Krups, Dolce Gusto KP2208 Repair, Disassembly manual, guide
Vložit
- čas přidán 18. 04. 2013
- To find all the Spare Parts for your Dolce Gusto you can go to rounded.com/kp2208/
Like Rounded.com on Facebook to read about the newest phones, video's and see our excusive offers, discount promotions and new promotions! / 148453478557822 - Věda a technologie
I came here to see if I could get help as my gusto was blocked or air locked so opened it up after trying the tub on/off thing for weeks. As mentioned previously the video doesn't show all the steps and luckily I read a comment (thanks again russian friend) and laid the device over and poked a hearing aid plastic cleaning tube up the pin NOT the devices own as its not long enough. I got a good couple of inches in and felt an obstruction which cleared it. So, if you run your machine dry it drags bits through and clogs the needle. No need to go through the dismantling process and its dangerous too!
You guys just saved me £80 as i was about to get a new machine. tried Russian friends trick worked a treat.
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact czcams.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
if you want to disassemble it by yourself - it's almost impossible. This video shows only part of this process. There are a lot of small plastic fasteners... But I've just repaired my device different way. You just need to wash the needle at the top of the machine. The machine needs to be turned over (make sure that the water does not get anywhere inside - only in the "head" of it). Be sure to turn the lever on the top of the machine to "hot". After that, wash the needle by directing the flow of water directly into it for 2 minutes. Then also for the "cold" position. Turn the machine over and let the water run out. Repeat if necessary. The needle will blow and the pressure in the compressor will appear.
spot on advice mate WORKED A TREAT cheers!
Thank's works perfectly now.
Hello, thanks for the video! Question: I think my Krups Dolce Gusto doesn't heat water enough. I meaured it, it is roughly 75-78°C at the point where the water leaves the nozzle. The coffe come out not saturated and not tasty. Do you know if I may increase it somewhere inside the device? Maybe there is some electrical component that controls the temperature.
I tried and it works on real ducks also ;)
Wow, my phone now does an excellent coffee
Where do you get replacement parts for dolce gusto. Thx
Hi, excellent video. I could dismount almost the entire machine BUT cannot separate the cover of the head (that rounds the bidireccional interruptor and the needle locker). Would you please help me?. Thanks from Argentina.
Soft Power ij
what tool did you use can't find the correct one to remove screws. please help
me neither. the screws are made so it's virtually impossible to remove them without ripping them off with pliers.
Pasveer Leeuwarden
Torx T10 with a hole (professional torx).
@@DanishWarriorSkald Thanks!!
Danish Warrior Skald they don’t even have replacement parts. After the warranty ends it’s trash where are we going to get replacement parts?
These 2 top screws were impossible which was omitted on this video. I was really really pissed unscrewing it.
Dolce gusto company do it on purpose so you buy another machine. They don’t even sell replacement parts. Another word if messes up after the warranty you throw it away. Dolce gusto machines are junk.
Je bute sur le démontage du socle inférieur. C'est juste la partie qui n'est pas montrée sur cette vidéo, on le voit démonté, mais on ne voit pas comment il faut procéder. J'ai beau insérer un tournevis dans les 4 fentes qui ressemble à des clips de fixation, mais rien ne bouge. Quelqu'un peut-il m'aider ?
Esse vídeo é bom para quem é surdo kkkkk
Attention :
Ce n'est pas aussi facile à démonter que ce qui est montrer.
Il y a des systèmes de verrouillage à enlever, des accroches etc. Il faut donc bien regarder et y aller doucement.
Pour enlever la pompe (le cube gris) il faudra utiliser une pince pour desserrer les 2 fils métalliques (desserrer et non enlever) et pouvoir sortir les 2 tubes en plastiques.... Il manque plein d'étape et c'est les plus important qui ne sont pas montré. Au début, on voit la 1ere partie qu'il enlève, très facilement... Mais le petit boîtier blanc avec le bouton on/off est très bien fixé et ne s'enlève pas aussi facilement (on voit sur la vidéo qu'il est déjà sortie des encoches de maintient).
Bref, mauvaise vidéo, qui ne montre que certaine étape.
what sort of fucked up screw driver is that at 1:00 ?
Un miracle s'est produit : les deux coques se sont détachées toutes seules. Sans montrer comment on fait, on casse tout ! Pas très utile. Dommage, c'est un réel besoin car sans pouvoir démonter, inutile d'acheter des pièces de rechange :(
es un vídeo mudo..!!!
Not a full video and definitely not as piss easy as you make it look. 😠