Build the London Transport Routemaster Bus RM857
Vložit
- čas přidán 27. 07. 2024
- Here we have the second part of Pack 11 of the amazing brand new release from the folks over at Agora Models. Build the London Transport Routemaster Bus RM857 in 1:12 scale. You can order this from Agora Models at
www.agoramodels.com
Here are the Chapter Points
00:00 - Introduction
01:00 - Stage 111 - PANEL FOR THE NEARSIDE, PLUS BLIND PANEL AND TRIMS
03:14 - Stage 112 - THE FIRST PANEL FOR THE LOWER DECK
05:18 - Stage 113 - THE LAST PANEL FOR THE NEARSIDE
06:07 - Stage 114 - : THE NEXT PANEL FOR THE OFFSIDE OF THE UPPER DECK
06:46 - Stage 115 - ANOTHER PANEL FOR THE OFFSIDE OF THE UPPER DECK
07:23 - Stage 116 - PANEL FOR THE REAR OFFSIDE OF THE BUS
08:11 - Stage 117 - PANEL AND DETAILS FOR THE OFFSIDE LOWER DECK
09:34 - Stage 118 - THE LAST PANEL FOR THE OFFSIDE LOWER DECK
10:15 - Stage 119 - COVERS FOR THE BATTERIES AND BATTERY COMPARTMENT
10:58 - Stage 120 - ADVERTISEMENTS AND INDICATORS
12:59 - Stage 121 - WINDSCREEN WIPER, MIRRORS AND ADVERTISING STICKER
Subscribe to World of Wayne at bit.ly/307c9rj
You can now support the channel and see behind the scenes videos on my Patreon at
/ worldofwayne
----------------------------------------------------------------------------------------
My Social Media:
www.linktr.ee/worldofwayne
My Amazon Store
If you like anything you see in these videos I have an Amazon store here. Check it out
UK: www.bit.ly/worldofwayne
US: www.bit.ly/worldofwayneus
Get Amazon Music at
www.getamazonmusic.com/worldof...
Hope you enjoy this build.
#routemaster #bus #agoramodels - Jak na to + styl
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
I was talking about the indicators as I have seen them sticking out like ears on the real bus
@@kevinmartin3859 ahhh yer they can be folded back. They aren’t linked to the electrics. I have seen some peeps mod this though
I regret that I have but one thumb to give up. you can keep your supercars, this is by far my favorite build of yours.
Very well done, mate!
One of my favs too
Hi just to say thanks I build my agora bus watching your videos step by step turned out just perfect
After a hard decision I decided to go ahead and order this model ongoing for 24 months
Thank you Wayne
Damn! Hope you broke out the Wow Stick for most of those screws. Congrats on finishing another one Wayne! The interior lighting and signs really make the model.
Congrats on completion. Well done sirrrrrrrrrr. Thanks for sharing 👍
Wow, what a build, that's another one finished... so many screws.
Clearly over 1000 screws in that bulid then based alone on this final video.
Looks amazing.
Great video & congratulations on completing your Routemaster Wayne .. no wonder your hands were numb .. I believe the total screw count for the whole model is just shy of 3,000! Glad you are going to keep her .. my favourite one of of all your builds! In your final showcase you also forgot to open the bonnet & show off the AEC engine ☹️😊
Yep lol
Looks very nice !!!!! Only thing is the steering wheel is on the wrong side. LOL
Thanks Wayne, I have really enjoyed your build, humour and quality production. 👍
Just got to finish my bus now!!
Wow what a build. I watched all the vids. good job
Congratulations on finishing this epic build. I’m just finishing mine off and used magnetic tape to fasten on the advertising banners. Worked really well and they are removable.
Great idea
This is my favorite build to date
I love this build. It's gone together really quick. Seems like only yesterday you were making the axle.
Beautiful build. Well done Wayne.
Congratulations, that was a fantastic build. Thanks for sharing this experience.
Really enjoyed this build Wayne, not one I could stretch to I don't think so watching the build has been great. Thank you for sharing it.
A real excellent build I'm still toying with getting this depending on finance.
Excellent job Wayne. I rode in one up in Corning NY.
Wayne. That is really awesome. I have watched the whole build of this bus. Great job. Really nicely done. More models to go but this one is well done by you Wayne.
