@@RetroSho quick heads up btw, i have a v1.04 just out now because noticed some changes that EZ-Flash made to the filesystem driver and for Goodboy Galaxy. Not a particularly huge update but some would get a kick out of it. thanks for the great video!
@@Sterophonick You’re very welcome!! And cool! It’s been a while since I’ve taken a look at the EZ Flash myself, so I’ll have to prepare another SD card this weekend and check it out! Hopefully this video can still hold up for everyone. 👀
Got my EZFlash this morning and this guide had me up and running in like 10 minutes. Thank you so much, you seriously don't understand what it means to me to be able to relive my gameboy days 😭💖
Man I've been looking for an in-depth installation video specifically for setting up a new cart with the SimpleDE theme for DAYS! Great video, thanks for going slow and explaining it all clearly :)
Is there anything like this for the ezflash junior ? Awesome video bro this has brought me a new sense of enjoyment with the omega de I had 0 idea the theme was this ez
A few things I missed in this video: 1) If you have obtained a large collection of ROM files from the net, unzip them to your PC FIRST, then transfer them over to your SD card. The EZ-Flash Team also has the file system set up so that it cannot locate files that have the "read-only" attribute associated with them, so also check for this. 2) The saves are saved to the carts FRAM, which means it does not use a save battery like other carts. The battery that is installed is solely for the RTC (Real Time Clock). The battery type is CR1025 and can be found here: www.amazon.com/Panasonic-Batteries-CR1025-Lithium-Battery/dp/B002E3QXMU/ref=sr_1_18?keywords=cr1025+battery&qid=1649490697&sr=8-18 3) If you have trouble saving .GB games, try renaming the extention as .GBC and playing the game this way. Does not work for all games. Thanks to elia_rampage for finding this fix! 4) If you'd like to use the ZX Spectrum Core, with it loaded, press L + R + START + SELECT to access Pogoshell. From here you can turn on the Virtual Keyboard by going down to "Control". The keyboard functions will vary from game to game, so try as much as possible to play games which make use of the joysticks (DPad) as much as possible. 5) The Definitive Edition works with the Analogue Pocket, but sometimes the emulators will crash if left idle. 6) Save States via the Analogue Pocket work for both GBA games as well as all emulated games. 7) Game hacks may or may not work if flashed to the NOR. If they do not work, they will hang on uploading to the NOR. Take caution and instead run them normally from the SD card (Confirmed by Allemand Instable).
can someone please make a program that makes making cheat files easy. for stuff like rom hacks needs to be compatible with how ever SimpleDE uses cheats
Just wanted to share incase anyone else having GBC save issues. Rather than shutting off gba or exiting from menu, after saving in game like normal, press L+R, scroll down and select Restart so the save will commit -- go through the game's usual startup intro to the file select screen to make sure it saved properly-- Then power off the GBA completely. Saves have worked as long as I restarted from the menu first before shutting off. Forgot where I read it so shout out to whoever figured it out.
Thanks brother! I just got mine in the mail and with the help of your tutorial I was able to get it running just fine in a matter of minutes. (Not gonna lie I didnt have a clue what I was doing)
Thanks dude this was so helpful to get started with DE I just got, was worried about it not being worth it but those fears are put to rest, this thing is fantastic!
@@RetroSho Looking to get into a lot of fun stuff with this once I know what I'm doing lol. I wanna make a couple simple homebrew games from scratch (stupid simple things like snake just to get started then make something more interesting). I also want to look at the open source code for the firmware, but I have zero clue how to go about beginning to understand that- I wanna figure it out though and possibly create a custom theme or just generally explore what else can be done. One idea I had was to create a basic typing application- and try and splice together a GBA adapter and a computer keyboard and see if I can get the GBA hardware to recognize keystrokes and reflect them properly. Tons of ideas I want to explore for the GBA, going to take my time though to make sure I understand things one at a time.
Haha, I'm on it then, brother! It's a very interesting and neat flash cart! The save states hold up decently well, and there are a few more emulators than the ED GBA. 😎
Great video. Everything works fine (was my second time doing this since my micro sd card I used originally got scratched and became unusable) however when I boot up games like the Pokémon games or GTA Advance using boot with addon, the game just won't boot up, can't even use the addon menu (this happened last time for me). All other games work fine though.
@@galaxycraft0075 Yo! That’s a shame the Pokémon games and GTA games don’t work with the addon. It’s possible it may be the chips on your cart itself. These carts were mass produced and the quality isn’t as on point as I would have expected liked to have seen.
Thank you x10.... I was not aware that pressing L or R would allow me to pan up and down when playing NES games in "unscaled" mode. I really hate to compromise with a stretched image unless absolutely necessary and so having this option means a lot to me.
You're very welcome! I'm the same way and hate compromising if I can avoid it. Ironically it does make some games a little more interesting, such as racing games and a few of the slower shooters. 🤔
Definitely! I initially thought this cart would be a poor substitute to the EverDrive GBA. Turns out its a few steps up from that cart, and it provides just a bit more functionality for a fraction of the cost of the GBA. I'm sure other people are aware, but knowing just how much more you can get out of it has always been a goal of mine with these videos. Hopefully you're finding these videos helpful in case you want to purchase one sometime down the line. 😎
@RetroSho is there a way to get back into the menu from the games once you have launched one? Seems like I can with gameboy or gameboy color games, but not with advance games.
@@tokin420nchokin Yo! You can do this! When you boot GBA games, select "Boot with Addon" as the boot option. Then when you are in game press L+R+START to go to the sub menu, then "RESET" to go back to the main menu. Make sure you save and wait 3-5 seconds before you reset to main menu! 😂😂
Video was very informative. Thank you ! Could use some clarity on where the folder of the roms goes, but after a few rewinds, the significance of its file location doesn't seem to be a matter.
I've followed your video and I cannot get the SGB borders to appear. After researching, I'm not alone. I'm using the GameCube GBA Player but did test on DS Lite too. I've used both the official firmware and the SimpleDE. I used the official GameBoy Player disc (ISO) and GBI, still nothing. Any thoughts?
I think the SGB borders might be just outside of the range for both of those devices. I've been thinking about how to respond to this one for a while, but it seems like it might just be the fact that the SGB "borders" were already truncated a bit from it's original size. Is it possible for you to test on a plain old GBA console to see if it's not a software issue?
So, I've never encountered this, but I have found a small Bootloader Recovery guide that the EZ Team has written up: www.ezflash.cn/zip/recovery-en.pdf Instead of downloading the recovery image in that guide, download this one for the DE: www.ezflash.cn/zip/de-recovery.zip Not sure if the guide will work, as it seems people have had mixed results. The team does mentiont to contact your seller for an RMA if the fix fails to work, however: gbatemp.net/threads/how-to-make-your-sd-card-to-ez-flash-omega-de-recovery-able.584611/ Hope this helps!
having a hard time getting the images to appear i put the folder into the systems one and then i added it by itself and still nothing not sure where i went wrong
The various demos and other things work fine, but any roms I put on myself aren't working. At first, it has a black loading screen, then the screen goes white, and doesn't do anything else. Does anyone know what's happening? Some of them are the same ROMs I've been using for years, so I know they work.
@@transqueen Ahh that’s a shame. As I’ve had to tell a few others, there has been a batch or two of flash carts that have had issues just in general. If I would have known I would have said something about it in my video. 😅
hey man i have a question. The in game saves don't work for me for GBC and GB. I put all of the backup and system folders along with the kernel. I have tried everything and I still am so frustrated that I can't get it working. Plz help me.
So the GBC and GB stuff may actually be broken on both the original and custom firmware. This is more of an issue with the JaGoomba emulator and not your cart. You can try to rename the .gb files as .gbc if it’s an original Pokémon game or original Game Boy game. Let me know if it works for you!
@@RetroSho no but for the gbc games like pokeon silver. I cannot save my game files on the custom firmware. On the original kernel however, it works. But I can't play certain Gameboy color games like pokemon crystal and a rom hack of wario land DX
@@aidn_0828 Hmm. Thank you for that information. I’ll update my list there with it. There won’t be a way to save if it doesn’t work on the custom firmware - the devs of the firmware or the emulator will have to fix.
Which map to put additional emulator's on ez-flash de ? I can download supported emu's but want to know which map and does it need to be separated from the roms or in same map ? Thank you
Hey can someone help me please? NES games dont seem to work. I can open them but ingame no buttons work... Sterophonick has uploaded some updated versions but it seems i made a mistake or it didnt work. Can someone help me please?
Please answer: i followed ur link to Download firmware 6 1.03 however after updating it says firmware 5 at the top instead of firmware 6, any reason why? i followed ur link to the site, it says firmware 6 but after updating and lookin at the top it says firmware 5 but in your video i notice yours says firmware 6, wondering why mine says 5.
