G-WAGON TWO DOOR SQUARED BUILD

Sdílet
Vložit
  • čas přidán 11. 12. 2023
  • Some three years ago I had a great idea. The new G was just released. Another nut case in Finland had just made a SWB G with the newest new look (originally it's a 350TD-1993) I was sure MB was going to make a squared model of these later, as they did with the previous model. So I bought the car and designed and ordered bits and pieces needed to do this before MB would. Unfortunately this project took more time than expected so MB was first to launch theirs, with 4 doors though..
    This has been a big project, again bigger than you think. Nothing was bolt on...
  • Auta a dopravní prostředky

Komentáře • 24

  • @amgtrnd2245
    @amgtrnd2245 Před 7 měsíci +15

    Love the build. I would definitely push the wheels out further. Maybe the portal axels will help.

    • @ronicollin7992
      @ronicollin7992  Před 7 měsíci +3

      Yes, can't go out further without more hight = portal axles

    • @noneedtofotofood
      @noneedtofotofood Před 3 měsíci

      ​@@ronicollin7992 you can also take a look at Sprinter 4x4 axles, they fit the G in most every way, work the same but are at least 5cm wider on both sides.. that is if you dont want to put the square boxes on it. Nice build!

  • @TheGabirt
    @TheGabirt Před 7 měsíci +9

    Luulin vanteita mersun vanteiksi eli hyvin hämäsi myös "harrastajaa"! Mahtava oem+++ projekti, sekä ylipäätään itseäni miellyttävällä visiolla toteutat projekteja!

  • @jlehto123
    @jlehto123 Před 7 měsíci +11

    Hieno esimerkki miten rakentaa tyylitajulla eikä vain rahalla ! Jos toiseen paikalliseen G-sarjalaiseen vertaa...

  • @szabolcskomaromi
    @szabolcskomaromi Před 7 měsíci

    How cool! 🔥

  • @turetur1141
    @turetur1141 Před 7 měsíci +7

    7:19 In my eyes the carbon fenders reach too wide compared to the wheels. I would probaply slap a set of spacers there or order a new set of wheels with way more negative offset, or both😅

    • @ronicollin7992
      @ronicollin7992  Před 7 měsíci +1

      Needs more lift for more aggressive fitment. It's maxed out with this hight. Portal axles would solve this.

  • @tuomasl7647
    @tuomasl7647 Před 7 měsíci +3

    Hienompi kun vatasen :D

  • @xMaiRou
    @xMaiRou Před 7 měsíci +1

    Onko 996 saanu jo muodonmuutoksen :P ? Olis kiva nähdä joskus projektista alusta alkaen pätkää :)

  • @ryanc3656
    @ryanc3656 Před 4 měsíci

    It really needs the portals, to widen the stance a bit

  • @FURSAnagentti
    @FURSAnagentti Před 7 měsíci +1

    Suzuki Jimnys big brother👍

  • @jupeka777
    @jupeka777 Před 7 měsíci

    Tyylikäs! Oon aivan heikkona näihin mesen G malleihin. Joku Suomessa laittoi Teslan akustoa sekä sähkömoottoreita ym tollaseen mutta vanhempaan G Wagoniin. Mitenkähän se projekti edennyt.

  • @heyitsomar
    @heyitsomar Před 6 měsíci

    Looks great! What engine/drivetrain does it have? Original from 1993?

    • @ronicollin7992
      @ronicollin7992  Před 6 měsíci

      Yes, it has the stock 350TD engine and drivetrain.

  • @rebelking68
    @rebelking68 Před 7 měsíci

    ….mikä se tekniikan ”päivitys” oli ?

    • @ronicollin7992
      @ronicollin7992  Před 7 měsíci +2

      Tekniikkaa ei tosiaan päivitetty, eli kone on vakio

  • @NearCry91
    @NearCry91 Před 7 měsíci

    But is it really a squared if it doesn't have portal axles?

    • @ronicollin7992
      @ronicollin7992  Před 7 měsíci +1

      No it's not. Just looks like one, If their would be a 2-door version that is..

  • @carlosmena9812
    @carlosmena9812 Před 4 měsíci

    Show the car more

  • @eerikmaatta960
    @eerikmaatta960 Před 5 měsíci

    Tee auto esittely video jossa näytät suurimman osan sun autoista.

  • @user-os9ct8hf8x
    @user-os9ct8hf8x Před 6 měsíci

    я зашел посмотреть на тачку! а не на мужика:)...

  • @karolnowosad9765
    @karolnowosad9765 Před 4 měsíci

    Intakes destroyed whole thing. This car will probably see only roads so why make it ugly?