The KD4SIR shack is now radio active!

After years of not having a shack, I have one at this location. This will update my pass-through video and describes my antenna install and lessons learned along the way. KD4SIR is radio active on HF. :)
My previous pass through video
• Amateur Radio antenna ...
Tri-State Amateur Radio Society.
www.w9og.net
We host a hamtober fest every October in Lynnville, IN
www.hamtoberfest.com/
Big shout out to Jack Roland KE0VH for all his shack updates! Thank you Sir!!
www.smpte-sbe48.org/wp/?s=lazy...
or
www.smpte-sbe48.org/wp/the-ke0...
(some of my pictures shows the angle irons installed wrong - it was corrected to match Jack's instructions)
Salutes to Corporal for my virtual survival/bush craft training EVERY Sunday. Some people change your life from afar. He's a ham too but don't know his call.
/ recall5811
The Pie plate radials used up a lot of trash RG6 that we have no use for. But does the coax efficiency matter in regards to length?
Jefa Tech LL400 - I love this stuff. Buy good coax from the get-go, that way you don't throw away the cheap stuff for this when you know better. Like me. :)
www.jefatech.com/collections/...
So is there any "extra" losses to using these switches if the table matches regular coax as tested in the ARRL lab?
Follini, Paul, VE1CZX. "Inexpensive RF Switches for the Ham Shack" QST Magazine, August 1986. www.arrl.org/files/file/Techno...
OMISS, or O.M. International Sideband Society, has been operating list-type awards nets on the General Amateur bands since 1981. Great fun!
www.omiss.net/
I wanted to mention and thank the person for the idea of hanging my microphone from the wall with the shelf frame and board. It was a video about making a home sound studio and not Amateur Radio related but it worked for me. He did it to keep the singers from touching the mic. I had been fighting my mic stands forever (always in the way) and now I just swing it in and out of position without fighting the weight of it sagging. Perfect idea.
73, Scott

[@scotthibbs]

I forgot to mention my youtube elmer, W5CYF Tinker John, for his video making a coax switch. He gave me the idea of using pop rivets which made this easy to assemble and kept me from using solid wire. :) czcams.com/video/5xn_EjhklYA/video.html

[@DonzLockz]

Great antenna, alot of work but it should work well now. Cheers for sharing.👍🤓