You have Revision A of the PCB for the Omega DE. When you update the firmware for yours it will say firmware 5 instead of firmware 6. This is fine! This is a message from EZ's site: **"This kernel contains firmware 5 for Rev.A and firmware 6 for Rev.B. Rev.A users which already upgraded to kernel 3 and firmware 5 no need to download this version."** Just in case, you can check the back of your flash cart at the bottom and it should say "OMEGA DE" there in white. 😎
@@RetroSho yes i recently got my D.E. im just curious on why after following ur link to firmware 6 it shows as firmware 5 when i check the top right of the screen. Because on yours it says firmware 6. Your video is only 4 weeks old, where do u get firmware 6 from? also 1 more thing if u can help. I followed ur video to a tee. After i put the cbios_main_msx1.rom in the PLUG folder, then put the cartridge back in my pocket and updated. I followed your route where you clicked on BACKUP then SAVER and it showed a bunch of stuff. However after I clicked on BACKUP and SAVER its empty, theres nothing there? i followed every single step you did so im just super confused i wish i could face time you hahahaha
@@SVR2010REELS Haha! You did download firmware 6! I added the link to the direct file in the description. Just for you (and a few others), it will say 5. This is something I actually missed in my video. That's kinda weird that BACKUP and SAVER are both empty. Try to extract both folders onto the SD card again! The SAVER folder will be empty, but the BACKUP folder has files that need to be there.
@@RetroSho ok gotcha, yeah about the backup thing im still trying to figure this out let me try to tell you easier maybe that way you can see if maybe i missed something. at 6:35 in your video you click on BACKUP then you click on SAVER and a bunch of stuff shows up. However when i click on BACKUP then click on SAVER it's empty, nothing is there. What am i missing that i can see all those files like in your video?
@@SVR2010REELS I see what's going on! That's actually a pretty short edit I made there -- you shouldn't see anything in your BACKUP > SAVER Folder. I put all of my main ROM folders onto the root of the SD card. Should have made that transition a bit longer. You're not missing anything. 😅 Put your ROMs on the main root of your SD card and it will look similar.
Anybody also having issues with this cart on the GBA Consolizer? Works on GBA SP and GB Player via GameCube, but not GBA Consolizer. It’s a shame, Consolizer is the cleanest way imo to play GBA.
Bought Rev B of EZODE works perfectly in my GBA Consolizer! So happy! Avoid Rev A carts that have “OMEGA DE” inscribed on the back. Find a Rev B model that writes “EZODE” on the back of the cart. I’m guessing the newer FPGA chip works better with the Consolizer.
I installed the eng folder for the cheats but all the names of the codes show up as Chinese. Is there a way to fix this?? For certain games like Pokemon Emerald, fire red, and leaf green
So they entire folder for some games will show up in Chinese unfortunately. You can add your own cheats but it's a bit of a process: www.reddit.com/r/Gameboy/comments/hcq2g6/ezflash_omega_cheat_system_tutorial/
The RTC? The EZ Flash team has stated before that some backlit modded consoles will affect the clock crystal oscillator on the card and speed that up or cause it to stop. Is it possible you're using a modded console? It's also possible that your cart has a manufacturing defect -- the clock crystal may be poor and causing the timing to be off...
@@RetroSho I am using a Backlight GBA. I also read about the crystal oscillater getting wonky. The only solution I can think of is using a gba power cleaner to somehow make sure the frequency(?) Voltage(?) doesn't affect the cart. Edit: Just read not "also read"
@@omega-xis1943 Yeah, sounds like the a combination of both issues. I really do wonder if the power cleaner will help, but it might be a good idea for you to do it anyways. I would see about testing the cart in any unmodified GBA that you can find if you can.
I'm having difficulties bringing over my Pokemon Sapphire save despite following instructions. what are common issues new users face during this step? everything else has been clearer than other videos and I am content loading up games as new, but would rather continue pokemon from my midway point
@@RetroSho I think your video was actually what cleared up my misunderstanding! I saw DE and my brain was like "but I would like it in English not German" and made the choice to use the wrong version!
@@TheBinklemNetwork Haha! It happens! Glad it was sorted out! It really is a great cart with all of the hook ups. So long as it’s one that isn’t from a bad batch 😅
@@RetroSho thank you for the quick reply! Do you have any site suggestions to download Roms for it? (I’m completely new to this so any help is highly appreciated) I personally find it’s hard to find info on how to get specificity Roms for it
@@RetroSho GBA, I have to reformat the sd card and reinstall all the games again, I guess I'll try increasing the cluster size like you said see if that fixes the issue. Thanks.
@@antonioaguirre9949 Welcome! As much as I like this flash cart, it unfortunately has way too many issues like this that goes beyond the scope of what I said in the video. For me, I don't have any issues at all -- for others, they've had various ones, from SD card corruption to the cart failing after a short while. It's really a shame TBH. In retrospect, the quality control is pretty bad, and I hope they make a new revision before long.
Ive downloaded the correct kernel for DE version and i cant access the other tabs when it boots up ex: settings for the cart like the time and cheats on or off
Followed the instructions exactly but my GB, GBC, and GBA sections are all showing only 200-260 roms each out of several thousand that are on the card. They all seem towards the end of the list of games starting with the letter C. All games that start with A and B are present. I also have GG games on the card and all 500 are present. I'm using a 64 GB card. Any idea how to resolve this?
Hello!! So, this seems to be an issue with how the EZ-Flash team set up how the the files are located on the card. Try these things: 1) If you grabbed a ROM collection from online, unzip the files to your PC FIRST, then copy them over to the SD card. 2) Check files for any special characters. This cart doesn't like some of the accented characters some games may have. 3) Make sure none of the files have a read only attribute. 4) Ensure that you have a max of 512 files per folder. You may want to format the SD card with a cluster (allocation) size of 32KB or more from the jump if you want to have a fresh start of it. This seems to be a common issue amongst all of the newer EZ carts. i wish I caught it in time for the video. 🤔 gbatemp.net/threads/newly-added-roms-not-showing-up-on-ez-flash-omega.570485/post-9142351
@@ttsvc6638 It should be a max of 512 per folder for the DE! Which is something else I ALSO missed (likely done for those people who format as FAT32, which is a max of 512 in a folder anyways). Will have to stay on the ball next time. 😂
Thank you all for the advice and suggestions! The issue was resolved when I spread the files over multiple folders. It will not display any files exceeding exactly 257. I have that resolved and roms are all present I have another issue I'm hoping can be resolved. When running GBA roms the game fits to the screen with no black border present. However, on GB, GBC, and GG roms the display is very small has a black border encircling it rather then fitting to the screen. I'm not wanting to stretch the image, but rather to have it enlarged until it fills the edge of the screen on my Analogue Pocket. GG roms have a option to strech the screen but it caused glitchy images. GB and GBC have no options to enlarge it at all. Is there a way to adjust this?
@@jdwholman Ahh! Excellent that TTSVC 66's advice worked for ya! They are awesome! 😎 As for the display size this cannot be changed I'm afraid. This is because the emulator for GB & GBC was designed to be 1:1 to a real Game Boy -- it maintains that aspect ratio due to the target hardware being an original GBA (fits on screen, has the exact same issue with real Game Boy games being played on it). Best you can do is stretch the image displayed on the Pocket itself (take the height uo to 1440 from 1067, move Y Position to 0 from +186). I know you said you didn't want to stretch the image though. 😅
You can use an Analogue Pocket to install and use the EZ Flash Omega DE (You still need a PC regardless of what you wanna play on!). All of the footage you see here was from a docked Analogue Pocket. 😎
Ok, first off i love the video it help out alot, Second: how did you get your cheats to be in English all mine are in Chinese and i cant get then to b in english any tips and tricks for that?
So I took at that thumbnails pack while I was creating the video, and that pack didn't have all variants for every single game that might be available, which is a shame. There is a guide on how to create them for the Omega, but I'm unsure if they will also apply to the DE. Check it out here: gbatemp.net/threads/creating-your-own-thumbnails-for-the-ez-flash-omega-firmware.510210/
Sorry about the slow reply! Did you ever get these images working? You have to press the select button in the menu to display images. Then you can scroll over the ROM files to see them. They don't display for all games!
Yo! It's been a while, but it looks like this guide still holds up! Hasn't been any updates in a year since it seems. Just make sure you have the Definitive Edition (not the original flash cart) that's coming in. Also just to be aware that some people have had issues getting the custom firmware installed. This might be due to a bad batch of flash carts that have been sold about. Ensure that the first OEM update holds before attempting the custom firmware flash. Hope this helps!
Thank you that was helpful, much appreciated. I have the DE version coming i will see how I get on. It seems pretty straightforward. I like to watch the videos a few times before trying something lol, I modded my SP with a new IPS screen, usb c battery mod etc.. but only had 2 carts so I went for this flash cart.
