What all the aggravating days are ultimately about...getting the things/experiences that bring us joy in life! Thanks for sharing a part of your joy with us!
Such a beautiful bike! Great looking build! I just picked up the last remaining ‘21 model on the lot here in Tulsa where I’m at. Got a really good deal (for a new Harley!) it’s my second bike. Traded in my iron 883 for it. I’m a HVAC/R professional myself. Hoping for a busy summer! Get all those goodies my bike is demanding I get for her. I absolutely love this bike!!!
Last bike I owned was a 1981 Yamaha Seca 750cc with shaft draft (believe it was the 1st shaft drive?) -- dusted a Honda 6 cyl in a drag race but the bike was unstable above 130mph -- PEOPLE DON'T SEE YOU AND YOU HAVE TO BE TOTALLY DEFENSIVE -- IN FACT, I WAS RUN OFF THE ROAD A FEW TIMES BY DRIVERS NOT SEEING ME.
Did you have to end up putting cables on those bars or were there enough slack to squeeze the 13s on? I’m not sure what the stock risers and bar set up was
You mentioned that this a "low budget version" of the Coast Glide,,,don't think so,,,it cost a little less,, but it looks just as AWESOME!!!! I have a 2020 Sport Glide that looks very similar,,,Enjoy,,,
@@NorCal-refrigeration That's some good stuff. I came off a street glide and this was a practical bike for since my accident. I am hoping to start doing mods this fall.
Wow so nice. Again welcome to the dark side Dave. Crash bar prob go idea cheap ins I’ve been riding since 92. And have had a couple bikes down even at slow speed or stopped. It protect a lot you and the bike. Just my opinion Dave. Ride on 😃👍🏼🇺🇸🥃🥃
Awesome looking bike I have one myself I put a Harley quarter faring on it I wanted to put that style but they didn’t have the brackets yet might do it next year
Your bike is killer. I just bought a new Lowrider S based off of your bike from Matt Laidlaws video on it and plan on doing it up similar to yours minus the fairing. I love the fairing but it’s a little over my budget at the moment but it will be a future addition for sure. I am putting the same lucky daves bars on it as well. I was wondering if you had a list of part numbers they used for the addition of the bars? I.E- clutch cable, brake line, switch wire extensions, TBW extension, Etc. Once again love your bike, you did up it nice!
Congrats on the new bike. I don’t have any part numbers for those parts. I just had laidlaws do there thing, you would have to contact them for the part numbers. This bike handles so much better than my victory highball it’s night and day.
Dave, would you do a step by step video on changing the defrost times and duration on a DIXELL DIGITAL CONTROLLER WITH DEFROST AND FANS MANAGEMENT XR06CX . Ran into defrost problems and can't get it to defrost enough. Freezer freezing up every week. Need your expertise. thanks
Thanks for answering my Vangina question -- now let's discuss how you tell the difference between a leaking solenoid valve (maybe getting a doctor's stethoscope to possibly hear the leak???) and compressor valves leaking after pumpdown -- Dude -- this is important unless I'm missing something.
@@NorCal-refrigeration Did you notice a better change in height ? or lean ? I have the Heritage shock that I'm getting ready to install but wanna know if it will sit the same compared to the stock FXLRS shock before I go buying the BungKing Shock Extension
How tall are you that you needed the seat pushed back 2 inches. Or is it a comfortability thing. And if it is comfortability thing how did you know if you bought it on line. Sorry for all the questions im just totally interested.
Oh ok. Ive been binging your. Channel through the quarantine. Cant wait for more bike videos and music. You have me listening to prophets of rage. Kinda hit home at the present.✊🏽
Why do you prefer an old & loose Vangina when a young & tight Vangina would be more pleasurable to drive -- makes no sense. That is a Badazz Bike -- always liked the low riders.