Utterly fantastic.
Fantastic build!!!! it's so big!!!
Very nice bus Wayne, enjoyed watching the series.
AYYYY!!!! It's finally done! Another vast achievement you have made throughout the months or years, Mr. Wayne.
Dear Wayne, outstanding! Best Wishes Johnny
Looking brilliant mate 🎉🎉
Epic build Wayne 😀👍
Looks great, nice job!
He is ready. Coooooooool. In Germany we must waiting for a wile.
Loved the build and I wish I had the patience and dexterity to do it,
Yeahh well done mate looks stunning what an absolutely fantastic amazing build this has been and you now have your very own Routemaster and another one of your partworks completely and expertly finished, once again congratulations, ding ding any more fares please 🔔🚌👍😊
This was a good build
Amazing
Great work dude glad you put the stickers on in the end looking totes awesome. As stated on live stream yesterday loving home here in the black Country for it lol.
Looks great makes me want to come and drive her,times climbing in and out of the cab of them hitting my head hehe ,so she’s a Dalston bus D13 that’s also her radio call sign ‘Delta one three ‘superb Wayne
Merry Christmas 🎅🏼🌲
Mark 👍🏻
I estimated that 2709 screws were used in the full build
I like your insight in to the build and enjoyed watching you build it. I'm surprised they didn't have passengers and a driver for the model.
Absolutely brilliant build! Thank you for sharing this experience with us.
I noticed Spock and Kirk through the bus window at 9:04 and couldnt help but think of that scene in Star Trek IV where they try to board the bus. Spock: "What does it mean 'exact change'?"
Cool!
It's a pity that if you buy the "full" kit from Agora that it doesn't include any of the magazines or the issues that had the passenger, conductor and driver figures.
finally the bus is done
What an awesome build, would love to do this one, not sure about those stickers though.....
I enjoy these videos as im always wanting some collections more but i cant to web site on here any other way so i find out to way and find more info?😊 That sure is a very big collection one
Should have done it with ( Pete and his bus ) advertising on it . Check out his channel it’s awesome
Absolutely awesome Wayne! I love that bus. It's huge and very detailed. Congrats on another successful completed build
That is one very nice build you have there Wayne the only problem with it is there are about 460 visible screws to many they could of either have the screws on the inside of the bus or use clips
What a fantastic build it turned out beautifully you had a lot of patience with all those screws
Hi Wayne. Great to see the Route Master bus finally complete. Shame the front route display isn't illuminated, though. 😁
? ??? It is
@@WorldofWayneUK Sorry, mate. But when you had the bus illuminated to show it off, I saw the rear and side route displays illuminated, but not the front one.
@@aryonllewellyn trust me. It works
Amazing build amazing job 💪💪💪💪💪💪💪👍👍👍🙏🙏💞💞🍺🍺🍺🐕🐕 one thing I noticed the notice door letters on the left side were not fully lit ??
I think it’s the light. They are all working fine
Brilliant build, one of my favourites, well done. Did they not supply advertising stickers for the top corners ?
Keep up the great work.
They did but to be honest I didnt like them
Wayne , this would easily have the most screws you have ever put into any model you,ve built .
I’m building mine currently,just one problem so far up to this moment,it’s adjust adjust and adjust ,then the red NM screws colour dropped…
My late father would had built this has he was born in London.
I think the bus just heeds some 3d printed figures to go in it along with the driver and conductor
Hi Wayne I have throughly enjoyed the build of the routemaster I will have do mine I have the /24 revell so slightly different one question do the front stick out from the bodywork it does look great I enjoyed the bismarck but this was an excellent build
I don’t think so
Great build! Surprised you didn’t play the theme from “On the buses” with Reg Varney!😅
😂
Wouldn't be catching that bus ... Aldwych on the front Liverpool Street on the back!
They were all on the same route
Hope that shelf is strong enough.
Me too lol
one cracking bus ride this was Wayne! Shame it had to come to an end. Looks a cracking model, something i would have loved when i was child! I bet the total screw count for that would be close to 10k if not more for the full build. If any upgrades come out for it later on, would you consider adding them to this?
I don’t normally go back and revisit as I get snowed under
Is that possible to fit an Action Figure inside? I mean, there is a way to do that besides unscrew it?