@@King_Cantona7 That's whats up! That console set up sounds clean as hell! Espcially with USB-C battery mod & IPS screen. 🔥🔥 Would be interesting to hear back from ya on power consumption after you get all set up!
So this video is a literal god send thank you so much, but is there a way to add your own cheats? many of the included ones feel really weak and sometimes only in Chinese sadly
You're welcome!!! Unfortunately, the cheat system was the one thing I couldn't crack in a clean way. It's one of the most obnoxious, obtuse cheat systems I have ever seen, and I'm inclined to say it's not even worth the hassle. It's not a simple process at all, though you can add to it. Here's a guide if you are interested: gbatemp.net/threads/custom-cheat-lists-for-ez-flash-omega.591665/ I've known about the thread, but it goes so far outside the scope of the video, I had to cut it. 😐 Hope this helps!
Hey bro, I ordered the same EZ-FLASH Omega Flashcard recently as well as a brand new AGS-101 GBA SP. I followed your tutorial exactly (minus the emulators for other game consoles, I only needed GBA games) The card updates firmware perfectly when holding 'L', and the menu is perfectly functional. However, when I try to boot up any GBA game it just displays a white screen (for certain games it also makes that annoying crunching noise that occurs when you take out a GBA cart mid-game). I looked at a bunch of websites and forums online for an answer and they all led to the same conclusion of contacting the seller for a replacement cart as it's an apparent hardware issue within certain cards. Now, seeing as this cart is over $100 and thus SHOULD be made with good quality, I figured if anyone had an alternative solution to contacting the seller, I'd be you. So, what's your say? Haha.
What's good brother! Haha thanks! And congrats on the AGS-101! That definitely sounds like a similar issue that I've seen and read about, so everything was perfect on your end concerning the installation of the firmware. You could attempt to flash the base firmware only as well, but I'm gonna bet it'll have the same issues, so it is just better to RMA the device for a replacement or get your money back. Alternatively, if you have the means you could also test the cart by seeing if it would work in a plain old AGB-001. Would be interested either way in what you find out! Now! As far as an alternative solution, there IS one! Only... for a little bit more. You've heard of the EverDrive carts yeah? This would be the EverDrive GBA -X5- Mini. Overall, this GBA flash cart is much better built than both the EZ Flash Omega as well as the DE. There are a few less functions that the cart has -- the EverDrive GBA doesn't support cheats or save states like the Omega DE. It also supports far less emulated consoles as well (Has only, GB, GBC, NES, GG, and SMS). However, since you mentioned you only wanted the Omega DE for GBA games, that one fact could be over looked. 🤔 I did a video on the EverDrive around the same time as this one if you want to take a look at it! If you're interested, don't pay over 150 for one, as the cart itself usually sells for 110-120 direct from the maker Krikzz (before tax and shipping). Let me know if this helps!
@@RetroSho Hello again! Thanks for the really quick reply. Yes, see I actually owned an AGS-001 model prior to buying the EZ-FLASH Omega, but it's old, like SUPER old (basically when it first came out). As we all know that model has non-backlit screen, which looking at it now as opposed to my 4-year-old self, it's noticeably bad lmao. That paired with the depleted battery over the years, as well as general wear from my careless past-self made me decide to get a new one for one of these carts. The AGS-101 took like a month to get here, but the card didn't take long, so I tested it on the AGS-001 in the meantime. I watched someone else's half-assed video rather than yours about how to set it up (your video here was WAY better at explaining it by the way). Testing it on the AGS-001 yielded the same results as the AGS-101, so at the time I thought it just had to do with my AGS-001 being old. But even after updating the EZ-FLASH as shown in your video it doesn't work on either console. I've reached out to my seller and am waiting for a reply about getting my money back, luckily, I kept the box and all that. In terms of getting a different cart, I like your suggestion of the Everdrive GBA Mini. I've found your video on that cart and the setup seems relatively the same, obviously there's not a huge deal of emulation on that cart, but again, I only really care about GBA anyway. I've looked at the maker Krikzz's website and it's currently selling for $104 which is pretty much the same I paid for the EZ-FLASH Omega, hopefully if I get my money back, I can use that money to get that cart instead. Thanks so much for your help, bro, and if it isn't too much trouble could you just confirm that the Krikzz website for the Everdrive GBA Mini is the correct one, as well as your video on the Everdrive GBA Mini/X5. These links are shown below. Thanks again man! Krikzz's Everdrive GBA Mini purchase page: krikzz.com/our-products/cartridges/everdrive-gba-mini.html Your video on the Everdrive GBA Mini/X5: czcams.com/video/EPX9hk2wuZ0/video.html
Hey! I know this comment is a year old but did you ever figure this out? I was having the same problem and it turned out my macOS was creating temporary versions of all the files on my sd card and I was getting the white screen because I was accidentally trying to load the temp file instead of the actual gba file
@@sbi705 Damn, never thought this comment would ever get a reply, literally forgot all about this haha. Short answer - No. I tried literally everything imaginable, but it never seemed to work, I even sent the card back TWICE and still the same issue persisted on all three cards. So, at that point I just sacked it off and got a refund. I just came to the conclusion that these cards aren’t made like they used to be, and they just simply don’t work anymore, and the company doesn’t really care, which would normally really anger me, but seeing as the location of the EZ-FLASH cart production company is situated in Ukraine according to their website and return address, I don’t think troubleshooting a GBA cart is the top priority on their list to be completely honest. But can I just say, this is a STARK contrast to the R4 cards for the DS I have purchased for myself and others over the years which have worked absolutely flawlessly every single time, a couple of which have lasted well over ten years now and have had absolutely no issues whatsoever, now that’s how you make quality R4 cards. In terms of your suggestion though, I’ve checked back on the roms on both my PC and SD card, and they’re definitely GBA files, so yeah, it was definitely the card. Thanks for checking in though boss, and thanks for trying to help me out with your suggestion. Not many people in this world would look at a year-old comment and think to do so haha.
@@AllemandInstable That’s not normal at all. I’m wondering if those games you’re getting have the correct header on them. It should be loading pretty fast to the NOR 🤔
@@RetroSho it's a pokemon rom hack, I had to shut down the console it was 20min in and 0mb written to nor still i hope shutting down when writing doesnt damage it, I had no other solution i can try with a regular rom though ( original )
@@AllemandInstable Yeah! Becareful of the rom hacks to the NOR if they have large file sizes! They use tricks to get them to work on normal emulators, so getting them to work on a flash card might be iffy 🤔
@@RetroSho SanDisk I think I figured it out for some reason it changed itself back to read only so I'm going to try to edit the folder from my PC instead of the card.
@@RetroSho gba sp yea it got to download the kernel both versions the ex flash website one and then the easy layout one. Neither play games but just booting them I just get a white screen
@@josephjoestar5444 Did you get it recently bro? Looks like it's a hardware issue (not your fault). I found a very similar issue here with the original Omega: gbatemp.net/threads/omega-ez-flash-white-screen-after-clean-boot.509485/ EZ Team recommends you get a replacement looks like.
@@codyman630 Depends on the game and dump method, but it should be possible. It would only be for GBA games. In this case you would need a hardware dumper like Sanni. That save file would then be able to be moved to the EZ Flash. You could also move the save file from the Sanni and “flash” the OG game in the reverse way. Watch a video on the Sanni Dumper to be sure if it would be for you! Another way to do it would be to use an Analogue Pocket - you could play the game, capture the save state in Memories, then reload that Memories using the ROM with EZ Flash. You’d then save the game normally so it’s stored as a save file. The reverse is also true - play the game with EZ Flash, save into Memories as a save state, run the OG cart in the Pocket, reload its corresponding Memories, then save the game normally onto the OG cart.
@@RetroSho awesome! I'll definitely look into it. I have a rom save file on my phone and can easily send the file to my computer. But I'll have to look into the Sanni hardware dumper for sure.
You can update the old EZ Card, but it's a different firmware download and slightly different update process. Head here: gbatemp.net/threads/new-theme-for-ez-flash-omega.520665/ You'll want the download to the left (Simple.zip).
Sure! So given the functionality of the Mode B, you're essentially allowed to treat the flash cart as if it is a "OEM game" -- the flash cart for all intents and purposes a "real" Gen III Pokemon game. In the settings menu, set the Mode B setting to "Cart" (in the OEM firmware this will be called "LINK"; make sure you also OK the changes) first, then move over a Gen III Pokemon game to the NORFlash. You can now play the Gen III game to a desired point of your choosing. Make sure you are pressing L + R + START and saving your game data every so often. This will create a back up of the game's data from the FRAM to the SAVER folder for you. Once you're good with your Gen III game, make a final back up, then power off the game and set the physical switch to "B" after this. This will force the flash cart to load the first game in the NORFlash immediately as if it's a real cart (until you toggle the physical switch back to "A"). From here, you can play your Gen IV game of choice, get access to Pal Park. Then once you are ready, plug the Gen IV game and the EZ Flash (With both Mode B settings still set) into your Nintendo DS, and you'll be able to transfer over your Pokemon as normal. If any issues arise, you can toggle the physical switch back to "A" and load your previous save up to the NORFlash. Before you attempt this, make sure you're practicing saving and loading the saves from memory until you understand how the feature works. Hope this helps! 😎👌🏿
@@ray2dee88 It's pretty interesting. Very difficult to find some of the better GBA games without paying up on eBay now. That or having some luck finding em in the wild at a garage sale.