I already know motorcycles and parts are expensive no matter what brand great deal on the exhaust by the way but $700 for the mount kit?! You gotta be fucking kidding me that fairing could be all I want for Christmas and I could have a million bucks in my bank account fuck that
I bought a corbin seat for my lowrider. Man its so uncomfortable. I feel every pebble on the road. The craftsmanship is beautiful but comfort sucks balls.
The prices for the parts on harley are just insane..799 for a fairing and it does not even come with mounting brackets 😂🤣 600 dollars for the paint??? I guess you guys use diamond powder in the paint🤦🏻♂️.. you crazy to pay even 500dollar for fairing with brackets and painted
What all the aggravating days are ultimately about...getting the things/experiences that bring us joy in life! Thanks for sharing a part of your joy with us!
Dang Super Dave that bike sounds angry ...What a rumble ... Nice ride ... Enjoy ...
Awesome bike my friend. Enjoy the hell out of it. I think you made tasteful mods. 👍🏻👍🏻 great riding scenery too.
Thanks for all your help! ❤️
Such a beautiful bike! Great looking build! I just picked up the last remaining ‘21 model on the lot here in Tulsa where I’m at. Got a really good deal (for a new Harley!) it’s my second bike. Traded in my iron 883 for it. I’m a HVAC/R professional myself. Hoping for a busy summer! Get all those goodies my bike is demanding I get for her. I absolutely love this bike!!!
Thanks man. New episodes of hack and Moe Fridays 5 pm pacific.
Glad you are enjoying the new ride. Probably like a big kid with a new toy. Have fun.
I was at Laidlaws when you were picking this up. I'm glad to get a closer look. It's a nice ride.
Thanks Angel
The joy and beauty you get from riding is priceless Might as well do it on a Badass Motorcycle .
That is one kick ass ride, you can’t beat that view either 🏆
Nice bike brother! Ride safe.
Live to Ride for that that area. Both the Coastline and Santa Cruz! Love the setup too.
Ride safe.
Did you relocate the front turn signals to the bottom of the fairing. Was that easy? Any additional wiring needed?
I have a 2003 lowrider and it's been a great bike, classic style, prolly gonna trade it in for a street glide soon, safe riding brother.
🤘⚡️🤘
Last bike I owned was a 1981 Yamaha Seca 750cc with shaft draft (believe it was the 1st shaft drive?) -- dusted a Honda 6 cyl in a drag race but the bike was unstable above 130mph -- PEOPLE DON'T SEE YOU AND YOU HAVE TO BE TOTALLY DEFENSIVE -- IN FACT, I WAS RUN OFF THE ROAD A FEW TIMES BY DRIVERS NOT SEEING ME.
Did you have to end up putting cables on those bars or were there enough slack to squeeze the 13s on? I’m not sure what the stock risers and bar set up was
Yes. I had it done at laidlaws I don’t know the part numbers. The wiring is internal also. Super clean set up
You mentioned that this a "low budget version" of the Coast Glide,,,don't think so,,,it cost a little less,, but it looks just as AWESOME!!!! I have a 2020 Sport Glide that looks very similar,,,Enjoy,,,
Thank you G will do
Absolutely gorgeous. I may do the same to mine. I pick my LRS up on Saturday.
Congrats 🎉🍾. Great bike choice
Beautiful Bike! I am looking at a FXLRS soon.
its been great! I installed the heritage rear shock, it handles great!
@@NorCal-refrigeration I just picked up the FXLRS on Friday and it is amazing!
@@noreturnhere968 congratulations 🎉 enjoy that bike. The range is over 200 miles on a tank of gas ⛽️ how nice is that?
@@NorCal-refrigeration That's some good stuff. I came off a street glide and this was a practical bike for since my accident. I am hoping to start doing mods this fall.
Awesome bike Dave I'm running a 2008 road king ex police officer bike would all the tricked out pistons in Cam in it
Wow so nice. Again welcome to the dark side Dave. Crash bar prob go idea cheap ins I’ve been riding since 92. And have had a couple bikes down even at slow speed or stopped. It protect a lot you and the bike. Just my opinion Dave. Ride on 😃👍🏼🇺🇸🥃🥃
I have it just need to install it.
