Maschine Tutorial: The Ultimate Beginner's Guide to Sampling!
Vložit
- čas přidán 22. 08. 2024
- Affiliate link for NI’s Cyber Sale: bit.ly/3shOhnI
Get Komplete new for less than half off! Check this vid: • KOMPLETE 13 New for le...
Pick up Maschine here!: bit.ly/384VmJ5 (affiliate link)
This is a big one! All about the sampling and slicing in Maschine for the beginner.
This tutorial is using Maschine 2.8 on the Maschine MK3
Everything here would apply to the Maschine Mikro, but you’d be using software instead of the hardware knobs etc.
Go to www.gibbonscreative.ca to contact me or see what I do.
Go to www.artswoodde... to order a custom built case for you Maschine!
I understood that wholeheartedly. Great at teaching. For the life of me, I couldn't figure out sampling. I'm glad I came across your videos
no nonsens small-talk-chitter-chatter-music-graphics-5-minute-intro. Just step by step tutorial on how to get from a to z. I wish more tutorials was like this.
I never comment but It would be a crime not to. This is THE BEST Maschine tutorial I have ever seen. Thank You!! Native Instruments owes you big time.
The best CZcams tutorial on Maschine I've seen. Clear and concise with attention to details. Thank you
Appreciate it!!
What software are you using here?
I’ve watched a load of Maschine MK3 videos, and I find yours to be the most straightforward and easiest to follow! Excellent work.
This is the best Maschine tutorial ever.
I may have forgotten to comment on this video but this is absolutely the BEST Maschine sampling tutorial I've seen, period. Period. I've seen a lot of them. Jef, PLEASE make a ton more videos on Maschine and anything else.. you've definitely gained a new subscriber. Brilliant work. Never boring, informative, and great explanation and you truly go over EVERYTHING. Thanks!!!
The kind of teacher i would have loved to have in school..the fact that your videos don’t get any thumbs down says loads about your teaching style and quality of your videos, you simply rock dude!
factz bruh not everybody has that gift
By far the best tutorial on MK3 sampling I've seen till now. Thanks Jef (subbed, ofc)
have you looked at Blezz beats? i think that is the name. Dude is funny and explains things in a funny way but delivers. IMO
@@whendoesthisend Thanks Fred, I'll check him for sure
pZ Beats Jeff is very clear. Awesome vid
Word
@@whendoesthisend yeah Blezz is a beast aaaaaand funny as hell. He knows his stuff too
Jeff your Mk3 Tutorial Videos are so easy to follow and understand, you don't rush through them and I just want to say thank you for these. Keep em' coming!
Thanks for the comment! I have more in the works, coming soon!
The MK3 has to be my favorite piece of gear. I just love the look and feel of it.
I agree, it's just fun to work with!
just upgrade from the maschine mk1 to the mk3... worth every last penny! this thing does so much amazing stuff and your videos are the best tutorials for the equipment on CZcams and I know because I've watched a LOT of them. thanks and keep em coming!!
Dude, hands down, you make the best instructional videos I've ever come across in the past 5 years of studying equipment and software functionality on CZcams. You really have a knack for explaining things you're doing along with your video edits... The way you vocally reiterate certain moves you're making that you've taught earlier in the video or previous videos without being redundant. I love it. I really walk away from your videos feeling absorbed. 👍🏼 So sick. My Maschine hasn't even arrived in the mail yet and I already know for a fact you took the learning curve out of my way. 💪🏼 Keep em' coming! Appreciate you! 🙏🏼
I can't believe the synchronicity I am experiencing on this journey. This channel and its tutorials are perfect timing, as I am getting my MK3 this Thursday.
+James Biggins thanks James! That’s great to hear, have fun with it man!
I just want to say this is the 1st best video i have seen on a tutorial of Maschine i have subscribed to your channel thank you for your VALUED effort 10 out of 10
Really appreciate it Eric! More coming this Fall...
This is the best maschine tutorial for all levels I have seen on youtube. Thank you, cant wait to check out the other maschine videos. Excited like i found a goldmine...