You can add cheats from the menu before you start the game. Select the game, then scroll down to "Cheat(0)". You can them add cheats that way. Then after the cheats are enabled, select "Boot With Addon". Fair warning, some cheats are in Chinese... you can add cheats yourself too, but it's a complicated process: www.reddit.com/r/Gameboy/comments/hcq2g6/ezflash_omega_cheat_system_tutorial/
Oh damn! You might wanna test with another SD card in case. Use a larger cluster size. If this doesn’t work you may have issues with the cart itself and will need to have it replaced. 🤔
@@RetroSho i was reading the comments and i saw that you said this to another user as well lol i have a 32 GB that I just bought so maybe i need to purchase one with a larger cluster size? :)
@@tswishhh Ahh! Well you can change that cluster size during formatting! As stated in the video for 32GB and up you’ll want to select a cluster size of 128KB (It’s what I used. There’s a drop down menu to select this when you do a “quick format”on Windows). Unfortunately, it’s not an exact science and these flash carts are very finicky when it comes to storing data. In your case, I would totally recommend borrowing an SD card if you can! I’d rather not see you spend more money on a larger SD card, only for the same issue to crop up. 😅
@@RetroSho Nice thank you, these are super organized. I also found “no intro” packs which have all the official/beta/protos/all regions/translations, but not organized in that SmokeMonster folder structure. They are also regularly updated by LongAccordian.
@@ttsvc6638 Welcome! No-Intro is a great back for historical purposes but a good deal of the ROMs aren’t verified, which is how the SM pack originally came about! HTGDB seems to continue that legacy since SM packs are no longer maintained. 🤔
@@RetroSho Good to know. All of the no intro roms I’ve tried so far worked. I always thought you needed to run that Python SM app to get that folder structure or manually do it.
@@ttsvc6638 Yeah you have to run that python script to have it verify (by CRC32) and then it’ll sort it by region, type and proto/etc. Each game was painstakingly verified to be good dumps, which is insane. 😂
After installing the original updated kernel it brings me to the sd card page which shows me ezkernelnew.bin but when I press L or R it does not change pages did I do something wrong?
Hello! You did absolutely nothing wrong at all! I'll ask ya a bunch of questions: Does it show that the clock is running on the SD Card page? if so, did you try to reset the cart? What type of SD card did you use? And what is the formatting type? What I have seen (and unfortunately did not get to mention) is that there have been a few batches of carts that have been defective in various ways. Not your fault at all or the fault of the OEM or custom firmwares that you can load up onto these. I really hope EZ Team does a better QC check on their future cart releases.
cheers mate lol
Cheers homie! Thanks for such a great firmware! 🔥 😎
@@RetroSho quick heads up btw, i have a v1.04 just out now because noticed some changes that EZ-Flash made to the filesystem driver and for Goodboy Galaxy. Not a particularly huge update but some would get a kick out of it.
thanks for the great video!
@@Sterophonick You’re very welcome!! And cool!
It’s been a while since I’ve taken a look at the EZ Flash myself, so I’ll have to prepare another SD card this weekend and check it out! Hopefully this video can still hold up for everyone. 👀
Got my EZFlash this morning and this guide had me up and running in like 10 minutes. Thank you so much, you seriously don't understand what it means to me to be able to relive my gameboy days 😭💖
You're welcome, brother! Glad you could enjoy it! Now ya gotta get down to playing a ton of Game Boy and GBA games, haha! 😂😎
One year later. Which titles have you had on heavy rotation?
Man I've been looking for an in-depth installation video specifically for setting up a new cart with the SimpleDE theme for DAYS! Great video, thanks for going slow and explaining it all clearly :)
You’re very welcome! Glad I could be of service to you in some
Small way! Enjoy 😎
Is there anything like this for the ezflash junior ? Awesome video bro this has brought me a new sense of enjoyment with the omega de I had 0 idea the theme was this ez
A few things I missed in this video:
1) If you have obtained a large collection of ROM files from the net, unzip them to your PC FIRST, then transfer them over to your SD card. The EZ-Flash Team also has the file system set up so that it cannot locate files that have the "read-only" attribute associated with them, so also check for this.
2) The saves are saved to the carts FRAM, which means it does not use a save battery like other carts. The battery that is installed is solely for the RTC (Real Time Clock). The battery type is CR1025 and can be found here:
www.amazon.com/Panasonic-Batteries-CR1025-Lithium-Battery/dp/B002E3QXMU/ref=sr_1_18?keywords=cr1025+battery&qid=1649490697&sr=8-18
3) If you have trouble saving .GB games, try renaming the extention as .GBC and playing the game this way. Does not work for all games. Thanks to elia_rampage for finding this fix!
4) If you'd like to use the ZX Spectrum Core, with it loaded, press L + R + START + SELECT to access Pogoshell. From here you can turn on the Virtual Keyboard by going down to "Control". The keyboard functions will vary from game to game, so try as much as possible to play games which make use of the joysticks (DPad) as much as possible.
5) The Definitive Edition works with the Analogue Pocket, but sometimes the emulators will crash if left idle.
6) Save States via the Analogue Pocket work for both GBA games as well as all emulated games.
7) Game hacks may or may not work if flashed to the NOR. If they do not work, they will hang on uploading to the NOR. Take caution and instead run them normally from the SD card (Confirmed by Allemand Instable).
can someone please make a program that makes making cheat files easy. for stuff like rom hacks needs to be compatible with how ever SimpleDE uses cheats
Just wanted to share incase anyone else having GBC save issues. Rather than shutting off gba or exiting from menu, after saving in game like normal, press L+R, scroll down and select Restart so the save will commit -- go through the game's usual startup intro to the file select screen to make sure it saved properly-- Then power off the GBA completely. Saves have worked as long as I restarted from the menu first before shutting off. Forgot where I read it so shout out to whoever figured it out.
Never thought Bootsy Collins would be helping me update my ez flash
Haha! Thanks for the compliment! 😂
This is the most important video on the internet in my opinion
Haha!! I appreciate that!
Thanks brother! I just got mine in the mail and with the help of your tutorial I was able to get it running just fine in a matter of minutes.
(Not gonna lie I didnt have a clue what I was doing)
You're welcome brother! I hope you enjoy it! 😎I've been getting a ton of use and fun out of mine since!
Thanks dude this was so helpful to get started with DE I just got, was worried about it not being worth it but those fears are put to rest, this thing is fantastic!
Word! You’re very welcome! 😎. Enjoy your EZ Flash! The device is very worth it as long as it didn’t come from that one bad batch of them! 🔥
@@RetroSho Looking to get into a lot of fun stuff with this once I know what I'm doing lol. I wanna make a couple simple homebrew games from scratch (stupid simple things like snake just to get started then make something more interesting). I also want to look at the open source code for the firmware, but I have zero clue how to go about beginning to understand that- I wanna figure it out though and possibly create a custom theme or just generally explore what else can be done. One idea I had was to create a basic typing application- and try and splice together a GBA adapter and a computer keyboard and see if I can get the GBA hardware to recognize keystrokes and reflect them properly. Tons of ideas I want to explore for the GBA, going to take my time though to make sure I understand things one at a time.
Dude, what good timing! I literally got one of these at the beginning of the month. The rumble is freaking awesome!
Haha, I'm on it then, brother! It's a very interesting and neat flash cart! The save states hold up decently well, and there are a few more emulators than the ED GBA. 😎
Great video. Everything works fine (was my second time doing this since my micro sd card I used originally got scratched and became unusable) however when I boot up games like the Pokémon games or GTA Advance using boot with addon, the game just won't boot up, can't even use the addon menu (this happened last time for me). All other games work fine though.
@@galaxycraft0075 Yo! That’s a shame the Pokémon games and GTA games don’t work with the addon.
It’s possible it may be the chips on your cart itself. These carts were mass produced and the quality isn’t as on point as I would have expected liked to have seen.
@@RetroSho I'll look about for a fix
Well, my friend, thank you! This got me on my way super easily.
You're very welcome Jenison!!! Enjoy! 😎
Thanks Sho, video coming in clutch. Real retro community service here.
Yessir you're welcome brother! We aim to please here my man! Will be dropping more in the future! 😎
Thanks so much! i followed all instructions and it went seamlessly! very well written instructions!
