Making a Novation Launchpad From Scratch
Vložit
- čas přidán 9. 06. 2017
- In this video, I build my own DIY midi music launchpad from scratch. This project can also be referred to as a 64 button midi controller or Adafruit's untztrument soundboard. I used Adafruit's tutorial for the wiring and software, and I used Tinkercad to design a case to print out on my Tronxy 3D printer. All of the credit for this project should go directly to Adafruit.
► SONG COVERS AND LIGHT SHOWS ON THIS LAUNCHPAD • Song Covers on my DIY ...
► Adafruit's tutorial: learn.adafruit.com/untztrumen...
► 3D Printed case STL file: www.thingiverse.com/thing:237...
► My 3D printer: www.amazon.com/gp/product/B09...
▼EBAY PARTS LIST:
4X M3 10mm Screws
4X Silicone Button Pads: www.adafruit.com/product/1611
4X Trellis Boards: www.adafruit.com/product/1616
Arduino Leonardo: rover.ebay.com/rover/1/711-53...
LEDs: rover.ebay.com/rover/1/711-53... - Hudba
It's obvious that buying a launchpad is way easier than building it by yourself, so as you're here now, can you simply shut up and appreciate this guy, his experience and passion instead of writing unnecessary comments? thank you, have a nice day :)
It seems like most haters comments are from the kiddies that neither understand the purpose of DIY nor what he said at all.
literally hes figured out and built something most cant lay claim to doing, we should all appreciate what hes done here honestly.
Luna but he is genius and creative
@@chanhien4000 but some DIY's are fake asff
Wrong
this video isnt about building a CHEAP launchpad ITS ABOUT building one
Who said it's cheap? It's DIY, not cheap ._.
KazeRV nice
I only made this comment because people in the comments were saying omg its not cheap im not gonna do this, i was like that wasnt the point of the video...
No it's from scratch
A5archer no just by the bits and pieces that's expensive because of all the modules that have been put inside
u got my respect! Thats soooo freaking epic :O
ikr so cool
not as good as a regular launchpad though
haha i could fix that one led but thats too mutch work 🤣 earned a like on that one
Surprisingly easy on the electronic and software side of things, creating an interesting shape for the controller is the hard part, I feel if I was attempting something like this, it would have to be an interesting design to make it worth it, but I really like what you did, not being a musician will make a lot of people smile. 😊
great video man, much respect for the effort! Looking forward to seeing what else you do
How to have a launchpad:
1 Go to amazon
2 Search launchpad
3 Buy a launchpad
Done.
RushYx lol ikr
RushYx babbolo
不錯
I prefer the UNTZ over a Launchpad. It's smaller, more compact, and simpler. Yeah, setup is a hassle, but who really cares?
But you dont get the point it is soldering
Wait WHAT!? Your the guy who made this video 😂😂
I remember seeing this video a long time ago when i got intrusted in launchpads
And i randomly saw your epic mouse video awhile ago 😂lol
So this is a example of a Genius who is probably gonna invent the flying cars 🚘
you should make a disco ball
just shiny square plates shaped into a ball.
kinda hard
4:58PM I already have a real (really big) one, but I also think that would be pretty cool! :D :) 4:59AM 7/24/2017
6:15 he´s just said adiós hahaha
Impressive work!
Me: DIY Launchpad?! Sure!
Step One:
Buy
-3D Printer
-Souders
-LED's
-E-Boards
Me: Buys a $100 Launchpad online.
1. You don't need a 3-d printer
2. Whats a Souder?
3. LED's are pretty cheap
4. You have a point there
I made one of these before this guy.
PotaTox 😂😂😂
George Zhang true
Dude, chill. I was just making a point. No need to get fired up.
The advantage of DIY is that you get to adapt the firmware to your own needs so it can be used in different ways that an off-the-shelf Launchpad can't.
Very nice idea, bro!
5:37 Don't let me down 😂
How
I wish I had skill like you.
don't let me down
aha türk launchpad videoları çekiyorum kanalıma bak
Brick Launchpadder vay türk launchpadci hemen bakmam lazım bende alcam para biriktiriyom zhjzjz
EWQ:EWQEWQEWQE
mk2 yada pro al mini alma
Brick Launchpadder öyle yapcam ztn
so cool dude!
man this guy is under rated
song war dont let me down
This Is creative!
5:16 Who else thinks that actually sounds pretty good?... XD 4:57PM 7/24/2017
How many of you watched it but not builting it
Very cool!
Can you just make a 4x4? Or does it have to be 8x8?
You can make a 4x4.
You can make a 4x4, the whole thing is really just 4 4x4 boards joined together.
Hey! I did the same thing! If you want I can link you to a video I made on it.
Sure!
Hey that's pretty cool! Nice job!
No I'm not. For some reason electronic grenade deleted all of his comments. Also, if you watch the follow-up video to this, then you'll see that he actually gives me a shoutout for writing all the code
you are awesome dude I hope I soon get into electronics to do awesome diy like you!
Do it. It's a ton of fun, and it's not too hard.
WOW!! I am sure EVRYONE can do this mean, who DOSENT have a 3d printer!!!
