Dude, you realize that giving that code out causes all kinds of grief for mechanics. They can change all kinds of settings In the features and options menu, not to mention setting a user code to lock the machine out that even I as a crown mechanic would have trouble...troubleshooting some whacked out setting or bypassing a user code from some disgruntled employee in a major distribution center...gerrr. That being said I do respect and appreciate your video, this is what this platform is truly for. Freedom of speech, and dissemination of information, cheers!
All you can do is hope that people use this responsibly. I do feel this will be beneficial to the average person. Better to see how to adjust the settings properly rather than find the code online and go in blindly and accidentally adjust or mess with something that you probably shouldn't.
I ask a question for it, Do you know alike timer auto stop cut power running on alike every time reset key to power on running, how do I disable auto-timer stop power?
Thanks for your question, I have not made that adjustment but it may be a user performance setting. Try to disable user performance. Let me know if that works otherwise I will look into it tomorrow for you.
I'm having issues adjusting the brake switch the correct way (I called outside tech and the truck still not fixed) I still getting Error code 319 please advise. thank you
@@dugue3000 Alright, try to connect the Tow Mode and press it in and pull it out several times and listed for the brakes to pop you should hear two pops the almost the same time. If they are working, check the brake peddle for an open circuit. Clear the past events and calibrate...
I’ve driven one of these before in the feature can you set the steering in reverse cause I can’t drive it in forward so how can I fix the settings to ware I am completely comfortable driving in the reverse mode
I've been using this same lift for the last 8 months at the warehouse where I'm employed. Was really hoping I could go in and change the max speed and the acceleration but looks like they were maxed out already. Maybe that's why it took a while to get used to this lift🤣🤣🤣. Anyways, so 7.8 is the max speed on this??? I really need a little more speed. Do they make a supercharger for this lift ? Hahahaha
These codes also work for a pc 4500 center-control rider pallet jack truck? Been looking for awhile now on something for my electric pallet jack so I can tune it up? Please help me out , thank you
Hi! Can you tell me what is the code to enable 14kmph on esr5260? Normally I can set speed up to 12kmph. Overriding this limit requires additional code.
This worked for my RC 5500. My question is- What setting would cause the lift to move at 1.0 mph with the mast raised? Two of my lifts are suddenly doing that.
That's not a setting or at least I don't think it is. There is a safety switch that is open when the mast is raised causing the machine to go slow. Once the mast is down to the last stage the forklift goes at normal speed again. On the lift I drive the switch is malfunctioned so the lift doesn't recgonize the open switch and continues on in normal speed no matter where the mast is located.
Im having the same problem on my rm6000. When the forks are raised or extended even a little bit it hits me with speed cutback on the led screen 🤦🏻♂️. I need that off
Is there anyway I could have a detailed list of what each input does. Ex. Accy speed. Accy speed (Fl), hoist ramp and the others? I notice some reach trucks operate sleeker and are more agile in the warehouse. Reversing and turning with a pallet on the forks is much quicker in other lifts. I'm trying to optimize my settings in any way to get the same effect. I've increased all the speeds I can. And sometimes it still is a little wonky. A list of what each these choices do exactly would be amazing! Thank you
After your in service press down or up to get to performance then go right change the N to Y up or down then the center button, when you go out by pressing left it will prompt you to save N change to Y and rekey.
One of my lifts have it to where you have to wear a seat belt and one doesn’t i need the setting to change the seatbelt to where it can be rode without one
You need to gain access to performance and increase it to your desired speed. There is speed forward and backwards as well as acceleration which can be increased. Remember to keep it at a safe speed that’s the most important of them all.
Go to service enter your access code, go to Features F11.1 = Enable, go down arrow to 11.2 = Code 1 = Enter a 4 digit code. Otherwise simply Disable it on 11.1 and Save, Re-key and you at P1 by default.
Please, does anyone know what is the code to enter the service menu, normally it is 2? 1? You know what code I mean, but you don't enter it must be another code. please help . My wahtsapp is +51970507703
Travel Alarm are very important for safety. Features menu F9 Travel Alarm has 4 choices Off, Forward, Reverse, and Both. Make your selection and remember to save changes
Performance levels 1,2,3 can be changed but first you must be off the pedals, go to Features Menu F11 then 11.2 - Enable used access code 2311 most likely or the code you set Push Enter, Press up or down to scroll to the Performance level you prefer Push Enter the Performance Level is Set.