You’re very welcome!!! Enjoy! 😎
Thank you x10.... I was not aware that pressing L or R would allow me to pan up and down when playing NES games in "unscaled" mode. I really hate to compromise with a stretched image unless absolutely necessary and so having this option means a lot to me.
You're very welcome! I'm the same way and hate compromising if I can avoid it. Ironically it does make some games a little more interesting, such as racing games and a few of the slower shooters. 🤔
I find learning about flash carts fun and interesting. Also, good to know the pros and cons of what you're getting into.
Definitely! I initially thought this cart would be a poor substitute to the EverDrive GBA. Turns out its a few steps up from that cart, and it provides just a bit more functionality for a fraction of the cost of the GBA. I'm sure other people are aware, but knowing just how much more you can get out of it has always been a goal of mine with these videos. Hopefully you're finding these videos helpful in case you want to purchase one sometime down the line. 😎
Is it true the this cart has a shorter battery life than EverDrive? Trying to figure out which to purchase
Great professionally made video man, kudos 👍
Thank you so much my man! Much appreciated!!! 😎
Hey thanks so much man I just did it at work while it was busy 😂
Hahah! Welcome my man! Glad the video could be of help to ya! Don't get in trouble though! 😂😂😂
Bro, thanks this is what I needed.
@@tokin420nchokin You’re welcome brother! Enjoy!!$
@RetroSho is there a way to get back into the menu from the games once you have launched one? Seems like I can with gameboy or gameboy color games, but not with advance games.
@@tokin420nchokin Yo! You can do this!
When you boot GBA games, select "Boot with Addon" as the boot option. Then when you are in game press L+R+START to go to the sub menu, then "RESET" to go back to the main menu.
Make sure you save and wait 3-5 seconds before you reset to main menu! 😂😂
@RetroSho appreciate it. Yah I had sorted it out before the reply
@@tokin420nchokin Hah! All good 😎
You should have more subs this was great
Much appreciated Bike! Its very humbling to hear that. 🙏🏿
thanks bro, quick and easy tutorial :)
Welcome Shiny! Glad you enjoyed it!! Have fun! 😎
Video was very informative. Thank you !
Could use some clarity on where the folder of the roms goes, but after a few rewinds, the significance of its file location doesn't seem to be a matter.
Heya! Thanks for watching, and thanks for the advice! I’ll be more clear on where ROMs go from here on out. 😎
Did you download all of those roms in bulk, if so where?
I had these ROM sets over the years. Search "HTGDB". on Google.
All of the games I've tried tell me "Save Failed" or something to that accord whenever I try to use the in-game save. Any idea what's going on?
hell yeah! thank you!
Awww yeah! Welcome! 😎
I've followed your video and I cannot get the SGB borders to appear. After researching, I'm not alone. I'm using the GameCube GBA Player but did test on DS Lite too. I've used both the official firmware and the SimpleDE. I used the official GameBoy Player disc (ISO) and GBI, still nothing. Any thoughts?
I think the SGB borders might be just outside of the range for both of those devices. I've been thinking about how to respond to this one for a while, but it seems like it might just be the fact that the SGB "borders" were already truncated a bit from it's original size. Is it possible for you to test on a plain old GBA console to see if it's not a software issue?
my ez flash consistently boots into safe mode stating that there are no loaders found...have you encountered this?
So, I've never encountered this, but I have found a small Bootloader Recovery guide that the EZ Team has written up: www.ezflash.cn/zip/recovery-en.pdf
Instead of downloading the recovery image in that guide, download this one for the DE: www.ezflash.cn/zip/de-recovery.zip
Not sure if the guide will work, as it seems people have had mixed results. The team does mentiont to contact your seller for an RMA if the fix fails to work, however: gbatemp.net/threads/how-to-make-your-sd-card-to-ez-flash-omega-de-recovery-able.584611/
Hope this helps!
Tried multiple sd cards and always get ez flash micro sd initial error upon booting up my gba
Sounds like you got a faulty flash cart. If I were you, I would return that one and have them send you a new one. Sorry about that! 😩
@@RetroSho lol sounds about right. Thank you for the reply 😊
@@Nodm8 Welcome! Unfortunately, these EZ flash carts can be finicky. 🤨
having a hard time getting the images to appear i put the folder into the systems one and then i added it by itself and still nothing not sure where i went wrong
Hello! Did you ever manage to solve this issue?
The various demos and other things work fine, but any roms I put on myself aren't working. At first, it has a black loading screen, then the screen goes white, and doesn't do anything else. Does anyone know what's happening? Some of them are the same ROMs I've been using for years, so I know they work.
Hello! Did you ever get your games working?
@RetroSho
I did not. However, I just returned my EZ flash.
@@transqueen Ahh that’s a shame. As I’ve had to tell a few others, there has been a batch or two of flash carts that have had issues just in general.
If I would have known I would have said something about it in my video. 😅
hey man i have a question. The in game saves don't work for me for GBC and GB. I put all of the backup and system folders along with the kernel. I have tried everything and I still am so frustrated that I can't get it working. Plz help me.
So the GBC and GB stuff may actually be broken on both the original and custom firmware. This is more of an issue with the JaGoomba emulator and not your cart. You can try to rename the .gb files as .gbc if it’s an original Pokémon game or original Game Boy game. Let me know if it works for you!
@@RetroSho no but for the gbc games like pokeon silver. I cannot save my game files on the custom firmware. On the original kernel however, it works. But I can't play certain Gameboy color games like pokemon crystal and a rom hack of wario land DX
@@aidn_0828 Hmm. Thank you for that information. I’ll update my list there with it. There won’t be a way to save if it doesn’t work on the custom firmware - the devs of the firmware or the emulator will have to fix.
@@RetroSho I see. Thank you for your time!
@@aidn_0828 You’re very welcome my man 😎
Which map to put additional emulator's on ez-flash de ? I can download supported emu's but want to know which map and does it need to be separated from the roms or in same map ? Thank you
Not sure what you mean by "map", but you should put the emulators in the "PLUG" folder. Make sure you follow the directions on the video closely!
Hey can someone help me please? NES games dont seem to work. I can open them but ingame no buttons work... Sterophonick has uploaded some updated versions but it seems i made a mistake or it didnt work. Can someone help me please?
Can you explain to me why pokemon red won't save? I have this flash cart and it just flat won't save for red..
Yo! Its a common issue with Jagoomba/Goomba Color. Try renaaming the ROM's extension from .GB to .GBC and see if that helps.
I am not getting the menu with all the added emulators after following the steps religiously up to 6:46.
HELP
Yo! What are you seeing?
@@RetroSho were those folders you added? Is that structure supposed to populate by itself?
Please answer: i followed ur link to Download firmware 6 1.03 however after updating it says firmware 5 at the top instead of firmware 6, any reason why? i followed ur link to the site, it says firmware 6 but after updating and lookin at the top it says firmware 5 but in your video i notice yours says firmware 6, wondering why mine says 5.
You have Revision A of the PCB for the Omega DE. When you update the firmware for yours it will say firmware 5 instead of firmware 6. This is fine! This is a message from EZ's site: **"This kernel contains firmware 5 for Rev.A and firmware 6 for Rev.B. Rev.A users which already upgraded to kernel 3 and firmware 5 no need to download this version."**
Just in case, you can check the back of your flash cart at the bottom and it should say "OMEGA DE" there in white. 😎
@@RetroSho yes i recently got my D.E. im just curious on why after following ur link to firmware 6 it shows as firmware 5 when i check the top right of the screen. Because on yours it says firmware 6. Your video is only 4 weeks old, where do u get firmware 6 from?
also 1 more thing if u can help. I followed ur video to a tee. After i put the cbios_main_msx1.rom in the PLUG folder, then put the cartridge back in my pocket and updated. I followed your route where you clicked on BACKUP then SAVER and it showed a bunch of stuff. However after I clicked on BACKUP and SAVER its empty, theres nothing there? i followed every single step you did so im just super confused i wish i could face time you hahahaha
@@SVR2010REELS Haha! You did download firmware 6! I added the link to the direct file in the description. Just for you (and a few others), it will say 5. This is something I actually missed in my video.
That's kinda weird that BACKUP and SAVER are both empty. Try to extract both folders onto the SD card again! The SAVER folder will be empty, but the BACKUP folder has files that need to be there.
@@RetroSho ok gotcha, yeah about the backup thing im still trying to figure this out let me try to tell you easier maybe that way you can see if maybe i missed something. at 6:35 in your video you click on BACKUP then you click on SAVER and a bunch of stuff shows up. However when i click on BACKUP then click on SAVER it's empty, nothing is there. What am i missing that i can see all those files like in your video?
@@SVR2010REELS I see what's going on! That's actually a pretty short edit I made there -- you shouldn't see anything in your BACKUP > SAVER Folder. I put all of my main ROM folders onto the root of the SD card. Should have made that transition a bit longer. You're not missing anything. 😅 Put your ROMs on the main root of your SD card and it will look similar.
