I been using the gasket wizards for many years now they are amazing, I don't use the cords, in my opinion every window tinter should have a set of them, they are not cheap but well worth every penny way better then taking off panels and gaskets especially if your working on high end cars I rarely ever have to take off panels maybe ones in blue moon. Just a tip if anyone gets them sand down all edges they are sharp an can damage the door panels. I actually vinyl rapped some of mine in carbon fiber they look bad ass.
JBIRD575 Regardless if you wrap them or don't I recommend sanding them because they will have sharp edges. And yes wrapping around edges is difficult take your time and use little bit of heat when your all done put them out in the sun for like 30 minutes . I ordered my gasket wizards from 44 tools.com as well as well as other tools or through solar gard because I em a solar gard dealer. I will try and post a picture of mine once I find out how.
Hey Ralph, off subject but when the opportunity comes can you do a video on tinting front side window on an f150 or f250 plz. Some tips would be awsome! Thanks
Great work Ralph, an inspiration to anyone looking to tint windows. I have a completely unrelated question for ya if you'd be so kind. I recently picked up a 79 chev El Camino, I'm looking to tint the rear and side windows. I feel after a few trial and error attempts on other projects that I can master the side widows however, that rear window has a nasty curve on both side. I watched the vid on you tinting that 4 door Lexus which had substantial curve but feel this El Camino might prove to be a bit more of a challenge. Any advice is greatly appreciated.
Excellent tool - The gasket wizard would save me a bunch of time when tinting front side windows on a Ford Crown Vic
I been using the gasket wizards for many years now they are amazing, I don't use the cords, in my opinion every window tinter should have a set of them, they are not cheap but well worth every penny way better then taking off panels and gaskets especially if your working on high end cars I rarely ever have to take off panels maybe ones in blue moon. Just a tip if anyone gets them sand down all edges they are sharp an can damage the door panels. I actually vinyl rapped some of mine in carbon fiber they look bad ass.
Yamaha82 88 how did you rap them around the edges you sanded thanks for reply???
JBIRD575 Regardless if you wrap them or don't I recommend sanding them because they will have sharp edges. And yes wrapping around edges is difficult take your time and use little bit of heat when your all done put them out in the sun for like 30 minutes . I ordered my gasket wizards from 44 tools.com as well as well as other tools or through solar gard because I em a solar gard dealer. I will try and post a picture of mine once I find out how.
Yamaha82 88 ok what grit do ya sand with bro??
JBIRD575 you can use 800 bro
Yamaha82 88 ok thanks!!!have good day!! Do you bottom load or too load???
Did u finish new slip solution what was the matter with the old slip...??
Hi!Ralph, tell me how you film XPEL? What films are you working on?
Should call it the interior door panel scratcher.
Send the link I need this these new cars are getting way to tight
Glad you are perfecting it :)
Hey Ralph, off subject but when the opportunity comes can you do a video on tinting front side window on an f150 or f250 plz. Some tips would be awsome! Thanks
We'll put this on the "to do" for videos.
Ralph Van Pelt Yes, I too would like to see modern f-150 front windows
I can’t even find the link in the description for the gasket wizard
It's actually been discontinued. You can find additional tools at www.flexfilmstore.com.
Easier just to remove gaskets!!! But cool tool!
Any samples of new solution didn't like tint tac it takes too much to slip!!!
JBIRD575
Soon
How I get the gasket
Great work Ralph, an inspiration to anyone looking to tint windows. I have a completely unrelated question for ya if you'd be so kind. I recently picked up a 79 chev El Camino, I'm looking to tint the rear and side windows. I feel after a few trial and error attempts on other projects that I can master the side widows however, that rear window has a nasty curve on both side. I watched the vid on you tinting that 4 door Lexus which had substantial curve but feel this El Camino might prove to be a bit more of a challenge. Any advice is greatly appreciated.
Edward, King
Heat mold it and trim it from the inside.
What's the new solution what was wrong with the tint Tac???
JBIRD575
Possibly making Tint Tac more concentrated and adding more preservative to lower maintenance on bottles.
Ralph Van Pelt sweet try the new orange tint slime 4 times slip its great!!!!
Ralph Van Pelt hopefully yours will come out good like there's there's wasn't slippery enough either
Hang water gallons on bungies cords
how can i buy gasket send me information im jesus
Www.flexfilmstore.com
RALPH,TELL ME WHERE TO PURCHASE THESE STAPLES FOR THE INSTALLATION OF FILMS INDISCRIMINATELY CARD CAR DOOR?
sergej soldatov
Www.flexfilmplus.com
I LIVE IN RUSSIA, I'LL BE ABLE TO ORDER?
sergej soldatov
If you are willing to pay the shipping and other related expenses... yes
THE PRICE OF SUCH DEVICES IS WHAT? COULD YOU TELL ME ROUGHLY HOW MUCH WILL SHIPPING COST? I STILL PLAN TO BUY SOME TOOLS
sergej soldatov
You need to email your shipping address and a tool order to sierra@flexfilmplus.com