Thanks to videos like this we have to go and change the service passwords at customers that require slower speed limits because their operators are turning the speeds up to max
You will need to replace the access 3 module, there is a diy video that will help you to decide how serious it is. If your not mechanically inclined we recommend you call your local Crown service to get it done right.
The access codes from factory are the same but they can be changed, if you do not have access you may need to call Can to have them reset to factory default.
No deberías de hacer eso porque hay áreas de trabajo con un límite de velocidad y si falla un accidente le hechan la culpa a los que los arreglamos en los talleres de las fabricas
2211 or 2311 is what the code . Which is the last 4 number of their phone number. I known this for a while but never did it on here. But the fast you can go is 7.? But still slow... This code works with all crown.
2311 is the access code, gain access through the service option. 7 is the fastest you can go, to change speed go to performance which also allows you to change the acceleration. The code works with most crown unless someone changed it. If you don't have the code you may have to call Crown Lift to clear it.
@@willvaldes1895 this code doesn't Control the speed but it also controls the hydraulic of the lifts too. You can have the lift go up slower or a bit faster when going high on top of the 2nd/3rd tear of the racking. Also understand or know your p1, p2, and p3 stand for
somebody took the governor off of our crown reach truck and the thing is a fucking rocket. it can move faster than I can run, it moves fast enough to get my hair blowing. super fun! just don't take corners that fast because you'll flip the bitch.
@@johnnyaguilar9702 don't stand on the lift or let say don't trigger the sensor when you step on the lift. Than you hold the 🔼 button it'll take you to P1-P2-P3
Every time management does something like this that reduces production we get told we're not working hard enough. I give it a week before this video sees a surge of views.
I drive this very same model at work. Best forklift I ever worked with.
thank you for this. it worked to change speed on our FC 5200
Your welcome, we’re glad it helped.
Dude, you realize that giving that code out causes all kinds of grief for mechanics. They can change all kinds of settings In the features and options menu, not to mention setting a user code to lock the machine out that even I as a crown mechanic would have trouble...troubleshooting some whacked out setting or bypassing a user code from some disgruntled employee in a major distribution center...gerrr.
That being said I do respect and appreciate your video, this is what this platform is truly for. Freedom of speech, and dissemination of information, cheers!
All you can do is hope that people use this responsibly. I do feel this will be beneficial to the average person. Better to see how to adjust the settings properly rather than find the code online and go in blindly and accidentally adjust or mess with something that you probably shouldn't.
@@crimsontide1980 everyone just wants to know how to speed them up or activate Express Lowering.
The service code is not 2311 no more do anybody here the new service code please share
I ask a question for it, Do you know alike timer auto stop cut power running on alike every time reset key to power on running, how do I disable auto-timer stop power?
On our crowns there is an option to go into maintaince mode and once in there the timer never shuts off.
Thanks for your question, I have not made that adjustment but it may be a user performance setting. Try to disable user performance. Let me know if that works otherwise I will look into it tomorrow for you.
I'm having issues adjusting the brake switch the correct way (I called outside tech and the truck still not fixed) I still getting Error code 319 please advise. thank you
@@dugue3000 Try to calibrate the brake to see if that helps. C3.3
thanks for your quick response.
Try that already, runs for a little bit then the error code comes back
@@dugue3000 Alright, try to connect the Tow Mode and press it in and pull it out several times and listed for the brakes to pop you should hear two pops the almost the same time. If they are working, check the brake peddle for an open circuit. Clear the past events and calibrate...
I’ve driven one of these before in the feature can you set the steering in reverse cause I can’t drive it in forward so how can I fix the settings to ware I am completely comfortable driving in the reverse mode
I've been using this same lift for the last 8 months at the warehouse where I'm employed. Was really hoping I could go in and change the max speed and the acceleration but looks like they were maxed out already. Maybe that's why it took a while to get used to this lift🤣🤣🤣. Anyways, so 7.8 is the max speed on this??? I really need a little more speed. Do they make a supercharger for this lift ? Hahahaha
same lol i feel u
I like to set acceleration at 5 it makes it so the hilo is not all jerky
These codes also work for a pc 4500 center-control rider pallet jack truck? Been looking for awhile now on something for my electric pallet jack so I can tune it up? Please help me out , thank you
Hi! Can you tell me what is the code to enable 14kmph on esr5260? Normally I can set speed up to 12kmph. Overriding this limit requires additional code.
