Top 5 best life hacks for lighter Subscribe for new interesting videos! goo.gl/Q7P2Uh Follow us: Facebook: www. wearexchannel Twitter: / wearex92 Song:
I wish people would stop calling these videos "lifehacks." Lifehacks are supposed to make your life easier, and these do not. Just call it, "cool things you can do with lighters."
Ok so the idea is, "lighter dead? no sweat. Just get a plastic bottle, scissors, a bunch of cotton, electrical tape, a soldering iron, ethanol which everyone totally has lying around & build a new one"... Or just spend a buck & get a new lighter. XD
No. 1 has a high possibility of a hospital visit as an end result. No. 3 will most likely melt the plastic bottle and in turn quickly ignite the ethanol soaked cotton. Possibly burning down your house if no. 3 is left unattended. Both will give you a good story to tell people who ask you why you look like Deadpool or how your house burned down.
that is just in case the lighter resevoir is broken or need more bigger capacity of gas but thats not necessary to have a bigger one but if you have a broken resevoir then this would be useful
Andrew Miller what if you dont have a solder and practically a solder needs electricity so you need power supply of course you dont want to waste ur time looking for one when ur starving. (unless you do the tutorial in making the lighter as a solder but there is no connection on about that cotton lighter I'm saying bruh)
Thanks for sharing 👍 instead of gadgets that only direct fidgety fingers around in circles that gives way to nothing really, you came up with something from what others would have not considered doing anything with. I may not use them all but there's some I'd try out. Either way, it's got my gears going and wanting to piggyback my ideas off of what you began. I love the crazies and the creative in spite of the tone of "wtf" that's bound to be expressed by the uninterested (pretty funny too though once I'm done being defensive lol 😅)
Soldering iron trick is amazing and will save me out in the field at some point for sure trying to see if something works at an Electronics fair or whatever that's amazing thank you
kris that soldering job was a really bad one though😂😂 Probably just invest in an actual soldering iron if you're going to be doing any soldering on any wire larger than what he did, and if you're going to be soldering more than once in your life. That would be a huge pain because the paper clip would cool off so fast you would most likely never be able to finish a solder in one heat, btw, don't cold solder like that.
number 1 and number 3 are very unsafe. because most lighters are not supposed to be held on for more then 30 seconds or else the flint that is used to make sparks super heats and explodes. you can see a demonstration if you take apart of lighter and pull off the wheel and see a bit of metal with a long spring. light this to red hot and throw it on the ground and it explodes with a bright light. number 1 hold down the spraying bit causing heat to build up. and number 3 using a cotton wick so close to the igniter is the same principle. number 2 is just how tweakers light up meth. number 4 as a make shift soldering iron is actually pretty good. unsafe but good.
With the first hack how can you touch a fiery hot nut/bolt to twist/adjust it back so flame stops? Maybe strong lungs will blow out the xlg flame. But fluid will still go on releasing...
I can't believe I just wasted 8 minutes of my life watching a 5 year old play with lighters and a glue gun he found in his mom's pantry to make larger, more flammable one time use plastic flamey things things that will melt immediately because of terrible engineering. I guess I'm the fool for thinking this was going to be more than pre-school playtime.
As a life long smoker, of various different things, I guess this guy doesn't know that black plastic near the sparker melts and would ruin any of the work you just did.
Bro I build the beast of a beast that could withstand that 😆 stoned shit less I got the notion to try it do to the fact we were having a power outage and no candles ....I used copper pipe fittings along with brass fittings.... they were bad ass all you need that is not metal I'd the pull out top from a clipper the one kind that has the packing tool/flint holder combo dealo..... they are bad ass I'm working on making a few larger ones that will be tiki torches for the yard with thier own sparker on each so you can just walk by and swipe a finger 😆
The fact you just mentioned Comedy Gold from chowder shows me there are still good fans of those awesome ass old cartoons on YT and the internet, I love it.
#4 would produce a "Cold Solder Joint" this is week and in many cases will increase the resistance of the wire. You have to flux and heat the wire a you apply the solder. I must say #5 was pretty cool as cutting foam is a mess and if you need a small piece its hard to do.
These are not "hacks." It is just things you thought of when you were really bored. 1 is contrived as shit. 2 is a neat trick but not a "hack." 3 is a complete waste of time, and 4 and 5 are the same thing which is taping a metal thing to the end of it.
W #1, keeping those cheap lighters lit like that will cause it to mealt the plastic that holds the spinner that rubs the flint #4 was actually pretty slick & useful
There's really not a point to any of these things. You use a soldering iron to make holes in a bottle cap but then use a lighter and paper clip to melt solder in the next "hack".
I wish people would stop calling these videos "lifehacks." Lifehacks are supposed to make your life easier, and these do not. Just call it, "cool things you can do with lighters."
Kyou Capps
I was going to say the same thing but you beat me to it
*things you can do with your lighter
Cool is a bit excessive.
Not even cool things you can do with your lighter, these are all shitty and pointless
Kyou Capps hi
Kyou Capps or 'pointlessly more difficult and complicated ways of doing otherwise fairly simple tasks with a lighter'.
So #3, you took apart a lighter, to make a lighter?
To tru
the lighter was empty
So much work on #3 to make fuck all. #4 could actually be useful though.
It's a spirit burner. They last a lot longer and can be refilled.
The Only Son
“You gotta light?”
