How to replace tire for Ninebot MAX, tire replacement
Vložit
- čas přidán 24. 03. 2020
- Avoid damaging the rim, as it will leak, the air!
If your Ninebot Max tire leaks the air near the rim, use tubeles tire sealant.
Use only plastic tools.
HACK!
Use zip ties for mounting the tire back, also pay attention to the tire direction! ;))
Ninebot MAX PARTS:
shift.lt/en/34-Ninebot-MAX-parts
Air pump:
shift.lt/en/accessories/313-m...
You make it look so easy 😐 i been struggling for 2 days now
it is much easier to put on a tire that has been on the rim and stretched out already
I've been struggling for 2weeks🤣 torn between getting it to a shop or going to the gym to put this bitch on🤣
Did you manage to do it?
@@maincharacter2677 yeah, i ripped the tire in half, and still struggled a whole day because the puncture resistant glue on it melted and fused with the rim. Placed a solid tire to it, way easier to do if you boil it
once u got it right u can change the tire in 10 minutes, i need 3 days including a ton of tutorials, now its easy like drinking water.
A tip for anyone buying a scooter don’t buy one with numatic tyres you will regret it solid tyres only
But I heard pneumatic tires are more comfortable?
@@alexlee6859 Yes they are but they can be very difficult to change I have a background in both motorcycles and bike racing. I know how to change a tire and struggle with nine bot ties and at this stage only done front tire back will be more difficult to remove wheel currently trying a good re dose of tire slime possibly the best answer
the pneumatic tires feels so much smoother jus eat your wheaties mate muscle up
Also solid tyres shake the components and damage the scooter they also ratle and snap bolts
I am planning on mitigating these issues with better suspension, solid tires were the same price as pneumatic, only need to install them once and never look back
I dont have a vice grip or clamps... should I go buy clamps now?
Changing electric scooter tire is the same as changing a tracker trail tire, it is not easy 😐
😂😂😂😂😂 yea is not easy
its super easy once u got it right, its like drinking water
Will stickers pop these tires?
I have a question. Can the vavle be replaced? I have a bad flat where it seems the valave is busted every time I fill it up the vavle will stop at 21psi and start releasing the air. Thanks in advance!
Sure, you can find it on Aliexpress.
very nice
thanks to uload this one
Anyone know where to get the exact screw replacements for the bottom battery cover? A few have been damaged and after I get them off I won't be able to reuse them, so I need replacements. I was hoping I could get them from a hardware store.
Yes its regular screws, just go with an example screw and you will find them for a few cents ;)
The two black plastics to change the tires. Which manufacturer is it and where can I buy it? Do you have a link?? Thank you!!!
hello, we use this one you can find in Decathlon: www.decathlon.lt/lt_en/bike-tyre-lever-en-s300646.html
What size tires am i looking for. I know it's 10 inch but on the tire it says 60/70-6.5 is that the tire size I should be looking for?
Yes.
What is the name of those black plastic tools you used to take the tyres off with?
Tire levers
I have the same air pump. What is that attachment on the end you hooked up.
its just and extender, as the original pump valve is from aluminium so it wears out then using not for personal use :) so we added this as its strong metal: www.shift.lt/en/accessories/84-inflating-adapter.html
Fan, is this a vid for professionals only? I got excited with the knife and fork.
Freaking rubber alternator this is madness
i had a xiaomi m365 before i got so much punchers😩 i want to buy this model do u think it will be better for the punchers ?because the road condition is very bad in montenegro
Just now had my first puncture after 2500km, but I am riding only on paved roads
Ninebot max is a lot better option than m365. Xiaomi 90% of the times wears out from the inside, because of tube rubs itself into the tire. So jusp pumt it to 55psi on MAX or 65-70PSI on M365 and should be a lot more resistant.
sveiki,klausimas iškilo į šitą modelį nesideda kamera? nes mačiau i g30 dedasi,pas mane g30 II max,man isilyde gelis iš padangos,reikėtu pasikeisti
galima ir kamerą dėti, bet neverta, bekamerinės padangos geriau laiko :) atvežkit į shift bet kada darbo meto :)
A que lado de la rueda delantera va la arandela ?