Jeff you are a wonderful teacher and I cannot tell you enough how much I appreciate this series. Sampling is the reason I got my mk3 and you've made getting started tremendously easier. Thank you for helping me keep my excitement getting started with this maschine rather than spending the whole first day confused.
Best Maschine teacher on the net. I have severely benefited from these videos, your teaching style is perfect for me. Thank you for taking the time to make this.
Thanks so much, means a ton to hear it!
I finally realized after all these years that Maschine is so much more than a beat maker. Mine is on the way in the mail. This is one of the better videos I’ve seen showing how powerful it is. The lock and morph functions really got me sold on it but the sampler functionality looks amazing as well. Thank you for the quality content.
Piling on to say you have become my favorite Maschine instructor on here. I don’t even need to watch the basics anymore but here I am.
Man, you are a breathe of fresh air, I am 72 yrs old but still in the game! Jef you explain Maschine so even my Ol Azz, can understand it, you should been around when I got my first Maschine , that didn't't end well !
I had barely used my MK3 because it's just so overwhelming but these tutorials are nothing short of amazing. Thank you!
Thats great to hear, thanks!
You're the Goat! Easy to understand, nice commentary, no extra blabla straight to the point. Well done!
Legendary. Been fumbling on my maschine mk3 for a year and still got more than a couple tips from this video.
I enjoyed your tutorials Jef. My Maschine arrives tomorrow! You got me really excited to get started sketching ideas.
howd it go?
@@thabeachmaster324 I love it! Also picked up a KK S61 about a month later. I've been loving Output's libraries as well as NI Komplete 12 Ultimate. There's really no limit to what can be produced. As primarily a guitarist, this has really opened up so many creative doors.
I would also agree working with the mk3 is the most fun with music ive had in a very long time!
Thanks for the video!
What you said at the end was so true. The Maschine sampler can be intimidating at first, but once you take the time to sort of acquaint yourself it opens up a lot of different possibilities
Where would this world be without you Jeff? Thanks a lot!!
This is what I like to call an "Tutorial" - thank YOU ! . . . . from COLOGNE
Total novice, just bought a mk3 and came across your brief theory vid and now onto this. Very detailed, straight to the point and logical. Will be watching more. Cheers!
You are hands down the best maschine teacher out there. No contest.
Very pro presentation and excellent demonstration. I’m deciding if maschine is right for me and finding your videos beneficial.
That's great, thanks Luke!
These tutorials are incredibly helpful. I owe you several beers for the brain ache you’ve saved me. Thanks a million. 👊😀
I just want to say thank you .I look at a lot of videos and don't understand but yours i understand so well and they have gotten me so far ahead in my production thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!
I got a Maschine in the mail last week. Your videos are a tremendous help. Thank you!
Nice, have fun!
Another great tutorial. Right now I have a Maschine Mikro, but watching this makes me want to upgrade to its big brother.
Thanks! Yeah, the screens are nice!
@@jefgibbons That's what I'm thinking! Less interaction with the computer, and more hands on the Maschine.
awesome!!! got the day off cause of the storm and decided to watch your Vid and i learned more in 27 mins then i have in 2 years thanx boss
Thanks John! And man, stay safe!
Man with you, Accurate Beats and Beau tyler I think I finally have sampling in the Maschine and Maschine DAW down. THANKS!!!
I haven't been using Maschine to its full potential. This is amazing
I just applied 90 slices of the Amen via single mode to five groups. Ready for my lifetime achievement award.
One thing for those who might be wondering: if you apply your slices to a group directly - without hitting Button 5/Single - then only the first 16 slices are exported. Not good in this case. If you have more slices, you have to 'apply' them all via single mode to different groups. Of course, each group can only have 16 sounds. Alternatively, you could pre-remove all but the 16 sounds you want; if you only want that many.
Good as this video is, am I just being an old grump when I write that this video is not about “sampling” but about manipulating “samples”. I was looking for “a beginners guide to sampling” ... that is making a sample from an input and THEN setting it up.
