Thanks for your video. Glad you showed close ups of the expansion caps before and after install. They look to have a step on them on the outer edge and when I installed mine, I wasn't sure if they were properly seated. Basically, when installed, you will have a grove visible which makes them look not completely flush. Maybe it is a step designed in to be able to install something to pry them out.
Yup! It’s a kit so everything comes in one package from fcp! And I haven’t cleaned it at all, I would probably just replace it since throttle bodies aren’t too pricey! Good question
Helps Desperately Needed….I Changed My Cam Plug On My C300…Once The Engine Builds Temperature The Pressure Pushes The Cam Plug Out Causing A Leak.What Should I Do?…Do They Make A Sealant Or Something I Can Put On It To Stop The Leak?
@@UrielArtsGarage just had the job done today. Btw, we are members of the same group in FB. You once said that our cars look identical. But right now I can't remeber which W204 group is that haha.
Thanks for the video i have problem with breathing valve the last one you replaced the problem is that the middle diaphragm doesn’t fit into the oil pan pipe and it appears as impending tear how did you fit this part ?
are you referring to the crankcase oil separator? Here's a full kit from fcp euro that may help you visualize. www.fcpeuro.com/products/mercedes-crankcase-breather-repair-kit-oem-515810
Thank you for your videos Uriel, they are entertaining, new sub here! greetings
Thanks for the sub!
Thanks for your video. Glad you showed close ups of the expansion caps before and after install. They look to have a step on them on the outer edge and when I installed mine, I wasn't sure if they were properly seated. Basically, when installed, you will have a grove visible which makes them look not completely flush. Maybe it is a step designed in to be able to install something to pry them out.
You’re welcome! Mine are perfect dry after installing in this video. Just make sure to push all around the edges
Good vid. Will be changing mine soon. Did you post a link to the parts? Also, how often do you clean the throttle body?
Yup! It’s a kit so everything comes in one package from fcp! And I haven’t cleaned it at all, I would probably just replace it since throttle bodies aren’t too pricey! Good question
Helps Desperately Needed….I Changed My Cam Plug On My C300…Once The Engine Builds Temperature The Pressure Pushes The Cam Plug Out Causing A Leak.What Should I Do?…Do They Make A Sealant Or Something I Can Put On It To Stop The Leak?
Would the PCV vent valve cause rough idle and no check engine light? I've got slight vibrations only on idle :)
Good video. I 've ordered my parts from local MB dealer.
thank you and oem parts are a must for these cars!
@@UrielArtsGarage just had the job done today. Btw, we are members of the same group in FB. You once said that our cars look identical. But right now I can't remeber which W204 group is that haha.
@@wstarsx the w204 north east I believe! I'm in a few!
What was the part you are waiting on? That common causes of leaks too?
Cam magnets! next video after this! the front end of the engine!
Thanks for the video i have problem with breathing valve the last one you replaced the problem is that the middle diaphragm doesn’t fit into the oil pan pipe and it appears as impending tear how did you fit this part ?
are you referring to the crankcase oil separator? Here's a full kit from fcp euro that may help you visualize.
www.fcpeuro.com/products/mercedes-crankcase-breather-repair-kit-oem-515810
@@UrielArtsGarage yes the crankcase oil separator as the diaphragm in the oil separator doesn’t fits into the oil pan plug
What’s your method for keeping your engine bay clean?
Power wash and engine degreaser! Just make sure you cover the alternator and intake with a thick towel!
6:07 does that mean you’d have to change the gasket again or it can be used like that?
The new crankcase vent comes with a new gasket! Always get rid of the old one!
@@UrielArtsGarage interesting. Thanks 🙏🏽