What about replacing the tire valve-the part where it pumps air into the tire-can it be replaced without taking the tire out? Where can we get those tools that you used?
You do not need to remove tire to replave the valve. Tire levers we bought from Decathlon :)
yeah i accidentally snapped my valve out, im thinking easiest way is to take tyre off
Has anyone figured out how to just replace the valve? Do I need to take the tire out? How do I fit the new one in?
Can anyone explain the how he uses the cable ties? I've got a problem to get the tire back on the rim
Hello, just put them around the Tire, push the tire to become slim and push it to the rim as deep as possible (on the opposite direction than the valve is) so in that way you will get yours extra 5mm and it will be easy to put the tire on. So zip ties help to hold the tire in "slim" position and works as an additional hand :)
Do I really have to have this heavy presser? What if I'm running flat in the middle of nowhere. I need to have some easy kit with me at all times. What should such a kit include, and how to perform? Thanks!
we would recommend having 2pcs: www.decathlon.lt/lt_en/bike-tyre-lever-en-s300646.html
by using two of then at the same sports is easy to unmount the tire. Also zip ties is a must for easier installation the tire back :) also 2.5mm hex, 18mm regular took.
how would you have a spare tire on you riddin a ninebot in the middle of nowhere come on now
와 잘보고갑니다 덕분에 배우고 가요^^
My motor lost the black rubber around it is it important.
is the rear fender a little bit twisted to right or mine is damaged? 🧐
Should be straight :) if yours has a small crack so we would recommend buying a metal support: czcams.com/video/AVyLcG4uyHY/video.html
Hello friend, I have looked at your video, how to change the tire, my problem is that I buy a tire the same, I put it in its place and the air does not enter, try with the compressor and if the air entered, but 2 days later it went down again, you see that through the tongue The air comes out, by chance do you know if he uses any sealant or glue?
Hello, yes sometimes there are micro holes so the air leaks little by little. We use tubeless tire sealant the same as for bikes. It works great and fully solves the problem. We use this one: www.shift.lt/en/shop/352-ninebot-max-tire-sealant.html
but probably other brands works as well, so just go to local bicycle shop and ask for tubeless sealant ;) good luck!
Wonder if my local bike shop can do it. That looks like a PITA :)
Shit man, i just checked out replacement tires (no name brand), the mfrs cost over $50.
WTaF, I’m willing to bet a bike shop won’t charge that much. Even if they have to use rebranded tires that aren’t gel sealed
@@freedom_born i just copped a pair of solid tires for $50 CAD each, going through the tire removal process once is enough for me
@@kristophermoffatt6071
I actually ended up buying a solid tyre, but couldn't fit the bugger. I don't think it's too small, I just can't get the SOB on. So I just brought new tubes and some slime instead. Shitloads easier.
Tried replacing mine today. The self sealant was everywhere. What’s the best way to clean it? 5 hours later and the tire is in the wheel but I can’t seat it do to the sealant from the old tire.
true that gel is really messy :) soup, any old tshirt and then mounting the new one, dont forget to add soupy watter or tire changing paste, and pump up to 9BAR to sit the new tire in the place ;)
What sealent ? This doesn’t have any
What is the air compressor called how much is it I want to get one
It's a Xiaomi Mi Portable Electric Air Compressor it's about 30-50usd depends where you want to buy it
Hi,
I just want to know if how much air did you put in the tire? Is this automatically calculated by the xiaomi air pump? This is the exact video that I'm looking for to maintain my Ninebot Max.
Thank you!
i would recomend about 3.5bar :) in video I put 4.5bar to get good seal. On xiaomi pump you can set the value you want.
60psi
I change the tire already but the air is not getting in
How did you get the side panels off?
it was new motors without side pannels, you do not need to remove them then maounting the tire ;)
Hast du ein link für das Werkzeug was du benutzt würde es mir gerne kaufen
welches Werkzeug? :)
Does anyone know where I can get throttle & brake repairs in Los Angeles? Nine box max
same lol.
your own two hands
손으로 쪼물딱거려서 들어간다면 많이 늘어난 타이어라는거밖엔....그리고 샤오미 무선펌프로 비드면 안착은 쉽지않습니다.
Ehh if you make a link to a website perhaps it would be nice if the website was also available in English?
