FIXED. PS3 Slim Green Light of Death (GLOD). No video/No audio/No controller sync

PS3 Slim 320GB model won´t show video(either HDMI or AV) or audio and won´t sync any controller.
- On start, the PS3 Green light comes up nothing happens. No sound or video.
- Insert the game or any disc into the slot, blue blinks, and again nothing happens.
- Try to assign a wireless control nothing happens.
- Try restarting the console, unplugging it for a while, or keeping it on for a long time again does not solve the problem.
The green light of death. GLOD
ps3 glod
ps3 slim
ps3 green light on but no display
ps3 red light of death fix
ps3
ps3 not turning on green light

[@DARTHSIMOUS]

Great repair, Master Idrees ... Another 3000 series Slim saved ...👍

[@abrahamadekanye5714]

Wow great repair job👍 Mr Idrees, i have like four consoles with this exact fault, will chk the bison resistors. Great job
Greetings from Nathan.

[@syazwandzulkifli8137]

Me : Are you having a good time Mr. Idrees?
Him : @4:52

[@idreestech]

I enjoyed fixing such a mess.😀

[@makvlogs2323]

Well done sir great job

[@bokkibeatz55]

Nice video once again not everyone will be able to fix it because not everybody can afford the oscilloscope try next time with the FT232R USB UART and cool that u use subtitles from now on✌

[@idreestech]

Fine.

[@kdesignmail]

Great job! With my PS3 i can play for several hours, but if i turn it off and then on again it will not show image... i have to let it cool and then try again.

[@copleskas4889]

Bro you are my angel

[@sergiojimenez3415]

You’re out of this world

[@Mobile-Tech72]

hello bro ps3 only beap no any lights......?

[@sussysussy513]

My ps3 slim 3004b turns on for 1 second then off syscon shows error 3010 Do you know ho to fix

[@abdilnas7563]

That could be a faulty power supply, try to replace it.

[@sunnyhenry7947]

This is great job, please how can I can get this reading meter I mean the one for the resistor

[@reshwan_]

I measured the 500ohm which shows 450ohm and the 55 ones is correct..do i need to change it? I think 450 is okey..so what causing the issue?

[@idreestech]

Maybe some other component causes it. It could be the GPU as well. HDmi port or its component.

[@lynchdemartini]

If the resistor is bad will it be too hot to touch when the console is on?

[@idreestech]

I have never experienced like this.

[@pashamamedov6773]

Как он узнал среди кучи резистораз, что именно тот неисправен...

[@kevinmagsy0312]

All hail to master!

[@piyushgamesoftwarerewa7793]

Nice

[@Armwrsling]

thx🤩

[@zerogaming8967]

My ps3 slim 3000 series turns on and then off after 3 seconds no light , changing the psu didn’t work

[@idreestech]

Please watch the videos I've created that address the errors at hand.

[@JhonDCHM]

Exelent

[@adangzls1655]

Hello, I have a fat ps3 with glod, I have noticed that the rsx does not heat up, do you think that is the problem? Thanks

[@idreestech]

Then check power section for RSX. Switching inputs on inductors.

[@infinitymobile9922]

Good video ❤️

[@idreestech]

Thanks 😁

[@rabiusharefbabina2844]

Pls my teacher I have super slim PS3 such is the problem like this how to fix it ?

[@idreestech]

You have to configure the fault. If you have tools, you can do it. I have made some videos on PS 3 super slim too. You can watch them.

[@reshwan_]

whats the value of that resistor

[@idreestech]

I could not remember all component's values but for some. You have to verify it from another good motherboard.

[@user-kj2qo7wr1e]

استاذ ومعلم

[@manolitovj]

💪💪💪💪🧑‍🔧🎮🎮

[@user-km1ko2io6v]

What model of resistor

[@idreestech]

?

[@BilalAhmed-hc5vm]

Bhai jaan mera PlayStation repair hu gaya hai ke nahi

[@Mehdi-x]

Me it's only when i put my hard drive

[@asadawad3604]

Ap kidar ho drees bhai

[@arshadalitv6112]

Hello

[@kondwanibanda4219]

My ps3 slim has no display and the gpu is not getting hot

[@idreestech]

Check for the HDMI encoder chip or replace it with a good one.

[@jackrich246]

❤❤❤
Please do Live streams

[@idreestech]

Fine.

[@clambone337]

My glod was caused by the rsx chip on my board

[@ZeastOfficial]

did you fix it? how?

[@clambone337]

@@ZeastOfficial i covered a Pennie in thermal paste put it on the rsx to see if glod would go away and it has been working for a good month almost its backwards comp i would get it fixed but its working so no need

[@clambone337]

@@ZeastOfficial you also might have to use multiple depending on how bad it so if one does not work try 2 dont stack if 2 doesnt work try 4 if 4 doesn't that means the solder is not recoverable and needs reballing

[@clambone337]

@@ZeastOfficial i also learned this trick from someone else in the youtube comments they said its a temp fix tho but for me i just put thermal paste on the coin and ofc put new paste on the chip i tried repasting to see if glod would go away but it only did once more pressure was added to the rsx chip

[@ZeastOfficial]

@@clambone337 I fix it yesterday thanks God! I open the rsx chip and clean it and put a thermal paste in the middle and I put back the rsx and it's work!!

[@arshadalitv6112]

Assalamualaikum

[@idreestech]

WaAlaikuAslaam!

[@asadawad3604]

Pakistan india Bangladesh

[@idreestech]

Pakistan

[@jamesavanzado450]

same model as yours, where do I buy the chip

[@arshadalitv6112]

Sir please apna koi phone number de apse rabta Karna hai

[@idreestech]

Please join me on Facebook.