Video není dostupné.
Omlouváme se.
Stylish Plant Sprayer Restoration
Vložit
- čas přidán 7. 08. 2024
- I have a question for you, how can I protect copper to stay shiny long-term state?
Every advice will be highly appreciated!
Subscribe for weekly content!
Today i present you this amazing Antique Syringe for flowers.
I found this syringe in a flea market, in good working condition but very oxidized because it is copper,
I changed the orings, and the gasket from inside de pump.
This syringe was used many years ago in the garden to apply flower treatments and watering, now it's just a very bright and interesting decoration object.
If you like this restoration please share and subscribe
Disclaimer: I am no professional. I am completely self taught and would appreciate any feedback, advice or constructive criticism and suggestions .
#restoration
#antique
#tool
![Mesmerizing 1930s Artillery Sprinkler [Restoration]](http://i.ytimg.com/vi/NVgXvGDgq4Y/mqdefault.jpg)
Thank you for watching my video! After you finish watching you should check this Yellowed Playstation PS1 here: 😎🥰 czcams.com/video/4HBr8NE17oc/video.html
Came to watch the plant sprayer restoration; stayed for the gun show.
😋😋😋
I’m actually working on restoring a wonder lamp right now. And along with that, I would like to mention that I am only 13, and with little prior experience with any tools, your videos have taught me how to restore things! When it’s done I will be posting it on Instagram and I will tag you in the post so you can see it.
I'm always impressed by how well those turn out.
There is basic chemistry behind cleaning metal oxides with acid (vinegar). Bicarbonate neutralizes the acid, therefor t can't clean the oxides from the surface of the object. Vinegar and bicarbonate is used in cleaning only because it bubbles and that can help with clogged drains or similar but not when you need a precise chemical reaction or in other words when you need all the strength of the acid in braking down the oxides
That's what I was going to comment! You can use the bicarbonate to stop the process when you are done treating the metal. Otherwise, realistically, you don't need to do anything but drain your acid & water bath and rinse with water when you're done, then continue your restoration process. Bicarbonate is used in the water to create your reaction when electrolysis rust removal is being used however!
when i seen him adding the vinegar i was like omg he just made fizzy water
Agreed. Bicarbonate and vinegar makes salt water which does nothing. The vinegar by itself will actually work.
Yup, I was just about to write about that. First to use the acid for cleaning. Some says Bicarbonate cleaning the silver and other shiny metals, but I think it's more due to abrasive properties, than chemistry...
Totally was going to say the same thing. You'd remove the corrosion much more easily with something like 0000 steel wool would also take off the corrosion, and is probably actually less abrasive than scotchbrite. You could also try a chelating agent like evaporust or MC51. Their websites both say that you can use them on brass, and they won't work on brass... which is super confusing, but since they definitely won't damage brass, it might be worth a try.
Comments as of Aug. 20, 2019
Half are about oxidization and how to prevent that
The other half are about how nice his arms look.
Jajajajajaja
😂😂😂
Thank you for your great videos. It would be interesting in each video to put on the screen how you acquired each item, and what you paid...I'm always curious. Cheers from Canada
This syringe would have been used as a bug spray. Insecticide and water will have been mixed in a bucket and then drawn up in the syringe then sprayed on plants. Nice resto and you have done it well. :)
You have right, thank you
It can also be used as a grease gun and a watering spray for plants using the different heads.
Ian Allen - Marlon Brando uses one as he plays with a young child, then sadly dies in the film The Godfather.
It`s for baking, u put flower inside...
I actually love the idea of having a tool like this instead of a single use plastic one. Saves the planet.
Hi I have just seen the syringe video, my teenage years came rushing back. In the late 1950s my formidable grandmother then about 90 years old kept one loaded in a bucket of water in the kitchen of her cottage. The cottage Ryder Brow was originally built in the countryside but the expansion of Manchester left it surrounded by terraced housing but it still retained a small garden which she loved. However, all the local cats also loved scratching around and messing it up. She would squirt at them as they walked along the back yard wall. The cap with the single hole gives long range jet.
I believe that she got the syringe to act as a fire extinguisher when Manchester was being bombed in WW2.
nice story 😍
Oh, that comment brought back loads of memories, I lived in Gorton as a kid in the 1960's Spent many happy days on Sunny Brow park, just up the road from Ryder Brow, great for sledging in the winter! Or a walk down Hyde Road to Belle Vue, to see the zoo, or go in the fun fare on the ''Bobs' or the ''water chute'''. Wow 50+ years ago!