Does this tire fit to Xiaomi m365 PRO? and where to find them (tires only)?
No ;/
You should check with google with better researching before can do anything as heard few people doing with there ninebot g30 can be fitted some certain parts and you would be surprised
Still selfhealing tires?after d replacemnt?
yes, inside is not a liquid, it's gel.
Does this tire fit to Xiaomi m365? Did You check it?
it does not fit ;/
How you manage to pump till 9bar whit xiaomi pump
Nice
do the max and the max g30 have the same tire size? i have a max on order
it is the same model)
Vladymyr P thx Vlad!
same :))
Great video but wish he explained what he was doing
Is it okay to slime the wheels?
No only armadillos or ur seal will turn to gew blob
Hi thanks for your video,
Where did you buy the plastic piece for remove the wheel (don't want to use iron tools)
Thanks
Hello, thanks for the feedback. You should find them in Decathlon ;)) they are about 5eur each. I would recommend the use 2pcs of them :)
Thanks
I order the decahlon piece
You have an Idea how to change the valve ? Do you know the tool for change the valve on the motor ?
What is name of this plastic tools?
@@Shiftlt what is their name, the tool?
Did everything but when I tried to put air doesn’t fill up. So my question is do I need a air compressor for it to work? Or can I just fill up in a gas station?
Will a car air compressor work?
@@colombianeduardo yes strong compresor usually solves the problem
@@Shiftlt I had the same issue and managed to pump it with compressor but the wheel is wobbly because it isn't seated evenly on the rim. Have to take it out and put it back in and seat correctly :/
please help, what size of that wheels nut? i need id so badly
you need 18mm key ant the nut is M10
Good effort to change that tire but bad system of the company because there is not an easy plug where to disconnect cables from that tire.the way this guy got it you have to disconnect many things that at the end is not worth it for the costumer and mechanic. The engineers of these days are missing few things everywhere!
how can i get like your air compressor?
hello, if you are from EU you could order from our shop:
shift.lt/en/accessories/313-mobili-xiaomi-pompa.html
Where can I buy the kit to remove the rim?
Decathlon stores
Hello I have the same wheel flat I don’t know if send it to the company or do the whole process I see many video of the front wheel but this is the only one about the back one. Please help bro.
its not easy to replace the tyre.
Hello,
Where I can find the same tool for changing the tire?
Thanks
These are called "tire levers." Any bike store that sells handy bike tools will carry them.
we bought ours in Decathlon, best of all we tried.
Hii I’ve just put new tire on my back one but I’m struggling to pump up 🤔
sorry for late replay, you should lube it in all parts, soapy watter or tire montage gell, and sometimes pump it even up to 11bars so seat it in place.
but usualy its enough 6-8bars. :)
From where can I order tires for ninebot max? Is there any specific site on the internet for this?
I'd like to know as well.
amazon oem ninebot max tire
kiek oro reikia pusti i max30 padangas? gal kas pasakys?niekur nerandu info apie tai.
How do you get the air out of the tire to remove it i tried is there a special way
4 bar puskit ir gerai bus ;)
I tried changing my back tire today and could not get it on whatsoever… any tips/tricks/suggestions?
Same, this man fucking squished the tires on with his bare hands, wtf
How did you take the motor out
Remove the bottom plate, remove reflective stickers on the sides, so you can find screws, and disassemble so you could take it easy.
czcams.com/video/_r4dLPIryRs/video.html
Where do you get replacements for the g30 max's tires?
we ordering directly from china :)
My inner tube won’t come out how do I screw it out
there are no inner tubes in this scooters.
Heey i change the tire but when I try to fill it with air the air get out along the rim in 1 section. Any idea to fix it. It was a pain to get the old one off and the new one on?
Now we are using air compressor, also you should lube the tire and if its not sotting into the place so sometimes its necessary to pumpt it to 8-9bars to sit ir to the place
The hardest part, how did you get the cable disconnected?!
Its the easiest part, just unscrew the bottom plate of the scooter and disconnect the plug grom controller :)
Followed these steps but my tire will not bead not allowing it to pump up
If the old tire Is broken can i Just cut It?
yes, but the gell iside is really not cool to touch as its very sticky :D
Is the process removing the tyre much easier than the Xiaomi M365 Pro since it doesn't have the inner tube anymore?