Looks like the one Matt Laidlaw built. Im sure those new Softail frames rides good but it always looks like they are missing the rear shocks
It’s the bike from laidlaws. 🤘⚡️🤘
Nice 👍🏼
Awesome looking bike I have one myself I put a Harley quarter faring on it I wanted to put that style but they didn’t have the brackets yet might do it next year
These are awesome bikes. 🤘⚡️🤘
Looking Cool as you are Living the Dream 👍😎🇺🇸
Your bike is killer. I just bought a new Lowrider S based off of your bike from Matt Laidlaws video on it and plan on doing it up similar to yours minus the fairing. I love the fairing but it’s a little over my budget at the moment but it will be a future addition for sure. I am putting the same lucky daves bars on it as well. I was wondering if you had a list of part numbers they used for the addition of the bars? I.E- clutch cable, brake line, switch wire extensions, TBW extension, Etc. Once again love your bike, you did up it nice!
Congrats on the new bike. I don’t have any part numbers for those parts. I just had laidlaws do there thing, you would have to contact them for the part numbers. This bike handles so much better than my victory highball it’s night and day.
Thats a purdy scoot, Dave.
Looks very cool my dude! I just bought the very same bike & looking to trick her out. Thanks for the video, like what you done with it.
Enjoy that bike!!!!
Do you have to use a longer cable kit for the bars?
Omg is this the bike that Matt Laidlaw showcased on his channel? Congrats on the sweet ride!!
It is. Follow my channel for more vids of this bike.
I think I fabricate the foot pegs. I’m gonna make them and try them out. I also want to make a sissy bar for mine.
Dave, would you do a step by step video on changing the defrost times and duration on a DIXELL DIGITAL CONTROLLER WITH DEFROST AND
FANS MANAGEMENT
XR06CX . Ran into defrost problems and can't get it to defrost enough. Freezer freezing up every week. Need your expertise. thanks
Check and raise the termination temp up. Check the evap prob those are the 2 most common problems I find.
That's one badass bike they're NorCal congrats and enjoy.
Thanks
How tall is the bar n it looks like LD 13 with pull back
Thanks for answering my Vangina question -- now let's discuss how you tell the difference between a leaking solenoid valve (maybe getting a doctor's stethoscope to possibly hear the leak???) and compressor valves leaking after pumpdown -- Dude -- this is important unless I'm missing something.
Did you add the BungKing Shock extension to the Heritage shock ? Or is that just how it sits with nothing done to the Heritage shock ?
Just the heritage shock.
@@NorCal-refrigeration Did you notice a better change in height ? or lean ? I have the Heritage shock that I'm getting ready to install but wanna know if it will sit the same compared to the stock FXLRS shock before I go buying the BungKing Shock Extension
@@sheldonsaenz8731 it will be higher than stock and the ride is better and lean is better
@@NorCal-refrigeration Thanks for the knowledge and reply !
@@sheldonsaenz8731 my pleasure
How tall are you that you needed the seat pushed back 2 inches. Or is it a comfortability thing. And if it is comfortability thing how did you know if you bought it on line. Sorry for all the questions im just totally interested.
I’m 6’1” I checked the bike out locally and new. The ergos are perfect for me as set up. Can ride all day.
Oh ok. Ive been binging your. Channel through the quarantine. Cant wait for more bike videos and music. You have me listening to prophets of rage. Kinda hit home at the present.✊🏽
Sherwin Alvarez oh ya!!!!!
Did you pick that one up at Laidlaws? I swear they featured a bike identical to that.
Yep that’s my bike. Subscribe and follow the journey I mostly do refrigeration videos, but have bike videos in to mix it up. Ride videos too.
She’s a beaut.
What size handlebars you got 11,13,15?
Nvm you went over it thanks!
