I uave been wanting to work with ABS for 30 years! And this was one of the Need to Know, things! Thanks for making this video.... I gotta go order some materials!
Great video! This will come in handy after my local garage has been working on my car (there is a lot of plastic clips on the panels and they seem to break them off every time they work on my car.
www.amazon.com/Weld-Acrylic-Plastic-Cement-Applicator/dp/B0149IG548/ref=sr_1_3?crid=1UKO8KOOY84L4&dchild=1&keywords=acrylic+glue&qid=1624239130&sprefix=acrylic+g%2Caps%2C204&sr=8-3 same stuff thanks for watching
@@peterrolex2349 This is what I use not sure the mix propiaterie I'm sure follow instructions and you will be fine. And thank you for watching. And the bond is as strong as the as the material used I have been told
www.ebay.com/itm/plastic-acrylic-plexiglass-cement-glue-WELDON-3-4-oz-can-w-bottle-3B/360416631430?hash=item53ea815a86:g:Z-YAAOSwYGFUwlHG:rk:1:pf:0 Thank you for watching
@@KevinTodd hello again. Just wanted to report back and say that styrene bonds beautifully to cast acrylic! I used Weld-On 4 and it's fused the pieces into one, rock hard.
I'm not sure about that it would have to be tried first I don't see no reason why it wouldn't but I'm not sure what the strength would be so I'm afraid to say either way but thank you very much for watching
this is the link www.ebay.com/itm/3-PACK-Plastic-Acrylic-Adhesive-Applicator-2-oz-Bottle-w-22-Gauge-Metal-Needle/161305055478?hash=item258e87d0f6:g:E~MAAOxyCTtTcjaC
I uave been wanting to work with ABS for 30 years! And this was one of the Need to Know, things! Thanks for making this video.... I gotta go order some materials!
Great video! This will come in handy after my local garage has been working on my car (there is a lot of plastic clips on the panels and they seem to break them off every time they work on my car.
Thank you and thank you for watching
Really helpful video! Ty! Could you give a recommendation for gluing two piece fishing lures made of polycarbonate together? Greatly appreciated.
www.amazon.com/Weld-Acrylic-Plastic-Cement-Applicator/dp/B0149IG548/ref=sr_1_3?crid=1UKO8KOOY84L4&dchild=1&keywords=acrylic+glue&qid=1624239130&sprefix=acrylic+g%2Caps%2C204&sr=8-3
same stuff thanks for watching
@@KevinTodd ty for the help and quick reply! 😊
cool, acetone probably achieves similar results? found this while researching ABS PC welds.
thank you for watching and yes it probably would
Does Dichloromethane ( Methylene Chloride ) produce a stronger bond a) ABS. to ABS and b) Polycarb to Polycarb?
Got 2 jobs to do :-/
@@peterrolex2349 This is what I use not sure the mix propiaterie I'm sure follow instructions and you will be fine. And thank you for watching. And the bond is as strong as the as the material used I have been told
What is the name of the solvent used? Where can I buy it? Thanks
www.ebay.com/itm/plastic-acrylic-plexiglass-cement-glue-WELDON-3-4-oz-can-w-bottle-3B/360416631430?hash=item53ea815a86:g:Z-YAAOSwYGFUwlHG:rk:1:pf:0
Thank you for watching
👍
Thank you. Are you able to use this solvent to merge acrylic to styrene or only one type of plastic to another?
Not sure..... the process is the same I see no reason why it wouldn't......a little test would tell...thank you for watching
@@KevinTodd thanks for the reply! I will give it a go!
@@KevinTodd hello again. Just wanted to report back and say that styrene bonds beautifully to cast acrylic! I used Weld-On 4 and it's fused the pieces into one, rock hard.
@@gracebyseven NICE
Will that solvent weld product bond pvc cap to a Polycarbonate tube?
I'm not sure about that it would have to be tried first I don't see no reason why it wouldn't but I'm not sure what the strength would be so I'm afraid to say either way but thank you very much for watching
Will that work with dissimilar plastics like ABS to polycarbonate ?
the process is the same for both just test small test sample allow 24 hours for full cure to see if it bonds properly thank you for watching.
@@KevinTodd Thank you
What is the syringe container made of that it remains unaffected? Where can one be purchased?
this is the link
www.ebay.com/itm/3-PACK-Plastic-Acrylic-Adhesive-Applicator-2-oz-Bottle-w-22-Gauge-Metal-Needle/161305055478?hash=item258e87d0f6:g:E~MAAOxyCTtTcjaC
And thank you for watching.
Why didn't the other guy, film you doing this? Just wondering.
Old school he doesn't do camera work
Basically? Basically? Oh basically? BASICALLY
Methilyn Chloride... Like M.E.K. ? Methil Ethil Ketone. (If spelled correctly? Ha ha)
I have only used methylene chloride in this process and it's nasty stuff so take precautions here is a video of me using it again.
czcams.com/video/Ns53C0jFpBE/video.html
Mount your camera in a fixed position, then work in the area covered by the camera! Your video is one of worst I have ever seen!
I was back in the day when I was still learning happy Easter thank you for watching