Actually not, for me Xiaomi m365 Pro is a lot easier, but I changed 1000+ Xiaomi tires and only 1 Ninebot Max :)
@@Shiftlt Oh okay. Well I have tough luck on removing the M365 tyres plus I always bring my M365 Pro ver. to my local Mi service centre to service my M365 Pro tyre replacement and it costs quite a lot actually, $80NZD for the hard labour and without providing them tyres & tube = $120NZD service fee gosh!
Ohh @@gtone339 we charge 15e for the front and 10e for rear tire/tube replacement :) 80-120 sounds like a steal ;D
@@Shiftlt Sure is lol. Nice price where you guys located?
@@Shiftlt Jokes we are under lockdown here in NZ can't ask at this moment.
I replaced the tyre of my Ninebot today, but I could not pump up it.
The air is escaping because the inside of the tyres is not perfectly fitted and I have a manual pump.
With manual pump its hard, best is strong compressor. Also you could use belt to push tire to sides and then pump
@@TomasValaitisDr Thanks man, I gave up it. I put a solid tired, but It is so uncomfortable and broke the fender. Then I bought a inner tube, I will try it later
60/70 6.5 tires are such worst without having any brand names on the tires and you should watch james angelo tv on his video with segway ninebot g30 with blade gt parts and you would be surprised the way he built his into different and man he has bezt tuners ive ever heard
What do you call the tools?
Tire levers or which ones? :)
The yellow and black ones
How did you make the 5 gallons of tar inside the tire not make your job Messy where is the tar?
I don’t get it back. Seems to be impossible.
I needed 2 hours To get the tire off and now .... 😭
I feel your pain
next time try to lube it :)
It won’t sit properly!!!!!!!!!!
@@KNUCKLESoarevalo did you tried to lube it? and try to put more pressure or deliver it to the service center.
Shift lt impossible took it to many bike shops they tried the lighter fluid trick and almost burned down the shop and my wheel😔
Does anybody know I got a segway max scooter my back tire started gushing out some sort of black gew around the rim but after watching this video it doesn't look like there's any thing inside this tire what can it be help
It's tire sealant inside of the tire sorry mate you need to change your tire exactly same thing happened to me, search on AliExpress for it or go to website Scooterhelden and they got all parts there
How do I remove that black gew sealant from the rims? Please help it’s extremely stickt
I used GooGone and it worked really well
Doesnt work for me. Anyone got an idea?
which part does not work?
4.5 bar 🫢?
Then mounting the tire so you can pump up to 10bars, so the tire will poop up in place and then leave about 3.5-4.5 bars for riding. Its our recommendation.
@@Shiftlt oh wow, i always had 3.4, thanks.
@@Fa-id4nf 3.4 its also ok. We wiuld not recommend having less than 3, as its get easy to loose air on bumps. And with ~4 barts yiu tires will last longer, scooter will have better range, maybe loose a bit of comfort :)
Why not use metal?
The metal ones que scratch all the wheel
I don’t understand how the hell you are able to just snap it back on like that?!
As it was the same tire, so its easier, aftet putting 100+of them we could tell that it could be really hard to sit it to the place. Use tire lube and pump it to 10-11bars untill it sits to place and then reduce the presure to 3.5bars :)
I finally got the tire on the rim, and I needed two other guys actively helping me. It makes sense that you’re using an old tire because there’s no way one could just snap a brand new tire into place like that with bare hands, unless you’re just freakishly strong lol
Missing some crucial information
This video is full of it everything he did in this video i tried the tire doesn't even budge i tried everything it won't even inflate enough fome to remove
It's not easy to remove the tire, but it's clearly possible.
Is this an original CST tire? I wonder how you got it onto the rim without any tools. My spare tire is very stiff and I can't get it onto the rim.
Klotz it is impossible!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The max is trash now
Wait its all rubber
could do without all the loud noise !
This video is missing crucial commentary. It took me 5 hours, seriously brute strength and 2 ppl to replace my tire.
yes, its not that easy, in video real time it took me, with setting up video gear took 1.5hour, but after we changed 50+ of them so it takes about 20-30minutes :) but true that its pain in the ass for the first times ;D
After mounting the tire, it wouldn't inflate. I even tried using a starting fluid and fire to seat the bead and it still didn't work? Do you have any ideas I could try?
