Just a quick little how to video for those who may not know. Fairly simple and straight forward job to do, but just be wary of the small changed throughout the years.
Quick Tip: Remove the fill plug first just to make sure it will loosen and your not stuck with no fluids. But it will also let it drain smooth and not chug. Helpful video though, I was seeing how you got that diff drain bolt open.
I have an 08 z06, removing the snap ring on the cooling line/drain plug I had trouble reinstalling the snap ring. I figured out you install the snap ring first and the just push the hose end back in. At first I installed the line and then the snap ring. No way it would go.
I have a set of oem gunmetal gray and and a set of oem painted silver wheels for my c6 torch red 2011 corvette. They both look good but the silver really pops and looks classier. The gunmetal looks more street racer "wicked". Depends on the vibe you resonate with. I prefer the silver.
I have a 2009 ZO6 and on that year there are grease zerks on the rear inner tow links and when you have the car in the air is a good time to grease them,on some years they are sealed
Quick Tip: Remove the fill plug first just to make sure it will loosen and your not stuck with no fluids. But it will also let it drain smooth and not chug. Helpful video though, I was seeing how you got that diff drain bolt open.
Thanks for the upload learning alot today from you bud keep them coming !
I have an 08 z06, removing the snap ring on the cooling line/drain plug I had trouble reinstalling the snap ring. I figured out you install the snap ring first and the just push the hose end back in. At first I installed the line and then the snap ring. No way it would go.
I have a set of oem gunmetal gray and and a set of oem painted silver wheels for my c6 torch red 2011 corvette. They both look good but the silver really pops and looks classier. The gunmetal looks more street racer "wicked". Depends on the vibe you resonate with. I prefer the silver.
I have a 2009 ZO6 and on that year there are grease zerks on the rear inner tow links and when you have the car in the air is a good time to grease them,on some years they are sealed
We need to see how you get these bolts off. Chris Fix always shows that part.
Will do next time
A t55 bit is not a specialty tool..
Do you know if it’s the same way for the c6 grandsport?
Should be very similar.
Can I use this same set up from a c6 z06 with the T56 ?
I believe so
So you don't know the torque spec but it's torqued to spec....k
When should i change these fluids ?
Sooner than later
Manufacturers recommendations
I wonder if the Zr1 has tr6060
it does
@@daniel1997gsx I’m on the same boat about to change the oils aren’t we friends on FB ? Awdmonster on IG
@@frankgonzalez9302 yeah we are lol
Bronze wheels on red!
Silver wheels 😍
Is that one hot guy gonna be in this video?
No, we don’t talk anymore.
@@daniel1997gsx I'm unsubscribing.
Grey is way better