.

  • @chrisellingson123
    @chrisellingson123 Před 3 lety

    I am literally building one of these for PCB reflow soldering.

  • @TroyRubert
    @TroyRubert Před 3 lety

    What are you doing with perchlorates?

  • @x9x9x9x9x9
    @x9x9x9x9x9 Před 3 lety

    Those PID controllers are super useful. I should probably pick a couple up. Also I have wanted to something similar to this and make a dehydrator box for 3d printer filament so maybe those will be my next projects.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      They are great for projects like that. Easy to set up and pretty cheap to boot.

    • @stamasd8500
      @stamasd8500 Před 3 lety

      I don't think you need a PID controller for such an application. I just store my filament in air-tight plastic boxes in which I also drop 1-2 of those rechargeable silica pack dryers (Eva-Dry, look it up on amazon). Keeps them nice and dry.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      @@stamasd8500 I found some really nice plug in rechargeable silica moisture control units at my local Aldi. Works great to keep my filament dry in a big plastic storage container.

    • @x9x9x9x9x9
      @x9x9x9x9x9 Před 3 lety

      @@stamasd8500 This would be for nylon. I store my filament in 3 large tubs that hold about 20 rolls each and a gallon of rechargeable desiccant per tub. However the nylon gains moisture so fast that I have to dehydrate it before every use even if I just left it on the printed overnight. Thats what living in a place with super high humidity will do to ya.

    • @stamasd8500
      @stamasd8500 Před 3 lety

      @@x9x9x9x9x9 Ah, I never used nylon. There days my go-to filament for almost everything is PETG.

  • @stamasd8500
    @stamasd8500 Před 3 lety +1

    Well if the heating elements burn out but the rest of the components survive, you can go all Frankenstein on the next victim and just move all the innards into it.
    I made a humidity- and temperature-controlled meat curing chamber using 2 of those PIDs. Very useful, once you understand the pseudo-English in the manuals.

    • @Garjahn
      @Garjahn Před 3 lety

      If it burns up, couldn't you just take a coil element out of something else, like a space heater, and use that?

    • @SeanBZA
      @SeanBZA Před 3 lety

      Just go grab a grill element from a small oven, and fit it in the case. Might have to make a few extra bends in it, but it will heat up faster then. Grill elements will work up to red hot fine for years, along with the bake elements, just because they are so inefficient at heat transfer otherwise. In such a small well insulated space they will actually get the whole lot up to red heat. Easy way to tell it is fine is when that aluminium tang melts off it's rivets.

  • @jaratt85
    @jaratt85 Před 3 lety +1

    You should play with magnatrons and see if you can replicate the happy accident that Jamie Hyneman did on Mythbusters.. He tried making a super microwave using 4 magnatrons inside a roundly 12 inch cube and one on each side and instead of heating it ended up cooling the stuff inside of it.
    Your rocker switch has a rocker switch.

  • @DCFusor
    @DCFusor Před 3 lety

    Did you ever get a PID onto your melter for freedom seed material? It really improved my setup.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      I haven't yet, but will be doing that in the future for sure.

  • @bh5097
    @bh5097 Před 3 lety +6

    Starlight by Nighthawkinlight you wont be disapointed.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Seen it and loved it! His videos are always a treat

  • @TheBackyardChemist
    @TheBackyardChemist Před 3 lety

    I would really recommend putting computer fans in, to ventillate the control compartment, even with the insulation that space will get awfully hot for the PID controller if you crank up the heat and keep it at max temp for hours. The oven is gonna run much hotter than originally and the new control circuit is much less heat resistant than the original.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Agreed bigtime. I literally just unpacked my two new cpu fans I'm going to use to keep it ventilated

  • @kleetus92
    @kleetus92 Před 3 lety

    One comment... if you haven't ran this yet, check the clearance of the glass door with the opening... with nearly doubling the operating temp, the glass may expand enough to interfere with the door... and may explode if it expands too much and has no place to go. Just be aware you may have flying 800F glass in your shop.
    Otherwise, nice build!

  • @colinv2415
    @colinv2415 Před 3 lety

    As a guy that made a DIY sous vide crock pot controller in a dollar store plastic tote, what you have done here is quality. I actually have an order or operations for connecting the thing up so as not to kill myself..

  • @Clipster15
    @Clipster15 Před 3 lety

    In forming your perchlorate from chlorate, if you decide to use the HCl method for destroying trace chlorates, be careful with what you might find on the web with regards to the process. I have seen it stated simply to adjust the ph to something like

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Truly excellent advice. Your comment prompted me to go buy some methylene blue and indigo carmine to make up test solutions.

  • @Palmit_
    @Palmit_ Před 3 lety

    When is the full test mr @ElementalMaker ?

  • @jasonvliet-odonataknifeworks

    Appreciate the video…I’m working on this project this weekend. Have you had any issues with the PID or SSR overheating? I won’t be going beyond 500F.

    • @ElementalMaker
      @ElementalMaker  Před 2 lety

      No issues yet! I've ran it for extended periods over 700. It was critical to add the 120vac computer fan to the electronics side, but with that it should be A okay. Just don't ever use it in your house, I wouldn't trust this sort of thing anywhere but my detached garage.

    • @ElementalMaker
      @ElementalMaker  Před 2 lety +1

      It looks like I didn't include the side fan I installed in the video, but I recommend putting in a 120vac computer fan to keep the electronics bay cooled. I used a 90x90mm 60cfm fan I found on Amazon for cheap and works great

  • @Dom-nt4gn
    @Dom-nt4gn Před 3 lety

    I want that toaster SO BAD

  • @NERF2YOU2
    @NERF2YOU2 Před 3 lety

    Hey I dont know if I missed anything, but will you be making more rocket motors soon? thanks

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +1

      Working on a rocket video right now actually! Should hopefully be done shortly

  • @jason0870
    @jason0870 Před 3 lety

    Hey line the inside with NightHawkinLights starbrite formula it's a pretty thin heat/fire resistant coating.

