Video není dostupné.
Omlouváme se.
Make A Circular Saw Guide Track | DIY Cutting Guide For Circular Saw
Vložit
- čas přidán 18. 02. 2022
- In this video, I show you to make a track saw for Makita's circular saw. Traditionally this guide rail I made from 12mm ply, And 32mm * 25 mm Aluminium channel. Simple DIY project.
►Subscribe to my channel and don't forget to click the bell 🔔
/ mistrymaketool
Visit My Official Website:
mistrymaketool.com/
Social Media:
Facebook Page: / mistrymaketool
Instagram: / mistry_maketool
Pinterest: / _created
Thanks For Watching...
Hit Like & Subscribe Button...
#mistrymaketool #diyproject
Beautiful track for the saw. Thank you for making and posting this video.
Pekerjaan yg sangat bagus dan rapih hasilnya jdi lurus pemotongan kayunya👍
❤❤
You gave me a great idea for woodworking. Thanks. I will try this.
Muy bien saludos mis respetos
Great idea, I'll try...thank you
I like the idea of this cutting guide. I will make one. Thanks for your video.
Супер!!! 👍 👍 👍
I cut a kitchen cutting board, the white slick one and mounted it to the bottom of the saw. Makes it slide easy and no marks.
Респект 👍👍👍👍
Молодца 👍👍👍
That's a cool video!!
Nice sharing my friend
Great ideas too, I think.
Very nice work ! 👍👍👏👏 Friendship to France
NICE JOB
A very good work 👍👍👍👍
1!!!
Беларусь 👍💪💯
فكرة رائعة شكرا جزيلا ارجو لك التوفيق
❤❤❤
Top de mais parabéns
Oooo
Wow رائع
Achei excelente o trab
Muy buen trabajo y muy útil la guía
Di
Ide yang bagus
Did you measure the cut piece to see if its true all the way down? Nice job thanks
👏👏👏👏👏👍 abraço de Brasil
Wow your idea is great
Quá chuẩn.
Very nice idea my new friend thanks for sharing this with more excellent moves
❤❤❤
the one who can cut with an angle grindeer with this excellence dosnt need a guide for circular saw
How right you are!
I was just thinking that 😂😂😂
Эта шина сильно ускоряет работу.
This project is not for him but for those who cannot cut straight without a guide.. Thanks for the upload..
رائع
Very very Nice job wontherfoul 💫🦅💫🙋
All I do is clamp a straight edge 1.5 inches from where I want to cut and hold the saw to it. Simple
Here you can see the exact cut line.
You have your way, others have theirs. End of the day we have a cut piece.
👏👏👏👏🌹
Lovely ❤
Nice
Молодец
Excellent work
Good
That’s great except most sheets are 8’x4’ or 2400x1200 so you need to actually join the base for this to allow for that length plus saw start and finish. Meaning you need to cut 2 pieces to make the base long enough.
❤❤
sangat bagus
👍
Think makita needs send you a track rail guide more work involved in your track
Trabalho fantástico, apenas faltou você nos explicar com fazer a medição do corte na madeira.
Miserável 😂 é um gênio.
use tile edging.... much quicker
надо было и на длинном уголке полку напильником стачивать.
How much is thw cost of circular saw the small one
stick sand paper to bottom of guide no need for clamps ?
what the measuring tool tat you use at 6.59mins
That's a combination square.
This is great for homeowners and weekend warriors , but if you do this for a living, you buy a good track saw, there's no substitute for accuracy and speed of operation
👍 OK
👍👌🇰🇿
Tapi bagaimana jika ingin memotong sudut 45 derajat, bukankah akan bermasalah
Or naye video uploaded karo sar thanks
why did you apply tape at 3:48?
This is a guess, but probably so he could fit the second side piece on tight against it and screw it down, and when we tool off the bits of tape, the rewound be just enough space for the saw to slide smoothly but not so much that it had room to wiggle side to side.
Another person who made this much more difficult than it needs to be.
why go to all that trouble. If he knows the motor side to blade is 100 mm cut and the non motor side is 40mm as my saw is you just clamp the bit od flat bar he had at the beginning to the board?????????? he did it to get the bit of wood in the first place.....OMG
makita this machine model number pls
Perfect tracksaw at 0:04 already. The rest of the video is a waste of time lol
Luiz Carlos
👏👏👏✍✍✍👍👍👍🇧🇷🇧🇷🇧🇷
this tool is not making cutting process simple. its again making complicated steps. the support for the cut piece is must in order to avoid the cut piece falling down.
For the time and money that you spent you would have been farther ahead to just buy one.
Time waste +saw blades depth lose.
to tell the truth - a slot in the middle of the guide is shit
Only time'waste
Чё за идиотские звуки курятника???
Very nice
I did something like this a month ago with plans from Woodglut.