Love this video
Appreciate it brother!! Hope you find the future content as interesting! 🔥🔥😎
Anybody also having issues with this cart on the GBA Consolizer? Works on GBA SP and GB Player via GameCube, but not GBA Consolizer. It’s a shame, Consolizer is the cleanest way imo to play GBA.
Bought Rev B of EZODE works perfectly in my GBA Consolizer! So happy!
Avoid Rev A carts that have “OMEGA DE” inscribed on the back. Find a Rev B model that writes “EZODE” on the back of the cart. I’m guessing the newer FPGA chip works better with the Consolizer.
I installed the eng folder for the cheats but all the names of the codes show up as Chinese. Is there a way to fix this?? For certain games like Pokemon Emerald, fire red, and leaf green
So they entire folder for some games will show up in Chinese unfortunately. You can add your own cheats but it's a bit of a process: www.reddit.com/r/Gameboy/comments/hcq2g6/ezflash_omega_cheat_system_tutorial/
@@RetroSho thanks
For some reason my clock speed is sped up to like 1.5 seconds ever second. Do you know what could be the cause of this?
The RTC? The EZ Flash team has stated before that some backlit modded consoles will affect the clock crystal oscillator on the card and speed that up or cause it to stop. Is it possible you're using a modded console? It's also possible that your cart has a manufacturing defect -- the clock crystal may be poor and causing the timing to be off...
@@RetroSho I am using a Backlight GBA. I also read about the crystal oscillater getting wonky. The only solution I can think of is using a gba power cleaner to somehow make sure the frequency(?) Voltage(?) doesn't affect the cart.
Edit: Just read not "also read"
@@omega-xis1943 Yeah, sounds like the a combination of both issues. I really do wonder if the power cleaner will help, but it might be a good idea for you to do it anyways. I would see about testing the cart in any unmodified GBA that you can find if you can.
I'm having difficulties bringing over my Pokemon Sapphire save despite following instructions. what are common issues new users face during this step? everything else has been clearer than other videos and I am content loading up games as new, but would rather continue pokemon from my midway point
after some testing, it seems games do not actually save to the drive. perhaps this is still user error?
i was not using the proper version of Simple. I needed to use the DE version.
I had no idea you were using the wrong version of Simple. I'll have to do better to clarify on these videos! Apologies!
@@RetroSho I think your video was actually what cleared up my misunderstanding! I saw DE and my brain was like "but I would like it in English not German" and made the choice to use the wrong version!
@@TheBinklemNetwork Haha! It happens! Glad it was sorted out! It really is a great cart with all of the hook ups. So long as it’s one that isn’t from a bad batch 😅
Are you using the SD card that originally came with the EZ Flash or do you need to by a new sd card for it?
I got a new card for it. I don’t trust those unbranded cards at all.
@@RetroSho thank you for the quick reply! Do you have any site suggestions to download Roms for it? (I’m completely new to this so any help is highly appreciated) I personally find it’s hard to find info on how to get specificity Roms for it
@@RetroSho I really appreciate the quick replies and also for you making this video, you have helped many people!🙏
@@R9TR0 haha please! One of those two definitely got what ya need 😎
@@R9TR0 Appreciate that brother! Glad it was helpful to you all 😎 🙏🏿
I don’t understand where to find the emulators from the SimpleDE theme
The emulators are bundled within the SimpleDE themes pack.
does this really work with pokemon emerald's RTC? i heard it has problems with the RTC.
Heya! I missed this message! It does work with RTC, but it’s a bit buggy and may require a fix to the ROM to get it working. 🤔
After some time the I get a save file corrupt error and can't boot certain games. Does anyone have this problem?
Which game is it? GBA? GB? It does tend to happen on some SD cards. You'll want to increase the cluster size of the cards format to reduce the issue.
@@RetroSho GBA, I have to reformat the sd card and reinstall all the games again, I guess I'll try increasing the cluster size like you said see if that fixes the issue. Thanks.
@@antonioaguirre9949 Welcome! As much as I like this flash cart, it unfortunately has way too many issues like this that goes beyond the scope of what I said in the video.
For me, I don't have any issues at all -- for others, they've had various ones, from SD card corruption to the cart failing after a short while. It's really a shame TBH. In retrospect, the quality control is pretty bad, and I hope they make a new revision before long.
Ive downloaded the correct kernel for DE version and i cant access the other tabs when it boots up ex: settings for the cart like the time and cheats on or off
It sounds like your cart might be defective. Did you ever get to resolve this issue?
@@RetroSho ive returned it and hopefully i get a new cart
@@bryanalonso7978 Yes I hope so too! Unfortunately EZ Flash Omega DE has a somewhat higher defect rate over the GBA EverDrive 🤔
Followed the instructions exactly but my GB, GBC, and GBA sections are all showing only 200-260 roms each out of several thousand that are on the card. They all seem towards the end of the list of games starting with the letter C. All games that start with A and B are present. I also have GG games on the card and all 500 are present. I'm using a 64 GB card. Any idea how to resolve this?
Hello!! So, this seems to be an issue with how the EZ-Flash team set up how the the files are located on the card. Try these things:
1) If you grabbed a ROM collection from online, unzip the files to your PC FIRST, then copy them over to the SD card.
2) Check files for any special characters. This cart doesn't like some of the accented characters some games may have.
3) Make sure none of the files have a read only attribute.
4) Ensure that you have a max of 512 files per folder.
You may want to format the SD card with a cluster (allocation) size of 32KB or more from the jump if you want to have a fresh start of it.
This seems to be a common issue amongst all of the newer EZ carts. i wish I caught it in time for the video. 🤔
gbatemp.net/threads/newly-added-roms-not-showing-up-on-ez-flash-omega.570485/post-9142351
@@RetroSho I saw another tutorial that mentioned it’s capped to 256 files per folder.
@@ttsvc6638 It should be a max of 512 per folder for the DE! Which is something else I ALSO missed (likely done for those people who format as FAT32, which is a max of 512 in a folder anyways). Will have to stay on the ball next time. 😂
Thank you all for the advice and suggestions! The issue was resolved when I spread the files over multiple folders. It will not display any files exceeding exactly 257. I have that resolved and roms are all present I have another issue I'm hoping can be resolved. When running GBA roms the game fits to the screen with no black border present. However, on GB, GBC, and GG roms the display is very small has a black border encircling it rather then fitting to the screen. I'm not wanting to stretch the image, but rather to have it enlarged until it fills the edge of the screen on my Analogue Pocket. GG roms have a option to strech the screen but it caused glitchy images. GB and GBC have no options to enlarge it at all. Is there a way to adjust this?
@@jdwholman Ahh! Excellent that TTSVC 66's advice worked for ya! They are awesome! 😎
As for the display size this cannot be changed I'm afraid. This is because the emulator for GB & GBC was designed to be 1:1 to a real Game Boy -- it maintains that aspect ratio due to the target hardware being an original GBA (fits on screen, has the exact same issue with real Game Boy games being played on it). Best you can do is stretch the image displayed on the Pocket itself (take the height uo to 1440 from 1067, move Y Position to 0 from +186). I know you said you didn't want to stretch the image though. 😅
@6:15, can i install the firmware on the analogue pocket or do i have to do it on the GBA advance?
You can use an Analogue Pocket to install and use the EZ Flash Omega DE (You still need a PC regardless of what you wanna play on!). All of the footage you see here was from a docked Analogue Pocket. 😎
@@RetroSho thanks for replying so fast! You da man!
@@L0nel33 Yessir, welcome! We aim to please! 😎
Ok, first off i love the video it help out alot, Second: how did you get your cheats to be in English all mine are in Chinese and i cant get then to b in english any tips and tricks for that?
How to migrate from pokemon emerald on ezflash to heartgold, migrate option not showing up
set up mode b and use the switch
Im having trouble with the cheats & the thumbnails pack how do I get the card to identify the images & cheats for the games?
I only draged the unziped images & cheats into the sdcard.
So I took at that thumbnails pack while I was creating the video, and that pack didn't have all variants for every single game that might be available, which is a shame. There is a guide on how to create them for the Omega, but I'm unsure if they will also apply to the DE. Check it out here:
gbatemp.net/threads/creating-your-own-thumbnails-for-the-ez-flash-omega-firmware.510210/
if its ok to use the miro card 256 gb one for the other store besides amazon?
im stil trying to figure this out.....
Not sure. Depends on the SD card brand you want to use. I’ve only ever used Sandisk and Samsung cards
ok. one more thing, do you have to use any cord to plug in the gba to the computer? im still tring to figure this out.@@RetroSho
@@sarahmcguffin1210 No cords or anything! You use an SD card adapter to plug into the computer to do all of your work.
Hey Sho! just followed your guide and everything is working. Although the Images are not Loading. Any idea? thanks!