Once I’ve found that video I can perhaps return to this guide on setting up samples on Maschine.
Thanks for this video. I’ve seen it so many times. Helped immensely. Just got in my recommended feed, good times.
I love this guy! He is so thorough and has helped me so much. Thank you.
Appreciate it!! So glad it helped…
@@jefgibbons No thank you, I've watched a few of your vids and always refer back if I get stuck or forget something. 🙏🏽
As a new MK3 owner, thanks! 👍🏻 Love that you can Refine Start/End on next page while using Detect Mode.
Thanks bro. Your videos give me life on this Mk3 business...
Glad to hear it!
Fantastic tutorial! You explain everything so clearly and give great visual examples. Thank you!
Excellent videos Jef. You are a great teacher and make it all easy to understand.
Best tutorial I ve come across on the internet so far :) Keep it up, great teatching skills, honest comment from education department employee. Cheers from Canada!
Really excellent support and training! I have learned a lot and it is impressive, how quick and perciese you are able to samle and modify the slices
Took me a month to finally figure out how to record each sliced sample from the pads, onto my patterns with the rest of the beat. You have to get out of slice mode and push PAD MODE and THEN it will record your sample performance onto your song.
Dude this has been my issue, every time I try to record, it plays the sample on top of itself and it’s so annoying. I’m gonna try this today when I go home
This video is saved in my bookmarks because it's a great refresher & you're awesome!
Glad to hear it Michael!
Thank you Jef for your super short and very informativ "The Ultimate Beginner's Guide to Sampling!" tutorial.
Hey Jef, I'm a newcomer here. I have sworn to Ableton Live and Push, but got a good deal on Maschine a few months ago. It's always good to not restrict yourself too much, although I do actually find that limitations often help the creative process (not that Push is limiting!). I digress. Just wanted to say I really enjoy your vids for learning the Maschine, which I find less intuitive than Push, but still a nice piece of equipment. Keep them coming, truly inspiring for your talent and you're a really good teacher. Thanks! There is one thing that keeps me from using the Maschine more actively, and that is the problem Maschine has by clipping and slowing down way too early in the process, which stops the creative flow. I end up just exporting the clips to Ableton and take it from there. I would like to see your take on this.
You make the best tutorials for Maschine MK3. Thank you for all the vids! 🙏🏼
I asked for this video in the comments of the last and you made it. Now that’s service. Thanks man!
Yeah you did, and it inspired me to get the video done!!
@@jefgibbons a bunch of my friends have bought a maschine recently and I'll definitely recommend they watch and sub to your channel. Thanks again! You rule!
It's absolutely brilliant. Good teaching.
great explanation on everything. natural and very descriptive for begginers
These tutorials are incredibly helpful. I owe you several beers for the brain ache you’ve saved me. Thanks a million. 👊😀
Man this video is the best ever. I've been searching for a tutorial that I can learn to sample and chop in MK3. This is perfect... Great job!!!
If you want to keep your edits,do not record or drop the sample in " sample mode". First put an audio module on the sound.Then go to record or drag in your sample. Make your edits,THEN convert it to sample. It will maintain all your edits and stretching,and you can just go to slice mode.
You are just good at what you do.... I love all ur MK3 tutorial videos. Especially the scenes and patterns ones.
Keep bringing them videos mate, you are the 👌
I like how you have broken it down and made to very clear for me to understand, thanks
You’re welcome, thanks for the comment!
Recently I bought my own Maschine mk3. I really love to use it but I am little struggling with the function of the gear. This 27mins clip saves lots of my time in doing sampling with the Maschine. Thanks a lot.
You are most welcome!!
So glad I found your channel. Great tutorial. I love that you LOVE Maschine. Watching some more now.
I have a hard time following manuals. Its just not how my brain processes info. So a BIG UP to guys & girls like you.
Love your work. Much respect!
Straight up, this dude knows what he's talking about so well that at approx. 5:30 he makes a mistake and it is a PERFECT teaching moment. Jeff Gibbons... You're the boss. Fan for life!!!