Well done! Another build complete. I'm on the fence to build this; but it is impressive. I'm disappointed and shocked that they have you place a long sticker on the sides rather than have them pre-printed as they did with the "London Transport." You would think that with the cost of the build + the difficulty to applying the sticker straight with no bobbles would be a near impossible task for some builders; that they would either be magnets or re-painted. 🤔
Hairdryer does wonders for bubbles
Great accomplishment. Not the risk to trigger your ocd. How did the panel repair go that was scratched? But really enjoyed this build. Favorite so far.
Just used one of those scratch pens for cars. Worked a treat
I was wondering why the advertising labels were so lumpy - you weren't supposed to fit the screws in the vertical strips underneath them. Also, why is there a cream screw in the middle of the 'London Transport' signage?
It actually worked quite well. The Roberta would have been there on the London Bus when the Ada were out over the top. It looks lumpy in the vid but when I put the hairdryer to it they came right out. I think Imposter a pic on social media. The single cream screw was to link the lettering. Just following the instructions on that ine
Brillant build Wayne!! I can't get over how many screws are in this thing! I'm curious...what finally convinced you to put the tea and crackers stickers on the sides? I really liked the clean look on the sides of the bus! But regardless...it's beautiful!!
On to the next!!
It looked to bare without it. I didn’t like the stickers for the front though so left them off
On this note, has anyone created additional stickers that could be put on the bus as a replacement for the standard ones? I am not in love with these but would love some advertising. Of course we can design these ourselves also and then use magnetic tape to make them removable but just wondering about alternatives from others out there.
Hey Wayne been following this build from day one. I am close to the end and noticed on stage 110 , when installing the top side panels, the instructions say "use only the top and bottom screw, the 2 central screws are not used at this time". This makes it easier to install the stickers later which based on the pictures, looks like that's what they did. Makes for a "cleaner look" as the stickers do not have to be applied over the screws. However I noticed that you did use the screws in the central part. Did I miss something along the way in the instructions or did you just decide to install these central screws anyway.
I kept mine there as on real buses they would have just been stuck over the rivets
I build my back in 2018-2020 by hachette partworks ltd. In my version i got 3 characters plus the driver and conductor did you not get them with agora
Why have you left the front indicators folded back? They should be sticking out at right angles.
They are quite loose and just fell back that way
Can you buy the figurines which go with this from Agora (which Hachette originally supplied during the build)?
Unfortunately no
Hey Wayne I’m from the US started the Lamborghini right when it became available was pretty much a week behind from when you got yours just wondering if you know what is going on I still haven’t received pack 4 but still being charged every month
I would contact Agora and find out
Hello Again my name is Mr Cannadine T. Boxill-Harris I was wondering, why couldn't you Rebuild a nice fresh shiny Volvo TD102KF, Volvo D10A, Scania N230UD, Gardner 6LXB and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Enviro 400 MMC’s and Repaint them to a Grey Green Colour's just like the original Scania Grey Green's which were in the East London bus route's such as 168, 141, 210, 125, 173, 179, 167, 313 and also the bus route 103, if you guys would like to Rebuild about 178 of Those Volvo TD102KF, Volvo D10A, Scania N230UD, Gardner 6LXB and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Enviro 400 MMC Buses Pretty Please could you Repaint them in the Exact Grey Green Bus Colour's and put them on the London Bus Routes witch are the 341, N41, 34, 123, N29, 149, 221, N73, 121, 86, 30, 262, 147, 396, 41, 56 and N26 for all of us because it would be a Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Interesting Buses to see them Repainted to a Grey Green Colour's and I'am a Big Fan of all of those Volvo TD102KF, Volvo D10A, Scania N230UD, Gardner 6LXB and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Enviro 400 MMC Buses Pretty Please?
Are the blinds removable as I want to print my own?
For modding I guess you can
The live stream bot's would have loved this with all that screwing 😄
Hi Wayne, I need a little help here. Some how when i was installing the last roof panel from pack 11 the paint ended up chipping for some reason. Do you know what colour the red the Bus is so i can do some touch up. Also, some reason i cant get the over head lights in the Bus to work anyone, everything else works but that. I don’t remember if there is a separate button for those lights or not.
Any help you could provide would be greatly appreciated. I love your videos Wayne, keep up the good work 👍🏽.