Question: what length clutch and brake lines did you use? I’m doing 13” LD pullback bars and hope you can spread the knowledge.
I honestly don’t know but I can find out. I had my bike built out.
Nor-Cal Refrigeration & H.V.A.C please lemme know if you can. Dealers around here have no clue.
Dominic Dimartini gotcha. I’m on IG @rasta1kikker
Nice! I Finally got to ride mine today after a swamped 2 weeks. Looks and sounds great, Did you trade in your other bike?
I did.
did you change longer wires for the new handlebar?
Yes
I love this bike man! 🐺🤘
Did you need new wires switching handlebars and if you did what length?
You do I’ll have to check on the length
Badass bike man!
Want this fairing, but Russ doesn't deliver in Italy, how can i do?
Contact laidlaws Harley-Davidson and see if they can ship it to you
Nor-Cal Refrigeration & H.V.A.C thx bro! I’ll contact him soon! Thx!
Nice bike 🏍!!!!! What camera are you using to record ?
iPhone 8
Is there a longer mono shock? The fender looks higher than stock?
I have a fox shock 13.5 you can get 12.5 13 13.5.
So the fox 13.5 mono shock you have, that is higher than stock right? I’m not sure what the stock mono shock dimension is?
@@Turtle665 yes it’s a lot taller
@@NorCal-refrigeration awsome thank u
Looks good🔥
Bad ass--looks great
Why do you prefer an old & loose Vangina when a young & tight Vangina would be more pleasurable to drive -- makes no sense. That is a Badazz Bike -- always liked the low riders.
Almost motocross pegs bro nice
Yep
How much was it to extend your cables?
Great ? Somewhere around 200$
Bikes clean bro
Thanks MiG
Did you put the Heritage shock on this?
If so , is it worth it? Big difference?
Yes. The ride is great and you get more clearance.
@@NorCal-refrigeration thank you. I will have one out on mine before I bring it home.
I wanted to get the el Diablo but they will not ship to California. How did you get around that
Any family or friends out of state?
Unfortunately no. Congrats on that sweet ride. I have a 2019 lower rider I knew I should have waited, but customizing it and lowly
Ride safe
Andres Saavedra the S&S 2 into 1 is 50 state legal check it out.
Thanks I will
Looks good
I truly think fairing should costs way more than a bracket itself... lol.
Agreed
what license plate mount is that?
Drag specialties
Nice smooth
I already know motorcycles and parts are expensive no matter what brand great deal on the exhaust by the way but $700 for the mount kit?! You gotta be fucking kidding me that fairing could be all I want for Christmas and I could have a million bucks in my bank account fuck that
Looks like Dark Helmet from Spaceballs
It has the Swartz!!!!!
Absolutely beautiful, great bye.
Are you using 13 inch high bars and what are the cable swaps you used... Appreciate the info.
Yes on 13” lucky Dave’s bars. The cables I don’t have the part #’s, but if you contact laidlaws HD in so cal I’m sure they would help you out.
What size bars ?
13” lucky Dave’s.
Have you seen the fxr division, saddle bags? Let me know what you think.
Nor-Cal Refrigeration & H.V.A.C not a big fan of those.
Nice
I bought a corbin seat for my lowrider. Man its so uncomfortable. I feel every pebble on the road. The craftsmanship is beautiful but comfort sucks balls.
Mines super comfortable ride all day.
Nice, let's see some camping on it
😻
🤟
The prices for the parts on harley are just insane..799 for a fairing and it does not even come with mounting brackets 😂🤣 600 dollars for the paint??? I guess you guys use diamond powder in the paint🤦🏻♂️.. you crazy to pay even 500dollar for fairing with brackets and painted
👍
nice👍
Noice!
Thanks Tom
You ruined the front ! I don't like it
That’s fine. I love it.
I bought that exhaust and they wouldn't ship it to my house. It's not CARB compliant. Ha, ha, ha
Nice
👍👍👍👍👍
🤘🤘