1/3 salt, 1/3 vinegar, 1/3 flour, removes soot and patina from copper brass bronze, so im told by mr i make a new one lol beautiful resto as usual, love tysy's work!!!
Agree with Ian Allen, it's a spray often used to spray a soap solution for tackling greenfly on roses ... when I was a boy in the 60s these were still very common as they were also used during WWII by the homeguard fire services so there was one on every street corner ... between the two uses just about everyone who tended a garden had one. And they made excellent high pressure water pistols.
The ONLY way to preserve the patina of copper is to use it regularly, the acid/grease on your hands combined with the friction of use are good for many metals. Daily use results in a natural darker gloss patina which also protects the surface, you can polish it off to get a better shine but then it starts to oxidise.
The cleaned results at 10:44 show a decent "nutty" sheen - but the scouring pad has damaged the surface opening it to verdigris formation.
If it has to be polished a coat of marine varnish cut to 50% with white spirit will seal it - but it's then vulnerable to corrosion and will be difficult to clean once it starts to tarnish.
What about restoring brass ones?
Cet arrosoir à piston est fantastique !
Nous sommes aujourd'hui le 1° juin 2019 et je viens de passer l'après-midi à regarder vos vidéos et celles de votre ami " my mechanics " . Je constate une chose: Les objets sont beaux et conçus pour être réparés : ils sont complètement démontables, avec des éléments qui peuvent être facilement dupliqués !
Le tout jetable n'était pas encore à la mode, loin de là : tout était fait pour durer !
C'est d'ailleurs l'extrême solidité de ces objets qui vous permet de les chiner aujourd'hui et de les restaurer pour nôtre plus grand plaisir !
Quant à votre question, si elle est toujours d'actualité, je ne vois qu'une solution : Vernissez votre " seringue à rosiers " . Je pense d'ailleurs que les difficultés que vous avez rencontrées pour nettoyer le réservoir viennent du fait que tout l'instrument avait dû être vernis pour sa protection .
I just love the look of brass! Fantastic restoration!
Wow, I have been following you for about 2 years now, but hadn’t seen this video until now. It is amazing to see how much your productions have improved over time 🙂 but also how the bench grinder slowly got worse 😄😄. Keep up your good work mate, love and respect from 🇦🇺👍
I have been watching your vids for years and even watch repeats as they are so tremendous. Another restoration done to perfection.
Thank god for garden hoses.great job!!!
So beautiful to see this garden sprayer/atmosier (?) restored to the original brass
No comments about the Biceps
sexy sexy frenchman
Yo dude....this dude has small children for biceps
I actually came here to comment about the Forearms and Biceps!
I'm here as much for the arms as I am the restorations.
. Was about to hahaha
might be the biggest transformation ive seen in one of your vids from beginning to end, also interesting to see how your vid style has changed in the 2 years since this was made
For display purposes (not a lot of handling), a paste wax will keep it shiny. Plus it is easy to re-apply. Clear lacquer is more durable, but once it chips, it is a lot of work to re-sand and re-paint. For cracks in wood I like to mix some of the saw dust with wood glue.
Don't add bicarbonate to the vinegar! The bicarb neutralizes the vinegar and reduces its ability to remove oxide.
If you want to protect copper (or in this case brass), give it a coating of ordinary hair spray.
Adding bicarb just makes the vinegar less active, Use bicarb to wash the piece after soaking in vinegar.
I find a good way to do stuff like that is with a drill and a damp cloth with bicarb on it, like a very mild abrasive
When he said “do you like my oilers?”, I nearly lost it 😀😀😀
That oiler! So happy it's working again.
I like that pressure sprayer😀 he does a great job.
There is no way of permanently preserving the shine of brass. I've seen many methods tried to preserve the shine of brass, lacquers, varnishes, etc, but in the end (As the above methods eventually decay and become dull and extremely difficult to remove and clean the metal again..) the only way to preserve a shine is the hard way and to use brasso or some other metal polish of your choice when it looks like it needs it, get the duster out and polish it.
Oxidization will always win in the end.