Jeff, thanks so much for the great Maschine tutorials. I've been really struggling since most tutorials i've found were done before major updates to the Maschine software. Yours have been the most helpful and i've learned a ton!
Glad to hear it Douglas!
I just got the new Mk3 and have been following your videos to catch up with the updates from the Mk2. They've been really helpful. Thanks a lot for your work, Jef.
If anyone is looking for a Maschine, I have on listed right now on eBay (It's limited edition gold, near mint).
Keep making great content!
Specialy the part at the end I totaly agree. It also brings me, as a traditional DAW user, a lot of fun and it realy was the missing part for a long time. Thank you for the clear and helpfull tutorial.
Thanks for the comment!
Really enjoying these videos..once again..keep arriving back here Jeff...way much more fun once you have nailed it. ⭐️⭐️⭐️⭐️⭐️👍🇬🇧
The instructions are really good. Thank You. I'm a beginner and this helps me.. I'm not a beginner dj though. I want to buy this and make beats for my new gigs.
Jef, please make a video about the plug-ins of Maschine MK3. What plug-in does what to which sound. Will be super helpful. Thanks.
Thank you so much for this because I now have full confidence about what I am doing. I will be watching more of your tutorials!
Wow! I am so thankful for your great tutorials. Just got my Mk3 and needed a nice jump start. Thanks!
tnx. specialy at the end, when you say not getting frustrated :-). But I agree also that it is absolutely great and nice to play with. Only the coop with Cubase stays a little difficult.
Wow! You are an incredible instructor! Many thanks for this tutorial. Im working on a BIG project and this is exactly what I needed! Peace, Matthew
Almost to 20K! I've learned so much from your channel using the MK3. Thank you sir!
Hi Jef! I just bought my Maschine Mk3 and I am learning a lot from your videos! Great job you are doing! thank you! :)
+WavebeatsMusic - Royalty Free Music perfect! Have fun with it!
Thank you man! 🙏 I took this afternoon to go completely through this video. I learned a crazy amount!!
Unbelievable tutorial. Opened up so many more possibilities with my music making. Thanks so much man!!
You’re welcome Kevin!
knowing that you can switch between Audio and Sample....worth the price of admission alone haha. have been planning all my samples around the limitations of either mode, now i can have my cake and eat it too.
This is so clearly communicated, thank you so much
Great stuff. You perform a great service for noobs like me.
the Best Tutorials on Maschine!!! Very useful
Man! You've just helped me out Big Time! Long-time MPC 2000XL user here. I needed this video. LOL
Right on! Glad it helped...
This explained sampling on the MK3 so easily and didn't skimp on the depth of the features available. THANK YOU!
great great videos jef, the best on youtube for maschine, super clear and informative. thanks!
Thanks Jef I've been looking for that mono switch for the past 3 days so frustrating but now I'm ready to go
Finally found a video that explained what I needed to know within the first 1:25...Thank you!
Again so clear so fun to watch!
Thaaaanks so much. Seriously your information about Midi Informationen for every single pad, was awesome always wanted to do that but didn't know how... Thanks for your work
Thank you Jeff for the tutorial
Thanks a lot for explanation, I was looking for a deep tutorial like this one.
OMG! just a big thank you to you, I finally just knew how to add my slices to the pads! Finally !
Your videos are awesome. Thanks so much for breaking down Maschine like you do. Very much appreciated.
Best guide I've watched
Thank you for taking the time to share your knowledge bro
I’m glad this is here. I have something to revert back to!
+Anthony Brown yeah! That’s the idea... thanks for commenting!
U just sold me on this. I'm a bedroom dj that wants to dabble with music production. I don't like the layout on ableton but Push looks interesting. I think i can work with the layout of Maschine. U made the Mk3 look easy. I've used NCH software to edit mixes on my phone and this is similar........... Yea, I think u sold me
You make it sound so simple and it is if you know it already
Alright i got it.sorry I'm an asshole
Thanks a lot ! This sent me to a new world !