socket weld tee modeling in Autocad 3D 2016

For detailed dimension for your reference, pls click this link autocadnetwork.blogspot.com/20...
This is a socket weld tee fitting exercise using Autocad 2016. Comment below for critique/clarification and thank you for subscribing.
"A Socket Weld Fitting is a pipe attachment detail in which a pipe is inserted into a recessed area of a valve, fitting or flange.
In contrast to buttweld fittings, socket weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 4 or smaller.
To join pipe to valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods
• DETAILS OF SOCKET WELD FITTINGS
SW Fittings are family of high pressure fittings are used in various industrial processes.
1. They are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted, and for steam 300 to 600 PSI.
2. They are used only in conjunction with ASME Pipe and are available in the same size range.
3. They are used in areas where pipe-work is permanent and are designed to provide good flow characteristics.
4. They are are produced to several ASTM standards and are manufactured in accordance with ASME B16.11. The B16.11 standard covers pressure-temperature ratings, dimensions, tolerances, marking, and material requirements for forged carbon and alloy steel fittings. Acceptable material forms are forgings, bars, seamless pipe, and seamless tubes which conform to the fittings chemical compositions, melting practices, and mechanical property requirements of ASTM A105, A182, or A350.
5.They are available in three pressure ratings: 3000lbs, 6000lbs and 9000lbs"
www.steelfittings-flange.com/h...
www.bensound.com/
~-~~-~~~-~~-~
Please watch the detailed instruction on how to do a mechanical model using AutoCAD 2018: "Mechanical Modeling-Universal Coupling in AutoCAD 2018"
• Mechanical 3D modeling... . I will be available to answer any related questions.
~-~~-~~~-~~-~

[@tomkayanja2388]

Thank for your vedio, well presented, but can please work on the volume as it is very low.

[@ajithdc1]

Nice Lesson, Thank you

[@rob-xvideonetwork8581]

Hi, I'm your upload viewer all the time. I always admire what you are doing..a fantastic job..I'd like to request you if you can provide me with a standard shipping 40ft container..i really appreciate that..

[@jamiledduranescobar9303]

You are a good teacher, thanks for the explication,
please don't know if you could provide me the dimension table of the socket weld accessories
Thank you

[@fahmibazher4735]

Very good tutorial

[@AC3DCad]

thanks

[@papillonbougie7080]

very good thanks

[@AC3DCad]

thanks for watching

[@humbertohernandezgonzalez549]

Thank u' for your video, could you help me for a Tee 2"x 3/4"

[@AC3DCad]

Ok

[@ahmedalhasani8992]

Can you upload picture of figure each drow to help us drow it

[@AC3DCad]

I am working on it

[@AC3DCad]

Pls visit this link for the dimension autocadnetwork.blogspot.com/2017/11/socket-weld-tee-tutorial.html

[@sofianemansouri8680]

it would have been quicker to draw half the shape then revolve, for top part the same manoeuvre then union everything.

[@AC3DCad]

Yes I did in this video czcams.com/video/WHIy_r1O-Zs/video.html. Thanks for watching

[@thebrownmamba7707]

3:11 I dont know why my drawing is gone after i clicked the front

[@AC3DCad]

maybe you have another a segment/object drawn far apart ( likely accidents that can happen in 3D) just bring back your drawing to SW view or to the former view where you can see your drawing , select the drawing then right click , hover over isolate and select "hide object" (your drawing will disappear) click the zoom extents and the unwanted object will show, delete it. Now , to bring back your hidden drawing, just right click , hover over isolate then select "end object isolation"

[@AC3DCad]

or you can type zoom extents, type select on your command window then type all. All the objects will be highlighted including the unwanted ones. Just delete the ones that are not needed.

[@thebrownmamba7707]

oh my god thank you for your quick respond sensei.