  • @procactus9109
    @procactus9109 Před 3 lety

    So I just thought of something... I'm thinking copper foil cladded on the inside could be a great thing. Copper reflects infrared very well, it doesn't even have to be shiny to work. I believe copper is used as a mirror for IR lasers. But I'm also thinking it could be too good of a mirror creating reflective hot spots but then the size of the heater elements might negate intense hot spots.

  • @bobedwards8896
    @bobedwards8896 Před 3 lety

    new video! happy to see you havnt turned into a potato, yet

  • @ryancollisson210
    @ryancollisson210 Před 3 lety

    Dude that into had me dead 😂😂😂😂😂😂😂😂😂

  • @gjdunga
    @gjdunga Před 3 lety

    Just wow. Layers of wow. Wow piled on wow with a sprinkling of powdered wow. Are you related to AVE? Or did he steal his shtick from you? I'm in love!!!

  • @Sam_888
    @Sam_888 Před 3 lety

    Took a shot of gum cutter. See you guys tomorrow

  • @tenkillcombo
    @tenkillcombo Před 3 lety +27

    Overclocking a Facebook special cheap chinese toaster with cheap chinese electronics...... What could possibly go wrong 😂🤣😂🤣🤪

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +5

      Sounds like a pretty bulletproof plan to me! 😁

    • @bdf2718
      @bdf2718 Před 3 lety +1

      Photonic Induction used to overclock things. A lot. That's how we know what can possibly go wrong.

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +1

      @@bdf2718 omg I forgot about his channel! What ever happened to him? His videos were nuts

    • @bdf2718
      @bdf2718 Před 3 lety +3

      @@ElementalMaker His wife divorced him, so he got depressed and stopped making videos. Eventually he recovered a little, made a few videos, and then fell for some woman in India. That made him depressed again, because she couldn't gain entry to marry him.
      I'm not sure what happened after that. One theory is he moved to India, married her, and is now so thoroughly pussy-whipped he's no longer allowed to make videos. :(

    • @ElementalMaker
      @ElementalMaker  Před 3 lety +2

      @@bdf2718 oh man what a dismal downfall. That's a real shame I enjoyed his content.

  • @WoLpH
    @WoLpH Před 3 lety

    If the thing has a heating element at the bottom, wouldn't it be better to put the heat blanket at the bottom of the oven too? Might be slightly harder to insultate but should help a bit I guess. Beyond a few longer legs/standoffs it shouldn't make it much harder.

  • @funbricknj
    @funbricknj Před 3 lety

    the only thing I be worry about is the glass door at what temperature will it fail at ????

    • @markshort9098
      @markshort9098 Před 3 lety

      It would be borosilicate glass (pirex) so is good for about 500c around 900f before it softens

  • @Sankeyite
    @Sankeyite Před 3 lety

    Enjoy your videos, I'm not on patron but see chat donations in others videos... maybe an option

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Great suggestion Tom, I will have to look into how other CZcamsrs do that 👍 thank you

  • @kinnikuzero
    @kinnikuzero Před 3 lety

    wtf I didn't get notified even with the bell activated

  • @SomeMorganSomewhere
    @SomeMorganSomewhere Před 3 lety

    .> looks furtively at the toaster oven on the shelf to my right (though I don't run it at super high temps).

  • @williamlivingstone4326

    I wonder how quickly you could make toast with Satan's oven? Lol. Hope you and the family are on the up and up buddy!

  • @stanjepson2054
    @stanjepson2054 Před 2 lety

    why are wanting 750 degrees?

  • @timng9104
    @timng9104 Před 3 lety

    make ybco superconductor pls

  • @ShimonKupferman
    @ShimonKupferman Před 3 lety

    1) A grounding conductor must be connected to any electrical device made of a conductive casing.
    2) not good that the power cord comes out of the bottom; Worth from the back wall.
    I'm also not sure this cable is made of two layers of coatings.

  • @MercAudio99
    @MercAudio99 Před 3 lety

    100 degrees more and you can market it as the 800 degrees mini pizza oven😂😂😂
    Incase they don't have it in your area, there's a custom pizza place called 800 degrees out in Los angeles

  • @MrSoarman
    @MrSoarman Před 3 lety

    Wow, wish you would have gone through the PID program, I bought a kiln with that controller in it, I ended up tossing it away and used a manual reo, that pid is NOT user friendly

  • @TechGorilla1987
    @TechGorilla1987 Před 3 lety +1

    It's about GATdamned time! I hope you're well, my friend!

  • @MrEric_API
    @MrEric_API Před 3 lety

    Satanite..... on now I know we dealing with an 1) Engineer 2) Petrochemical experience.

  • @glesus5491
    @glesus5491 Před 3 lety

    you kinda sound like Travis Willigham. you just need to play some DnD and be a voice actor :P

  • @nedshead5906
    @nedshead5906 Před 3 lety

    This week we turn a toaster oven into a metal project box so we can build a toaster oven

    • @ElementalMaker
      @ElementalMaker  Před 3 lety

      Let's put a toaster in a toaster to toast your toaster.

    • @jdecar1
      @jdecar1 Před 3 lety

      How much toast could a toaster toaster toast, if a toaster toaster could toast toast?

  • @lindboknifeandtool
    @lindboknifeandtool Před 2 měsíci

    I use PID to control my evenheat, and my dab rig allegedly.

  • @BensWorkshop
    @BensWorkshop Před 3 lety

    Nice work. All that lack of insulation in the original would make it horrifically inefficient.