David Woods Ya! and who doesn't have random computer chips, LEDs, or anything in this video!
I did it and I don't have a 3d-printer. You don't actually need it, you only need the actual parts. Also, you don't have these things laying around, you buy them of course silly. This video wasn't titled "EVERYONE CAN MAKE A DIY LAUNCHPAD!".
David Woods Was this videos name "How to build a launchpad for yourself"?
Agkittens Was this videos name "How to build a launchpad for yourself"?
PotaTox Was this videos name "How to build a launchpad for yourself"?
Very good video !!
Thanks mate!
U need to clip ur nails
dj wolfie 😏😏😏😏😒
You are a genius
late notification, i'm so satisfying with this process :):D
I like your videos and keep with it
Instead of ripping the pins off of your arduino, I'd suggest investing in a desoldering pump or desoldering iron. You're probably not going to damage your components by just ripping off the pins but, there is a small risk. It's more useful if you wanted to remove something like a through-hole IC or possibly reuse the pins for whatever reason. Anyway, good video and well presented.
I liked your vid cause it is very cool
Very nice I’m gonna go buy a novation one though
Impressive
OW, HOW LUCKY I AM THAT I'VE GOT ALL THE EQUIPMENT NEEDED
Thanks
5:30 beat was bouta go hard
Aye this was made on my birthday lol
I always wondered how you could do this.
FINALLY A USE FOR MY ARDUINO THAT I BROKE THE PIN HEADERS ON AND DIDNT BOTHER TO REPLACE THEM!!!
Please tell me it works with uno
It does. I'll explain how to do it with the Arduino uno in my next video
Master cool 😎!
in fl studio, there is the fruity keyboard plugin. it would be possible to map the midi values of the launchpad to that and use it on about any plugin
You're funny sir 😂
i like that song
Im never going to make this, but i watched the whole video anyway
If you wish to make a DIY Launchpad from Scratch, you must first invent the universe.
That'll be my next project.
5:35 the song is called,,Don't let me down" :D
I bet this video gets over 1 million views
Tried to search for this almost a year ago, found nothing. Then i decided to start a project like this myself.
Building A DIY Nailcutter From Scratch next pls!!
Yeah unipad is good
So mich effort but so cool
Subbed.
can i can buy this 3d launchpad case
nice, matrix 12x6. 12 faders possible ? any simple brain or kit for beginner .. best vibes
It will be a lot easer to just by one
great video, the only thing is i dont know anything about how to solider stuff or circuitry
Awesome project bud, but take care of that solder tip.
1:06 i got one of those today in science class we were making flashlights
Really should use heavy wire - like cutoffs from resistor leads - to join the boards together. Solder alone is not strong enough.
You played don’t let me down
You played don't let me down
Gues that song: don't let me down
Boi 👋🏻
oh you can do what i did before i had a launchpad print a picture of a launchpad and start learning all the projects you want on that peace of paper
Download Unipad on a mobile device.
Is it possible to add the other buttons like on the real Launchpad? So that Unipad or so works?
Who can afford a 3D printer but not a launchpad?
You don't need the 3-d printer.
I'd like to build one but use mechanical switches for the more springy feel.
you could just build a custom macropad
Wow
does this launchpad work with xfer records serum?
The song is called don't let me down
can i use this boards to make a hotkey keyboard aswell?
Don't let me down!
Yep! Well done!
The song is Don't let me down!
Whenever I upload the code it gives me this message; 'usbMIDI' was not declared in this scope
help please?
凄い
I see these comments saying not to leave hate comments and I wonder who would hate on a man with a brain the size of a great dane
its more easy to buy a launchpad but great job
Someone needs to modify this library to use WS2812 RGB leds, it will be amazing
dont let down
Why didn't you solder (sordered?) a small piece of wire across the pads instead of nearly detaching the track from the board with unnecessary heat?
WatasihazibunnoDIYlaunchpadotukutta.
I thought it was a fake meme video but it was legit..
For Samsung users, use Soundcamp. It has a virtual launchpad
Can you made a diy version of the op 1?
i need You right now is the music
3:24 I don't wanna go to a library
song was don't let me down(failed version) at 5:23
Electo make a roller coaster but it’s Minecraft
i did all the steps but i dont see the lights working for some reason but i can hear the sound :( pls tell me what to do
does it work with ableton and fl studio?
woher sind diese transparenten Knöpfe her? die sind ja super
when i plug in my device to upload it, it says usbmidi was not declared. How do I fix this?
Is it velocity sensitive?.? Can't find this info anywhere on the net,.. and is that capacitive touch sensors
The adafruit Trellis has no velocity sensitivity, so no.
And the actuation pressure varies, but it's about 200g or more.
Noice
SONG COVERS AND LIGHT SHOWS ON THIS LAUNCHPAD --> czcams.com/video/EzsMiBHFF0E/video.html
The song is"Don't Let Me Down"
Bensakate congratulations! You win 100,000 dollars!
In Monopoly money!
all most there and you can use ableton with that launchpad
Electronic Grenade don’t let me down
Electronic Grenade play skrillex
Neat stuff man, I envy your dedication!