Hey Dario! Thanks for the instructions! I found on my V2, that I needed the medium size black rubber spacers, not the large ones. I tried to make the large ones work for about 30mins but I couldn’t get them on. The medium ones slid right in and tightened up easily.
Hi Dario, very nice video as usual, lots of energy; would have been interesting to know the exact weight difference of the old vs new bar end (measured with something like a kitchen scale); keep up the good work!
Thanks for walking through this install! No doubt, those things look great. But, I'm curious...bar ends are made to be super heavy to help minimize vibration on the bars. With the lighter bar ends, have you noticed more buzzzzzzz in the bars while you're riding?
Keith Spieldenner thanks for the comment... I’ve only rode twice since the install and I have not noticed any difference but others have expressed your same point, so I will be sure to pay extra attention to it as I continue to ride.... if it’s something serious I will put it in a review
But there is a reason why the original are so heavy... Vibration of the twin engine... How is the vibration now on the bars? Thx dude, keep up the work!
@@heydario Ok thanks for the fast reply... If ordered the Rizoma mirror and brake protector, but also ordered the adapters for those 2... Normally they deliver my V2 in January/february... Can't wait! For me its gonna be more for track use. Keep up you work dude, greetings from Belgium!
How difficult was it getting into the bar? I used the largest black rubber piece and it won’t go into the bar.. did you edit how you hammering it in? 😂
@@lfclsdlfclsd33 that funny you say that, I’m looking at carbon just don’t have a full picture of what I want to do, because I think I would have to paint it, because that black plastic piece would stick out
@@heydario depends how much you wanna spend also ? In the UK their are a lot of websites that cater for v2 no doubt in the US it’s the same ? If you feel you have to paint the plastic bit maybe dip it or wrap it in carbon effect 🤷🏽♂️
@@lfclsdlfclsd33 yea that’s what I’m thinking of... now I’m looking up shops that do good work with it... gotta see the end in the beginning with regards to this part
Hey Dario! Thanks for the instructions! I found on my V2, that I needed the medium size black rubber spacers, not the large ones. I tried to make the large ones work for about 30mins but I couldn’t get them on. The medium ones slid right in and tightened up easily.
The new bar ends look good. My stock bar ends were torqued super tight from the factory. I was surprised how heavy those little things are.
Yea me too!
Cool install man the v2 is lookin good
Dude_Mungus much appreciated.... I’m tryna get on your level
@@heydario man you there !!!!! Love your v2
Dude_Mungus 💪🏾😎🤘🏾
Oh wow, I'm surprised you were able to use a 12mm hex socket. The proper socket is an M14 triple square socket. Glad you didn't strip it!
Jason Lopez true... I bought a M12 ... and a 12mm hex only to find out the 12 was way too small... but the 12mm fit well, so I went with it 💪🏾😎🤘🏾
Yeah the 12mm hex worked on my 1199
I don’t know anything about motorcycles but I love watching your videos
Thanks for watching!!
It bothers me that the red looks different from the "ducati red".
🍿 *I am just waiting patiently for the new mirror block off indicators* lol
ridebyben 😂😂😂.... as soon as futurismoto sends em
Great energy and content as always. Great stuff!
I am here to support Dario
Gud stuff bro 👌 💪
My man Dario...another helpful video... dude you have every tool known to man lol
🤣🤣🤣
Fighting with the bugs lol
mr2scroll 🤣🤣🤣
Hi Dario, very nice video as usual, lots of energy; would have been interesting to know the exact weight difference of the old vs new bar end (measured with something like a kitchen scale); keep up the good work!
Deathking66623 yea I thought of that while filming but In the future I will break out some scales
Thanks for walking through this install! No doubt, those things look great. But, I'm curious...bar ends are made to be super heavy to help minimize vibration on the bars. With the lighter bar ends, have you noticed more buzzzzzzz in the bars while you're riding?
Keith Spieldenner thanks for the comment... I’ve only rode twice since the install and I have not noticed any difference but others have expressed your same point, so I will be sure to pay extra attention to it as I continue to ride.... if it’s something serious I will put it in a review
Awesome vid as always. Planning to install a brake lever guard on my V2. Is there a torque spec after installing it in?
good job as always! Maybe you should have slapped on some new grips while you were replacing bar ends. :)
ethan van orton lol, I should have!... now j will have to go through the trouble of removing them 🤕 later
But there is a reason why the original are so heavy... Vibration of the twin engine... How is the vibration now on the bars? Thx dude, keep up the work!
No difference detected
@@heydario Ok thanks for the fast reply... If ordered the Rizoma mirror and brake protector, but also ordered the adapters for those 2... Normally they deliver my V2 in January/february... Can't wait! For me its gonna be more for track use. Keep up you work dude, greetings from Belgium!
@@thr4sh6r thanks bro! Creating as we speak! You will love it!
Yes my brother new videoooooooooooooo
Bro my bar ends are not fucking loosening up
You tried WD40?
@@heydario you’re the man. Worked like a charm, you should see how much locktight they put on this thing
@@Omenxiiii 😂😂 yeah I figured they drenched it
Dope V2 and barends I just received mine for the 959. These should fit the 959 as well?
Thumbs up to you man interesting good job catch you later
How difficult was it getting into the bar? I used the largest black rubber piece and it won’t go into the bar.. did you edit how you hammering it in? 😂
Grease bro…. Grease
😂😂😂
Does that mod create more vibration felt through the bars ? 👍🏽
Someone asked me this before and my honest answer is it feels exactly the same.... either that or it’s just me
@@heydario lovely bike glad your modding it ! Carbon fibre parts next please 🤤
@@lfclsdlfclsd33 that funny you say that, I’m looking at carbon just don’t have a full picture of what I want to do, because I think I would have to paint it, because that black plastic piece would stick out
@@heydario depends how much you wanna spend also ? In the UK their are a lot of websites that cater for v2 no doubt in the US it’s the same ? If you feel you have to paint the plastic bit maybe dip it or wrap it in carbon effect 🤷🏽♂️
@@lfclsdlfclsd33 yea that’s what I’m thinking of... now I’m looking up shops that do good work with it... gotta see the end in the beginning with regards to this part