Sorry about the slow reply! Did you ever get these images working?
You have to press the select button in the menu to display images. Then you can scroll over the ROM files to see them. They don't display for all games!
Cool, Now I just gotta swap this to be the NDSL slot cover and put it in because GBARUNNER is peepeepoopoo
Is this video still applicable in 2023 mate? I have mine coming tomorrow so just wanted to get familiar with how things work.
Yo! It's been a while, but it looks like this guide still holds up! Hasn't been any updates in a year since it seems. Just make sure you have the Definitive Edition (not the original flash cart) that's coming in. Also just to be aware that some people have had issues getting the custom firmware installed. This might be due to a bad batch of flash carts that have been sold about. Ensure that the first OEM update holds before attempting the custom firmware flash. Hope this helps!
Thank you that was helpful, much appreciated. I have the DE version coming i will see how I get on. It seems pretty straightforward. I like to watch the videos a few times before trying something lol, I modded my SP with a new IPS screen, usb c battery mod etc.. but only had 2 carts so I went for this flash cart.
@@King_Cantona7 That's whats up! That console set up sounds clean as hell! Espcially with USB-C battery mod & IPS screen. 🔥🔥
Would be interesting to hear back from ya on power consumption after you get all set up!
So this video is a literal god send thank you so much, but is there a way to add your own cheats? many of the included ones feel really weak and sometimes only in Chinese sadly
You're welcome!!! Unfortunately, the cheat system was the one thing I couldn't crack in a clean way. It's one of the most obnoxious, obtuse cheat systems I have ever seen, and I'm inclined to say it's not even worth the hassle. It's not a simple process at all, though you can add to it. Here's a guide if you are interested:
gbatemp.net/threads/custom-cheat-lists-for-ez-flash-omega.591665/
I've known about the thread, but it goes so far outside the scope of the video, I had to cut it. 😐 Hope this helps!
Hey bro, I ordered the same EZ-FLASH Omega Flashcard recently as well as a brand new AGS-101 GBA SP. I followed your tutorial exactly (minus the emulators for other game consoles, I only needed GBA games) The card updates firmware perfectly when holding 'L', and the menu is perfectly functional. However, when I try to boot up any GBA game it just displays a white screen (for certain games it also makes that annoying crunching noise that occurs when you take out a GBA cart mid-game). I looked at a bunch of websites and forums online for an answer and they all led to the same conclusion of contacting the seller for a replacement cart as it's an apparent hardware issue within certain cards. Now, seeing as this cart is over $100 and thus SHOULD be made with good quality, I figured if anyone had an alternative solution to contacting the seller, I'd be you. So, what's your say? Haha.
What's good brother! Haha thanks! And congrats on the AGS-101! That definitely sounds like a similar issue that I've seen and read about, so everything was perfect on your end concerning the installation of the firmware. You could attempt to flash the base firmware only as well, but I'm gonna bet it'll have the same issues, so it is just better to RMA the device for a replacement or get your money back. Alternatively, if you have the means you could also test the cart by seeing if it would work in a plain old AGB-001. Would be interested either way in what you find out!
Now! As far as an alternative solution, there IS one! Only... for a little bit more. You've heard of the EverDrive carts yeah? This would be the EverDrive GBA -X5- Mini. Overall, this GBA flash cart is much better built than both the EZ Flash Omega as well as the DE. There are a few less functions that the cart has -- the EverDrive GBA doesn't support cheats or save states like the Omega DE. It also supports far less emulated consoles as well (Has only, GB, GBC, NES, GG, and SMS). However, since you mentioned you only wanted the Omega DE for GBA games, that one fact could be over looked. 🤔
I did a video on the EverDrive around the same time as this one if you want to take a look at it! If you're interested, don't pay over 150 for one, as the cart itself usually sells for 110-120 direct from the maker Krikzz (before tax and shipping). Let me know if this helps!
@@RetroSho Hello again! Thanks for the really quick reply. Yes, see I actually owned an AGS-001 model prior to buying the EZ-FLASH Omega, but it's old, like SUPER old (basically when it first came out). As we all know that model has non-backlit screen, which looking at it now as opposed to my 4-year-old self, it's noticeably bad lmao. That paired with the depleted battery over the years, as well as general wear from my careless past-self made me decide to get a new one for one of these carts. The AGS-101 took like a month to get here, but the card didn't take long, so I tested it on the AGS-001 in the meantime. I watched someone else's half-assed video rather than yours about how to set it up (your video here was WAY better at explaining it by the way). Testing it on the AGS-001 yielded the same results as the AGS-101, so at the time I thought it just had to do with my AGS-001 being old. But even after updating the EZ-FLASH as shown in your video it doesn't work on either console.
I've reached out to my seller and am waiting for a reply about getting my money back, luckily, I kept the box and all that. In terms of getting a different cart, I like your suggestion of the Everdrive GBA Mini. I've found your video on that cart and the setup seems relatively the same, obviously there's not a huge deal of emulation on that cart, but again, I only really care about GBA anyway. I've looked at the maker Krikzz's website and it's currently selling for $104 which is pretty much the same I paid for the EZ-FLASH Omega, hopefully if I get my money back, I can use that money to get that cart instead. Thanks so much for your help, bro, and if it isn't too much trouble could you just confirm that the Krikzz website for the Everdrive GBA Mini is the correct one, as well as your video on the Everdrive GBA Mini/X5. These links are shown below. Thanks again man!
Krikzz's Everdrive GBA Mini purchase page: krikzz.com/our-products/cartridges/everdrive-gba-mini.html
Your video on the Everdrive GBA Mini/X5: czcams.com/video/EPX9hk2wuZ0/video.html
Hey! I know this comment is a year old but did you ever figure this out? I was having the same problem and it turned out my macOS was creating temporary versions of all the files on my sd card and I was getting the white screen because I was accidentally trying to load the temp file instead of the actual gba file
@@sbi705 Damn, never thought this comment would ever get a reply, literally forgot all about this haha. Short answer - No. I tried literally everything imaginable, but it never seemed to work, I even sent the card back TWICE and still the same issue persisted on all three cards. So, at that point I just sacked it off and got a refund. I just came to the conclusion that these cards aren’t made like they used to be, and they just simply don’t work anymore, and the company doesn’t really care, which would normally really anger me, but seeing as the location of the EZ-FLASH cart production company is situated in Ukraine according to their website and return address, I don’t think troubleshooting a GBA cart is the top priority on their list to be completely honest.
But can I just say, this is a STARK contrast to the R4 cards for the DS I have purchased for myself and others over the years which have worked absolutely flawlessly every single time, a couple of which have lasted well over ten years now and have had absolutely no issues whatsoever, now that’s how you make quality R4 cards.
In terms of your suggestion though, I’ve checked back on the roms on both my PC and SD card, and they’re definitely GBA files, so yeah, it was definitely the card. Thanks for checking in though boss, and thanks for trying to help me out with your suggestion. Not many people in this world would look at a year-old comment and think to do so haha.
Nice tutorial! Is this more or less the same process on a Mac?
Thanks!!! And yes more or less. Just need to make sure you have a zip program that can pull the files out and put them in folders 📂
@@RetroSho Welcome!! And awesome!! Grazie 🤙🏾
thx bud, nice and ez steps
You’re very welcome my man!
@@RetroSho is it normal that games won't write to Nor flash ? it stucks at 0Mb
@@AllemandInstable That’s not normal at all. I’m wondering if those games you’re getting have the correct header on them. It should be loading pretty fast to the NOR 🤔
@@RetroSho it's a pokemon rom hack, I had to shut down the console it was 20min in and 0mb written to nor still
i hope shutting down when writing doesnt damage it, I had no other solution
i can try with a regular rom though ( original )
@@AllemandInstable Yeah! Becareful of the rom hacks to the NOR if they have large file sizes! They use tricks to get them to work on normal emulators, so getting them to work on a flash card might be iffy 🤔
Please, someone can help me, How can I create saves from ez flash omega? . sav I mean.
How did I put games on the nor tab?
for example i have 2000 gba, how can i find a game in it quickly ?, pls
You have 2000 GBA games? Use folders and sort by alphabet (A, B, C… etc). You can then skip pages by pressing left or right to scroll fast.
@@RetroSho That's the only way, right?. Anyway, thankyou
@@trananhieuchannel7721 Welcome! Yessir it is! Not as dynamic, haha. 😂
My GBA folder doesn't show up
Hmm. What’s the brand of memory card ya using?
@@RetroSho SanDisk I think I figured it out for some reason it changed itself back to read only so I'm going to try to edit the folder from my PC instead of the card.
Another question if I update it will
It delete my games and game saves ??
Before you update I recommend you copy those files to your PC. Just in case. Don’t take any chances my man. 😎
@@RetroSho so just move em to file then move em back
@@hunterdronyt5607 Yeah! Can right click on each file and copy it over to your PC. Just in case of any issues.