I dont belive you can squeeze orginal tire like that. Put them on is almost impossible
video is real and parts are original :) to put them on to the rim you can use zip ties help, also if the tire does not jump on rim then you pump them, you can use soup to easier sliding them to the place, also pumt to 8bar so they can jump into the place if the tire is new. ;)
@@Shiftlt i changed tire, but from one side it get squeze and it's more in rim, i can't pump because air goes away.
@@hubertus323f you should use a strong compressor in your case, or put the belt around the tire squize it, and then pump it.
@@Shiftlt I had the same issue and managed to pump it with compressor but the wheel is wobbly because it isn't seated evenly on the rim. Have to take it out and put it back in and seat correctly :/
Just mute the music
Малко течен сапун и ще е по лесно
да, или паста за монтаж на гуми.
Bullshit there’s no way there that easy to change 😂😂
Dude that’s what I am saying, this has to be bullshit. It took me and TWO other guys actively working to get the fucker back on the rim and the bead still isn’t seated correctly
Hands down the worse wheel design I have ever worked on for a escooter, fitting the new tyre is nothing like shown. Taking it off was even worse.
true, its hard, even to take it off :) but it has great sealing then addind just a bit of sealant liquid, for our rent scooters it holds air perfect even after 6 months! So its really hard to work with this tires, but from longetivity they are the best from our point of view :)
@@Shiftlt i think they mean you are able to ewasily put the tire back on with just your hands and two tyre tools ... when in reality that is basically impossible to everyone that has ever tried!
Thats one flimsy tire, mounting it by hand.......
What a nightmare
I really can not understand how you can install the tire so easily.... I tried 30 minutes and gave up...
If it does not poop up on the rim so try to lubricate it better and pump to 10bar and leave untill it poops up in place. If its hard to put it in rim, so use zipties to help you hold tire squeezed.
@@TomasValaitisDr Thanks a lot. I installed the two tires with zipties. However, some parts of them didn't go to the correct place and leaky. I am still trying how to pump to 10bar and leave them to the correct site fully.
@@dingdangmao2023 and then it will poop up in place, so its recomended to add some tureless tire sealant which is used for tubeless bicycles, its helps to seal micro gaps between the tire and rim, as they're apears sometimes and leaks air very slowly.
Hydraulics.😆
Save time and just cut the old tire off
Thx for the good idea
@@FJBTrump2024FSleepyJoe WARNING: the knife will get messy from the black gooey tire stuff inside!
@@SupergiantgeckosLLC black gooey tyre stuff?
@@FJBTrump2024FSleepyJoe yeah the tyres are “self healing” and have very sticky layer of tire plugging goo inside
FAKE VIDEO. It is imposible to make by hand. They should have cut a strip of rubber to fit so easily.
video is real and parts are original :) to put them on to the rim you can use zip ties help, also if the tire does not jump un rim then you pump them back you cam use soup to easier sliding them to the place, also pumt to 8-9bar, they wont explode.
Shitty advice. Using iron lever won't damage the rim, maybe scratch it a bit. Don't give yourself unnecessary stress by using the filmsy plastic level. Go ahead and use a proper long metal lever. It will make the job much more easier.
scratch a bit is not an option then you repair client's scooters. Best tool would be metal levers covered by plastic, but we didn't found them to buy. Also using two black plastics does the job. It was the first time i changed the G30 MAX tire and took in on camera, now i do it alot easier ;)
No sh!t you need an Alan key!!!
but Hahaha wtf first 30 seconds dont use anything metal then first thing used is Metal 🤣🤣🤣
Next time just be like metal is used but don't be barbaric and use metal in bits it can damage
you didn't got the point, with the forks etc. It's not recommended to use metal parts that can scratch the rim, so the ail will leak if there are some scratches.
Why did you edit out your video at 2:26. Tire doesn't install that easily you liar
i was doing it in bad way, then i was filming this video - i done it for the first time, so i cut the parts where i was doing it wrong :) but its true that its really hard to replace the tires for ninebot max :)
Changing the tire is not as that easy… Garbage