John Banks I agree there aren’t many good ways to prevent oxidation of brass, only elbow grease to keep it polished and shiny. And I know most people seem to like the polished shiny look but I was always taught that unless it affects the function of a part or tool, removing oxidation from metals like brass and aluminium was vein and pointless and potentially detrimental to the longevity of the tool. Oxidation forms on the surface from the metal reacting with the air and moisture forming an oxide. But the oxide layer on the metal isn’t deep and typically once formed prevents further oxidation of the metal by forming a thin barrier, after all an oxidation of a metal can’t be oxidised. So by removing the layer of the oxidation for the sake of polishing a metal to look nice, all you’re really doing is resetting the process and stripping away some of the metal itself albeit in oxidised form. Only a tiny amount but do it often enough and you’ll have no metal left to polish. So if the metal doesn’t need polishing to function really you shouldn’t do it. Good example of this is in jewellery and watches wear scratches and daily wear marks are left on the surface and all that’s really done is cleaning up grime rather than polishing out to get rid of scratches and wear.
There is storing it in a pure nitrogen atmosphere to stop the oxidation process, but you are right, in the end, short of putting the piece into outer space, it will eventually find oxygen coming after it again. lol. Good old scrubbing and elbow grease to keep it looking beautiful.
120 years ago they knew what to do.. they used a form of electroplating.. the nice dull red was the copper they deliberately deposited on the brass to prevent corrosion.. copper sulphate and a battery plus a copper plate or similar.. the red dull copper coating on these old water tools is deliberate, for the same reason we use copper water pipes and chrome our brass taps.. copper oxide (brown.. some valency or other) is virtually non reactive with clean water
That's actually a pretty cool tool that I never knew existed.
That looks Like it is from the future, nice !!
I just watched your video where you restored the oil can and I know my grandmother has or had similar cans so maybe I'll someday inherit those from her and watch this video when I eventually acquire one in order to restore it, same as you did. So thanks for taking the time to make these videos. Keep making videos like this. I will absolutely keep watching them.
That’s the prettiest garden tool I have ever seen!🌷🌷🌷
I love the shiny stuff...🤫🤭😍😍😍😍 Another amazing Restoration.
Love the result. I might try the hairspray solution or automotive spray clear-coat. I have a similar unit, marked "C G Lawson's" I was informed that it was used for dry / powder applications on plantings and in gardens. The internal plunger is a leather disk, and has the same three different application tips mounted as yours. Thank you. Now I have no excuse for it's continued well used condition.
Just found your channel today it’s awesome work you do. Thank you for keeping historical things going
One option to protect it from oxidizing is Renaissance Wax. They use it for the very purpose of preventing oxides from developing on antique copper in museums. Very easy to apply and buff. But, I would only use this if it were a piece that is not going to be used often. If it will be put to regular use, a spray lacquer might be best.
I wish I had a man who did restorations like u I would luv 2 help him out I think it would b so satisfying 2 c the end result of ur hard work.i luv watching u working + seeing the final result good job m8 xxxx
Всё информативно и понятно👍 рад что я нашёл вас на просторах CZcams.
BEST ONE YET!!!!! 👍🇺🇸👍🇺🇸
I've been watching your video's for a few weeks now, and I'm amazed at what you can do!
Another beautiful job. Well done!!!!
IT'S RESTORATIONS LIKE THIS THAT MAKES ME WANT TO DO IT MYSELF.
VERY SIMPLE BUT VERY ELEGANT, FANTASTIC JOB COBBA. KEEP THEM COMING 👍👍👍
WoW, una restauración fantástica con resultado espectacular!! Felicidades!!!
At first I thought it was what I remembered as a vintage garden duster which has always had a feeling of danger and poison about them, glad to see I was wrong. It's gorgeous!
First time ive seen an oiler like this man! Simply wow!
Only wax to protect.
Tout d'abord merci pour cette super chaîne.
Pour les laitons cuivres et autres, je vous recommande la pierre blanche qui sera plus efficace que le vinaigre. Il faut ensuite la rincer à l'eau froide. Je l'utilise beaucoup avec succès.
Continuez en tous cas, ça donne envie de bricoler!
Well done sir. Just the perfect level of restoration. Charming sprayer looking good.
Your work is amazing my friend! Thank you for this great video.
For oxidation, just use a metal polish from time to time.
Here in USA we have many like flitz, nev-r-dull, etc. Just pick on that's ok on brass. Nev-r-dull is nice because the wadding with the chemical comes in a can and you can just pull a piece and use it.
I've used flitz on brass before with no issue.
I also like the idea of a synthetic paint sealant for cars like nu-finish. As long as it's synthetic should work. Just rub on thin layer, let it flash and haze, then buff off.
J'adore voir les vieux objets reprendre vie grace à vous!
Best crossover episode ever
One of my favorites!!!
wow, you did an awesome job, it almost looks new.