@@RetroSho ok is there way to put the cheats English
@@hunterdronyt5607 You can, but the process is pretty complicated. I'm hoping to look into this a bit more since it's a big issue.
Спасибо друг!!!скажи какую карту памяти sd лучше использовать?
Добро пожаловать!! Лучше всего использовать SD-карты SanDisk или Samsung! Наслаждайтесь, если у вас есть флэш-тележка!!!
We need snes on gba
Yes we do! 😂
My gba games will not save on my DE ez flash!
What memory card are you using? Unfortunately the EZ Flash can be spotty with saving, which is a shame.
I would like them to put the motion sensor and the solar sensor because some games need them to play
It's not an impossible addition, but that would depend on the EZ Flash team. Something like it would be costly, I could imagine.
Thank you
You’re very welcome my man! Enjoy it! 😎
Can u help me out? I can’t play any games unless I write them on to NOR.
What console are you attempting to play the EZ Flash on? And can you at least boot to the kernel?
@@RetroSho gba sp yea it got to download the kernel both versions the ex flash website one and then the easy layout one. Neither play games but just booting them I just get a white screen
@@josephjoestar5444 Did you get it recently bro? Looks like it's a hardware issue (not your fault). I found a very similar issue here with the original Omega: gbatemp.net/threads/omega-ez-flash-white-screen-after-clean-boot.509485/
EZ Team recommends you get a replacement looks like.
@@RetroSho yea I just bought it. Looks like ur right . Thnx !!!
@@josephjoestar5444 Welcome mane!
The simple theme doesn't add any emulators to my card
Yeah. Gotta keep going with the guide to add emulators.
Can I overwrite existing cartridges with a rom save file?
You mean like overwrite ROMs themselves or the saves?
@@RetroSho like have an OG game cartridge, then transfer a save file to the OG cartridge. Or overwrite the save file basically.
@@codyman630 Depends on the game and dump method, but it should be possible. It would only be for GBA games. In this case you would need a hardware dumper like Sanni. That save file would then be able to be moved to the EZ Flash. You could also move the save file from the Sanni and “flash” the OG game in the reverse way. Watch a video on the Sanni Dumper to be sure if it would be for you!
Another way to do it would be to use an Analogue Pocket - you could play the game, capture the save state in Memories, then reload that Memories using the ROM with EZ Flash. You’d then save the game normally so it’s stored as a save file. The reverse is also true - play the game with EZ Flash, save into Memories as a save state, run the OG cart in the Pocket, reload its corresponding Memories, then save the game normally onto the OG cart.
@@RetroSho awesome! I'll definitely look into it. I have a rom save file on my phone and can easily send the file to my computer. But I'll have to look into the Sanni hardware dumper for sure.
can I update the old ez card or need to buy this one?
You can update the old EZ Card, but it's a different firmware download and slightly different update process. Head here:
gbatemp.net/threads/new-theme-for-ez-flash-omega.520665/
You'll want the download to the left (Simple.zip).
@@RetroSho I have like 64gb and I put a lotta games there, but not appearing all of them, this update will fix that?
@@pierregomes9159 Ahh that’s a bit of a bug with the EZ flash if I recall correctly. Try and make a few sub folders and put 200-300 ROMs in each
Where can I download games to upload on my EZ Flash SD card? Thanks
Thats a question better off not asked.
Where did you get all the roms at?
They can be found on Google with a search.
Can you show how using Pal Park is possible with this?
Sure! So given the functionality of the Mode B, you're essentially allowed to treat the flash cart as if it is a "OEM game" -- the flash cart for all intents and purposes a "real" Gen III Pokemon game.
In the settings menu, set the Mode B setting to "Cart" (in the OEM firmware this will be called "LINK"; make sure you also OK the changes) first, then move over a Gen III Pokemon game to the NORFlash. You can now play the Gen III game to a desired point of your choosing. Make sure you are pressing L + R + START and saving your game data every so often. This will create a back up of the game's data from the FRAM to the SAVER folder for you. Once you're good with your Gen III game, make a final back up, then power off the game and set the physical switch to "B" after this. This will force the flash cart to load the first game in the NORFlash immediately as if it's a real cart (until you toggle the physical switch back to "A").
From here, you can play your Gen IV game of choice, get access to Pal Park. Then once you are ready, plug the Gen IV game and the EZ Flash (With both Mode B settings still set) into your Nintendo DS, and you'll be able to transfer over your Pokemon as normal. If any issues arise, you can toggle the physical switch back to "A" and load your previous save up to the NORFlash. Before you attempt this, make sure you're practicing saving and loading the saves from memory until you understand how the feature works. Hope this helps! 😎👌🏿
How much should I be looking to pay for one?
Yo! The price has gone up a bit, but try to not spend more than 90USD.
@@RetroSho that Analogue Pocket got collected going again, hell just yesterday I called 5 local game stores not one had Golden Sun on GBA
@@ray2dee88 It's pretty interesting. Very difficult to find some of the better GBA games without paying up on eBay now. That or having some luck finding em in the wild at a garage sale.
keeps saying my sd card does not initalize!
Oooh. That sounds like that might be an issue with the cart itself! Is it possible for you to try with another SD card?
@@RetroSho I shall
Is extracting and copy pasting the same thing?
If talking about pulling files from zip then yeah. It really just means “pull this from here”.
@@RetroSho thanks man
@@RetroSho think I got it all set up good lol. No issues yet
@@dehydratedculture9126 Eyyy! You're welcome my man! Enjoy it!
Are there any cheats for Pokémon fire red and sapphire and emerald and stuff
You can add cheats from the menu before you start the game. Select the game, then scroll down to "Cheat(0)". You can them add cheats that way. Then after the cheats are enabled, select "Boot With Addon". Fair warning, some cheats are in Chinese... you can add cheats yourself too, but it's a complicated process: www.reddit.com/r/Gameboy/comments/hcq2g6/ezflash_omega_cheat_system_tutorial/
@@RetroSho I know is there way to put em English
For some reason other roms are not showing :(
Oh damn! You might wanna test with another SD card in case. Use a larger cluster size.
If this doesn’t work you may have issues with the cart itself and will need to have it replaced. 🤔
@@RetroSho i was reading the comments and i saw that you said this to another user as well lol i have a 32 GB that I just bought so maybe i need to purchase one with a larger cluster size? :)
@@tswishhh Ahh! Well you can change that cluster size during formatting! As stated in the video for 32GB and up you’ll want to select a cluster size of 128KB (It’s what I used. There’s a drop down menu to select this when you do a “quick format”on Windows).
Unfortunately, it’s not an exact science and these flash carts are very finicky when it comes to storing data. In your case, I would totally recommend borrowing an SD card if you can! I’d rather not see you spend more money on a larger SD card, only for the same issue to crop up. 😅
@@RetroSho you are a life saver!! i will do that then 🙂
Can you place a 120 gig card to it?
You sure can!
@@RetroSho thank you!
I'm from Brazil and I followed your tutorial, could you make your games gallery available?
Search "everdrive pack" or "htgdb gamepacks" on archive.org. You'll see a ton of stuff that someone uploaded there.
@@RetroSho Nice thank you, these are super organized. I also found “no intro” packs which have all the official/beta/protos/all regions/translations, but not organized in that SmokeMonster folder structure. They are also regularly updated by LongAccordian.
@@ttsvc6638 Welcome! No-Intro is a great back for historical purposes but a good deal of the ROMs aren’t verified, which is how the SM pack originally came about! HTGDB seems to continue that legacy since SM packs are no longer maintained. 🤔
@@RetroSho Good to know. All of the no intro roms I’ve tried so far worked. I always thought you needed to run that Python SM app to get that folder structure or manually do it.
@@ttsvc6638 Yeah you have to run that python script to have it verify (by CRC32) and then it’ll sort it by region, type and proto/etc. Each game was painstakingly verified to be good dumps, which is insane. 😂
Is there is spot to get .esv files?
Not that I've seen. The format is a bit wonky.
MY IMAGES DONT LOAD NO MATTER WHAT
All games? That sounds like a hardware issue...
@@RetroSho yea the title images wont show up but i just saw they are under .bmp files in the thumbnail package
After installing the original updated kernel it brings me to the sd card page which shows me ezkernelnew.bin but when I press L or R it does not change pages did I do something wrong?
Hello! You did absolutely nothing wrong at all! I'll ask ya a bunch of questions:
Does it show that the clock is running on the SD Card page? if so, did you try to reset the cart?
What type of SD card did you use? And what is the formatting type?
What I have seen (and unfortunately did not get to mention) is that there have been a few batches of carts that have been defective in various ways. Not your fault at all or the fault of the OEM or custom firmwares that you can load up onto these. I really hope EZ Team does a better QC check on their future cart releases.