The overhead light? Do you mean the cab lights? That’s operated from on a separate button in the corner of the cab. The main deck lights are on the same circuit as the lower deck ones. I’m sure someone in the Facebook group had an idea of the paint colour
@@WorldofWayneUK Sorry, I meant the upper and lower deck lights aren’t working. Is there a separate button for them or are they on the same circuit with another light?
@@craigdax they should come on with the headlights I believe
@@WorldofWayneUK Hmm that’s what I thought. I wonder if I managed to pinch the wires somewhere putting the upper deck on or the panels. I really don’t see how I could’ve done that though because the wires are taped down.
Alright, thanks for your help Wayne.
Wayne did you not put the figues in i got about 9 with mine
We didn’t get any with the Agora build
@@WorldofWayneUK mind it would have made it longer we got 1 in every so many issues so you could say 9 more stages
Let me brag. My scratch is small than your scratch. I got the recommended paint and am wondering just how I get rid of the scratch. Can you enlighten me. I also got buffer pads for my Dremel. I have no idea how to apply it and buff it so the repaired scratch does not look worse than it did before I repaired it. Any help would be much appreciated. I imagine that it would be about the same for your biggggg scratch and my littleeeee scratch.
I ended up using this amzn.to/3FoI3WR
Were there anny molds for this build?
No
Oh did you mean mods?
Hello There my name is Mr Cannadine T. Boxill-Harris I was wondering, why couldn't you Rebuild a nice fresh shiny Scania N113, Leyland TL11, Volvo TD102KF, Cummins L10, Gardner 6LXC and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Alexander RH’s and Repaint them to a Grey Green Colour's just like the original Scania Grey Green's which were in the East London bus route's such as 24, 141, 168, 210, 275, 125, 173, 179, 167, 313 and also the bus route 103, if you guys would like to Rebuild about 187 of Those Scania N113, Leyland TL11, Volvo TD102KF, Cummins L10, Gardner 6LXC and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Alexander RH Buses please could you Repaint them in the Exact Grey Green Bus Colour's and put them on the London Bus Routes witch are the 341, N41, 34, 123, N29, 149, 221, N73, 121, 86, 30, 262, 147, 396, 41, 56 and N26 for all of us because it would be a Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Very Interesting Buses to see them Repainted to a Grey Green Colour's and I'am a Big Fan of all of those Scania N113, Leyland TL11, Volvo TD102KF, Cummins L10, Gardner 6LXC and Gardner 6LX 4 Speed Leyland Hydra cyclic Automatic Alexander RH Buses Please?
Check out David Say’s channel. He’s done his in the old Southend livery. To be honest the world is your oyster for how you want yours to look
2,000 $ dollars for 2,000 screws yeah good hobby !!
There are no visible screws or rivets on the exterior of the real bus. What a shame the model relies so heavily on these. It completely undermines the realism they've strived for in so many other ways. Surely they could have come up with an alternative - hidden screws or clip/glue together.
The full size Routemaster is held together with hundreds of rivets, with screws used on the panels below the lower deck windows.
So that damaged panels could be changed quickly without the need for a skilled coachmaker.
There are many bits that could have been improved such as the platform kick plate screws way too large. And also the roof joins. But overall I think glued panels would eventually fall off. The finished model is pretty heavy, and does look good.
The bus looks amazing. It is a pity that they don't suply the passengers anymore. they added a bit more realism to the bus, they even had a clippy on the back. A great build with lots of details,
Hi Wayne, I love this bus BUT my own feelings are it would've been better if they made the outer panels push fit with scale rivets as those screws are not helping the overall effect, still love to have one 👍🇦🇺
Great video & congratulations on completing your Routemaster Wayne .. no wonder your hands were numb .. I believe the total screw count for the whole model is just shy of 3,000! Glad you are going to keep her .. my favourite one of of all your builds! In your final showcase you also forgot to open the bonnet & show off the AEC engine ☹️😊
Great video & congratulations on completing your Routemaster Wayne .. no wonder your hands were numb .. I believe the total screw count for the whole model is just shy of 3,000! Glad you are going to keep her .. my favourite one of of all your builds! In your final showcase you also forgot to open the bonnet & show off the AEC engine ☹️😊