You always make a great job but that polish looks amayzing
Beautiful, well done
I like that you repair the wooden handle and sanding using the drill. There are people who makes new handle if it's missing ok but to keep high value what you done was excellent
It's so pretty!
I like that far better than a water can!
Wow just wow!
came out really nice.thanks for sharing..
Quite the happy little sprayer you have there.
Beautiful finish looks brand new great job
Beautiful work, beautiful piece!
As Nitro said Shellac, or a Laquer very thin coat, spray it on. On smaller objects, I have used clear nail polish on copper screws, even clear nail polish on silver works wonders for years and years. For the clear nail polish which is an enamel, use an air brush, for smaller objects that tarnish it does work great.
AS well, correct me if iam wrong this is Brass not Copper... copper is a reddish hue to it brass is more of the golden color, since it IS copperwith Tin it it. Does it still oxidize yes, but browns first then greens. Either way, Shellac, Laquer, and Enamel thinly sprayed over thoroughly dried (even warmed brass/copper/silver works better) metal works the best.
Great Videos btw...I do love the restos.
¡Excelente trabajo, muy buen tratado del bronce! Saludos desde Honduras.
Beautiful!
And, Yes i like Your Oiler... :)
Another great renovation! Thanks for the video!
Thank you Veradona
I always like it when he explains why he uses different products.
Love your little oiler thing it's so cute
It is so wonderful!!!! I love it!
Beautiful Restoration.
You do amazing things with old rusty stuff
I loved the video!
Elles sont au top tes vidéos, c'est très satisfaisant à regardé. 👍
This reminds me of when my parents used to have a giant cylinder plant sprayer that came with a hose and nozzle.
My guy watered so many plants he got the gold skin
Excellent job!! C'est magnifique!
Excelentísimo trabajo ha realizado !!!
Hi are you from France? You shoot the content in detail, as I don't turn it on, it's so calm in my soul, and I immediately put it to sleep. 🤣🤣🤣🤣
Yes, I like your oilers.
Gorgeous
Thank you
Nice! I like it. Thank you
Great restauration. Brass is amazing, if taken good care... Congrats.
Wow, it came out beautiful 👌
Good job TISY...i loved
It’s so beautiful, awesome job 😊
Thumbs up and enjoyed the video
Very interesting restoration like brand new came from factory
Am I crazy or was that one sexy looking bicep?
I came here to read the thirst comments.
He's showing the big guns
Beautiful restoration and a very beautiful garden. You are a master of restoration.
Truly beautiful.
Ho wow, beau boulots ! J’aime quand ca brille!
Votre travail est magnifique
Good find
Really good. Specially the test
The epoxy in the wood crack makes me cringe. Don't do that... Wood glue mixed with saw dust from the same wood works wonders and done right make it look like there was never a crack... :-) great work btw lol
I thought the same thing. I yelled at him.
Epoxy is easier and usually better then sawdust and wood glue wood glue is not made to fill cracks where as epoxy can I would agree to mix sawdust in but not to wood glue
@@AstoundingAmelia Epoxy is stronger, but if it's not a crack that has to carry weight, just using wood glue with some wood shavings works perfectly as filler.
It worked. Who cares.
That is a sweet trick I have never heard of. Mixing sawdust with wood glue as a filler. Now to find some cracked wood...
How to protect the copper? Clear spray on varnish will keep it shiniest for longest.
Kind of glad to see you using gloves there. Some of the older pesticides contained nasty things that will persist for a long time....Sodium Arsenate was not uncommonly used.
Aliclean for getting the crap off of alloy wheels gets the oxidisation off of brass pretty well too. After buffing, the best metal polish is Solvol Autosol. Get it on Ebay. If you need to keep the finish for display, wash all traces of polish off with brake cleaner or similar and buff with a soft dry cloth, then spray with clear laquer.
Hey Tysy, nice work my friend! I see you have learned your lesson and now you polish brass (this is not copper). Of course it takes more time polishing in comparisson to grinding down the oxidation but isn´t the result AMAZING?! One last advice, try to keep components to an original state. I doubt this had rubber seals in the years it was made. I would have used the same 'canepa' seals also instead of the rubber seals. Keep it up and grow a profitable business out of it. Hard work will get you big bux one day. FYI, I restore vintage mopeds and love your work. I somehow do not get to youtube my work due to time restrains but now that I see your work I think twice to uploading my work too.
You do nice work man
It great job you doing great things
Very nice video and a very interesting piece.