All crown models should be 2311
This worked for my RC 5500. My question is- What setting would cause the lift to move at 1.0 mph with the mast raised? Two of my lifts are suddenly doing that.
That's not a setting or at least I don't think it is. There is a safety switch that is open when the mast is raised causing the machine to go slow. Once the mast is down to the last stage the forklift goes at normal speed again. On the lift I drive the switch is malfunctioned so the lift doesn't recgonize the open switch and continues on in normal speed no matter where the mast is located.
Im having the same problem on my rm6000. When the forks are raised or extended even a little bit it hits me with speed cutback on the led screen 🤦🏻♂️. I need that off
Is there anyway I could have a detailed list of what each input does. Ex. Accy speed. Accy speed (Fl), hoist ramp and the others? I notice some reach trucks operate sleeker and are more agile in the warehouse. Reversing and turning with a pallet on the forks is much quicker in other lifts. I'm trying to optimize my settings in any way to get the same effect. I've increased all the speeds I can. And sometimes it still is a little wonky. A list of what each these choices do exactly would be amazing! Thank you
how about doing this on a 2001 RR3020-45 machine?
Is there a way to shut off and or make the duration in which the truck stays on while not in use longer by chance?
How do you enable xpress lower on the RM forks?
can they disable the performance for Single Jack Crown 4500 series pallet jack? how can I access performance after 2311 code?
After your in service press down or up to get to performance then go right change the N to Y up or down then the center button, when you go out by pressing left it will prompt you to save N change to Y and rekey.
Hello. Would you happen to know the four digit code to speed up a 5700 crown forklift? Thanks.
Hello, I would like to know all the access codes of the crown, do you know?
Any info on increasing/decreasing speed on a 5000 series Crown reach truck?
Same way
The 2311 code doesnt work on mine but mine is different than the one in the video. I've been searching for the codes online but I cant find them.
If the access code has been changed you may need to contact your local Crown service department for a tech to come out with a laptop and reset it.
Slow is always safer. Some people drive it like a race car 🏎 and that could be dangerous. Thanks for the tutorial
The speed function should be similar, the access codes are usually 2311 unless it has been changed.
2311 has bee changed
How can I find other one?
In addition to code 2311 for RR S700 / 5700 access code how much broo..?
Please share, waiting for a reply.
If no one knows the code, you’ll need to call Crown to come out with a laptop to reset the code.
Thanks . I was tired of drive 5mph .😂
Anyone find a new code?
Is there any reason my lift won't go any faster? I've adjusted the settings to max but it still moves like it's at 3.0
Check your height sensor, the easiest way to check it is calibration, if it fails you need to replace the sensor.
One of my lifts have it to where you have to wear a seat belt and one doesn’t i need the setting to change the seatbelt to where it can be rode without one
How do you lock the speed so you can change it to p1 to p2
So once you click save do you turn the lift off the back on? Or does it save it without doing anything else ?
You should always re-key once your preferred setting are made, save then re-key.
do you have a video explaining how to program the height selection option?
good afternoon I have a crown c-5 2012 forklift but it is governed it is slow how can I increase the speed
You need to gain access to performance and increase it to your desired speed. There is speed forward and backwards as well as acceleration which can be increased. Remember to keep it at a safe speed that’s the most important of them all.
Do you know the password for the raymond lift truck model 425-C30TT. Thanks
yes do you know the code for me to configure the esr 5200 crown machine?

Didn't think the number would work on my companys fork but it did fuck yea
I have P2 set up with different speeds, however how do you switch between P1 P2 P3? That I can’t figure out.
Go to service enter your access code, go to Features F11.1 = Enable, go down arrow to 11.2 = Code 1 = Enter a 4 digit code. Otherwise simply Disable it on 11.1 and Save, Re-key and you at P1 by default.
@@forkliftiq once I enable F11 that will allow to switch between P1 & P2? Because I want P2 to be for a new driver.
Just setup codes for each and when you start up you enter the code for P1 or P2 or P3
Do you need a key to do this?
Yes you need a key and an access code 2311
Please, does anyone know what is the code to enter the service menu, normally it is 2? 1? You know what code I mean, but you don't enter it must be another code. please help . My wahtsapp is +51970507703
Code 2311 not working.. any other code 🤔
Can we reduce the back up alarm volume?
The alarm sound can be lowered but it requires programing software, maybe on your next Crown service call ask the technician to change the setting.
