seriously love the design of that gun, it really gives me some cool cyberpunkish vibes. We need more futuristic looking guns! Nice vid mate! And thank you for showing some stuff not usually seen in the airsoft-youtube world :)
Attention with the g&g quad stack mags! These have the side notch on a different height and will not be compatible! Still the maxx are not perfect for this builds as you noticed. Some made them work, many had issues. So I just recommend the Prowin for example (as you found out too 😅) Thank you for taking your time to review 🫡 Enjoy your little monster and be nice to your opponents 😂✌🏻
Video is really interesting and really complet Pricetag is a thing i understand but if you look it's in my opinion a solid options you have two configuration if you compare its with other airsoft 3d printed conversion marker like the protek atom and price is on the same high
i had to buy an 11.5mm OD inlet adapter for my maxx M4P when i built my 128mm airtac CRBN + ESG setup on an arp556 lower, seems the 11mm OD one that they ship with is far too small for most of these 3d printed housings and also G&G gearbox shells which causes that play and mega annoying alignment issues
The Arp9 3.0 (Quad Stack) do not have the notch. They have fake ones on both sides, that sit a lot lower than they'd need to be. Idk why they chose to do it that way, instead of just putting in a proper notch. Cutting one is easy though. Take the mag release out of the gun, put the mag in, mark where it lines up with the mag catch hole, and just cut the notch there. Pretty easy
@@Jaeger-Precision Could you take one for the team and order the short ones aswell? :P I really want to see if they will fit if you modify the buttom plate on the mag. And I can copperate what @thor_269 said. I got the clear mags, the notch in much lower, but it's super easy to modify to work. :)
@@hughjass1976i don't think so mk23 is really good. But its a massive gun and don't feel in all hand. Hadron came out with à slide for the bodyguard, you had option on the kjw mk1/mk2 and the aap01 if you don't care about sneaking
You know what will be very cool and absolutely great idea for thecman is to make a polarstar kythera type pistol Carbine bullpup
Great vid, your putting the money in and researching to let us know! we thank you!
seriously love the design of that gun, it really gives me some cool cyberpunkish vibes.
We need more futuristic looking guns!
Nice vid mate!
And thank you for showing some stuff not usually seen in the airsoft-youtube world :)
Attention with the g&g quad stack mags! These have the side notch on a different height and will not be compatible!
Still the maxx are not perfect for this builds as you noticed. Some made them work, many had issues. So I just recommend the Prowin for example (as you found out too 😅)
Thank you for taking your time to review 🫡
Enjoy your little monster and be nice to your opponents 😂✌🏻
With a small modification fits in nicely. Yes I should have taken your advice from the start.
You will love it. I absolutely love mine
LET'S GOOOOOO, HE IS BACK
Video is really interesting and really complet
Pricetag is a thing i understand but if you look it's in my opinion a solid options you have two configuration if you compare its with other airsoft 3d printed conversion marker like the protek atom and price is on the same high
It would be great if a CGS stock adapter is available
i had to buy an 11.5mm OD inlet adapter for my maxx M4P when i built my 128mm airtac CRBN + ESG setup on an arp556 lower, seems the 11mm OD one that they ship with is far too small for most of these 3d printed housings and also G&G gearbox shells which causes that play and mega annoying alignment issues
That always Jams, says other Mechanic for Replica's the tolerance on Max's Hop Unit 😢🎯
Is there a link to where we can find this? I definitely want to check this out.
The Arp9 3.0 (Quad Stack) do not have the notch. They have fake ones on both sides, that sit a lot lower than they'd need to be. Idk why they chose to do it that way, instead of just putting in a proper notch.
Cutting one is easy though. Take the mag release out of the gun, put the mag in, mark where it lines up with the mag catch hole, and just cut the notch there. Pretty easy
Appreciate the heads up and tip on modifying. Ive ordered one to try
@@Jaeger-Precision Could you take one for the team and order the short ones aswell? :P I really want to see if they will fit if you modify the buttom plate on the mag. And I can copperate what @thor_269 said. I got the clear mags, the notch in much lower, but it's super easy to modify to work. :)
@@dWinth3r I didn't have my mags at the time, but putting the short mag next to a PTS, it looks like it might just about fit
@@thor_269 yahr, Im going to risk it, when I see some of the small, see through, mags in stock in europe.
I have tested measurements for the short quad stacks and they are really short, will disappear inside the body.
the newer maxx, after the me seems to be pretty bad. mine me pro is great but it has some issues innitially
For that price I can buy a decent printer and print one myself.
perfect sniper side arm how do i get one
No no my friend, no gun has yet knocked the mk23 off that perch
@@hughjass1976i don't think so mk23 is really good. But its a massive gun and don't feel in all hand. Hadron came out with à slide for the bodyguard, you had option on the kjw mk1/mk2 and the aap01 if you don't care about sneaking