Do you have a override maintenance code he fixed it butbleft the maintenance mode on
Just rekey it
is there anyway remove the noice ? on them theres to much beep
Kenjiro C all the new ones beep loud af. I had to put tape over mine lol
@@markn3136 man thx for the advice but where the noice comes from lol
i keep hearing beep beep even when im home
Travel Alarm are very important for safety. Features menu F9 Travel Alarm has 4 choices Off, Forward, Reverse, and Both. Make your selection and remember to save changes
Does this code work for the rider jacks too?
yea
how can i do in a crown esr 5000?
te sabes el code pin de el JUGHEINRICH??
No
Ok, I get all that part. But how can you change between the different performance groups 1,2,3 ?
Performance levels 1,2,3 can be changed but first you must be off the pedals, go to Features Menu F11 then 11.2 - Enable used access code 2311 most likely or the code you set Push Enter, Press up or down to scroll to the Performance level you prefer Push Enter the Performance Level is Set.
@@willvaldes1895hey I tried all this but still not able to change from p1 to p2 or p3
How are you gonna get that ring off your thumb there my guy!!!
Are you still making videos on this equipment? Could you do a tutorial on how to operate it (drive it)...
Hello, we have these two videos that might help you;
czcams.com/video/pxvgZ-mUeqM/video.html
czcams.com/video/g7hm6Wzr23I/video.html
That code didn't work
How about the C5 forklift
The C5 should have similar programable settings providing the access code has not been changed.
Thanks to videos like this we have to go and change the service passwords at customers that require slower speed limits because their operators are turning the speeds up to max
Oh no!!
What does the RC stand for
Rider counterbalance. RC model is a stand up rider and a counter balance design as opposed to a straddle design such as a forklift that reaches out.
Do you own these trucks? What if your new hire saw this video?
Unless granted permission no operator should enter the settings. If they do take disciplinary action.
Where to see reach truck model RR5700 speed increase password
Is error = 309 a serious problem?
You will need to replace the access 3 module, there is a diy video that will help you to decide how serious it is. If your not mechanically inclined we recommend you call your local Crown service to get it done right.
Does this work on SP 3500?
How do you reset the code???
Taylor man40 only Crown Technicians can change the password with a laptop
How can I change my pin code
Can those codes be different for every machine
The access codes from factory are the same but they can be changed, if you do not have access you may need to call Can to have them reset to factory default.
No deberías de hacer eso porque hay áreas de trabajo con un límite de velocidad y si falla un accidente le hechan la culpa a los que los arreglamos en los talleres de las fabricas
La velocidad se ajusta para reducir ya que de fábrica vienen a la velocidad máxima.
2211 or 2311 is what the code . Which is the last 4 number of their phone number. I known this for a while but never did it on here. But the fast you can go is 7.? But still slow... This code works with all crown.
2311 is the access code, gain access through the service option. 7 is the fastest you can go, to change speed go to performance which also allows you to change the acceleration. The code works with most crown unless someone changed it. If you don't have the code you may have to call Crown Lift to clear it.
@@willvaldes1895 this code doesn't Control the speed but it also controls the hydraulic of the lifts too. You can have the lift go up slower or a bit faster when going high on top of the 2nd/3rd tear of the racking. Also understand or know your p1, p2, and p3 stand for
somebody took the governor off of our crown reach truck and the thing is a fucking rocket. it can move faster than I can run, it moves fast enough to get my hair blowing. super fun! just don't take corners that fast because you'll flip the bitch.
MengeR how do you change to p1
@@johnnyaguilar9702 don't stand on the lift or let say don't trigger the sensor when you step on the lift. Than you hold the 🔼 button it'll take you to P1-P2-P3
Necesito videos en español plis
Buenos dias, que videos le interesaria que hicieramos en espanol para el Crown RC5500? Dejeme saber. Gracias. Carolina
this is not a good idea pallet truck driver can really hear another team members
Sc 5200 code
No wonder our forklift operators keep changing the speed. Freaking CZcams
Our building just dropped our speed to 5mph. We'd get to the locations quicker if we just sat still and waited for the Earth to rotate them to us.
Every time management does something like this that reduces production we get told we're not working hard enough.
I give it a week before this video sees a surge of views.
get him or her. Females drive these too
the best thing is not to show any one
Ojala que alguien lo pueda traducir al español
I factory reset my crown high reach now it’s not going fowards or backwards . Any suggestions?
Maybe don’t be a idiot pal