“I did, but I turned it into soldering iron, sorry”
LMAOOOOOOO
Who tf just has ethanol in a syringe laying around
R.i.K.o BeatZ pyros
@@fdss-el6lt tru do
Hahaha,
All kinds of creepy old weirdos
hardcore alcoholics who want to get drunk really fast
Anyone ready to shoot some up to get drunk
I got a lighter hack for ya, I put Velcro on the neck of my bong and around a lighter, so I always have one with the bong.
U r a fucking genius
Hi, I'm with Yale's recruitment team.
Son, do you want a scholarship?
Nice
Ingenious
Fucking wizard
I feel like I just watch 5 lifehacks for meth addicts.
I was going to say this guy would be awesome in jail...
lmao that is too funny.
Chubbysumo xD
funny I was thinking he must have just got out...
Chubbysumo that lighter hack with the really long flame looks awesome
Meth heads can do some pretty amazing things.🤭
Bahahaha
Or crackheads... I’m surprised they didn’t use the paper clip to form a secure way of holding a “cigarette” over the lighter for a long time
@@idkyaknow593 crack head
A crackhead too
🤣😂🤣😂🤣😂😂🤣😂🤣
I want these 8mins of my life back.
Tony Tomasso Well, too bad, you cant have em. All of us want our 8 minutes back.
Nope. I liked this video actually.
Tony Tomasso same here I wasted my time on watching this
Heres a lifehack for you! Dont watch “lifehack” videos
Just like Hans Moleman, you'd probably waste them anyway.
8 minutes i will never get back....
That's what the speed option is for..it can make upto 4 minutes out of it
So on the third one you took apart a lighter, to make a more crappy lighter??
i think he will show how to build a lighter without gas
Ok so the idea is, "lighter dead? no sweat. Just get a plastic bottle, scissors, a bunch of cotton, electrical tape, a soldering iron, ethanol which everyone totally has lying around & build a new one"... Or just spend a buck & get a new lighter. XD
xSlappykinkaidx or less for some matches!
it was a more like a way to start a fire from the inside of a building. throw it threw a window for no arsenic trace.
it was a more like a way to start a fire from the inside of a building. throw it threw a window for no arsenic trace.
The soldering iron one is the only one that's somewhat useful, saves me like 10 bucks for an actual iron
wifebeater69 it doesn’t even work, a lighter would never be hot enough to use as a solder they probably used a torch
No. 1 has a high possibility of a hospital visit as an end result. No. 3 will most likely melt the plastic bottle and in turn quickly ignite the ethanol soaked cotton. Possibly burning down your house if no. 3 is left unattended.
Both will give you a good story to tell people who ask you why you look like Deadpool or how your house burned down.
#3 is a fucking molotov cocktail lol
@@AlukardTVK no it's not
But that's ok....
@@asmodeusasteroth7137 tis a joke bucko.
how to make a shit DIY lighter out of a working lighter
that is just in case the lighter resevoir is broken or need more bigger capacity of gas but thats not necessary to have a bigger one but if you have a broken resevoir then this would be useful
This is also useful in survival.
The ElectreKid because I'll need to be able to solder in a servival situation lmao. Not one of these is useful in a servival situation
Andrew Miller what if you dont have a solder and practically a solder needs electricity so you need power supply of course you dont want to waste ur time looking for one when ur starving. (unless you do the tutorial in making the lighter as a solder but there is no connection on about that cotton lighter I'm saying bruh)
the term 'life hack' is over used. it's just pointless modifications that you're never gonna use
5:58
Ok now that's actually a useful one
Lol
Well actually it is
If you need to repair your phone, to order more crack
Youre not supposed to leave a lighter on longer than 30 seconds
@Ex Gamer I'm gonna take a guess that the fire is too close to the fuel source and will explode from too much heat
4th one was useful
I agree
What type of metal?
Khalil Perry soulder
la science au service de la ste
These guides should me named "how to destroy everyday items, while wasting your entire day to replicate items money can buy for dirt cheap".
can you please tell me why you just sautered a negative wire straight to a positive wire?
For examples sake
Thank you comment section.... Thank you lmao 🤣🤣😂 🤣
Indeed.
Wow! What a complete waste of my time! Thanks!
Christian Olivera lmao
😢
Riley Sellars p.
Christian Olivera and u wasted it more by typing ur comment u knew it was about lighters what was U expecting really a bloody Mac Donald muk bang
What were u expecting
lol I thought I was watching mr gear 😂
Me to
Mat Pat me too
Me too
Mat Pat me too
Mat Pat yes mee too
Thanks for sharing 👍 instead of gadgets that only direct fidgety fingers around in circles that gives way to nothing really, you came up with something from what others would have not considered doing anything with. I may not use them all but there's some I'd try out. Either way, it's got my gears going and wanting to piggyback my ideas off of what you began. I love the crazies and the creative in spite of the tone of "wtf" that's bound to be expressed by the uninterested (pretty funny too though once I'm done being defensive lol 😅)
Stop hacking my life and breaking my lighters Carl!
I know an even better lighter trick
Step 1 put gas all over your hand
Step 2 light
And tada your hand dissapears
joe smith good comment really helped me 👍 thankq
Good one xD
That’s so fucking hilarious
Hajajaajajahah0
joe smith your profile agghhhh
its not a hack if there's no purpose....I just wasted 8 mins of my life
Scott McKinstry the sauder lighter one has a purpose
2016: Hell Nawl
2017: NO
2018:nooooo
2019: Okay Damn Here
Soldering iron trick is amazing and will save me out in the field at some point for sure trying to see if something works at an Electronics fair or whatever that's amazing thank you
The mini soldering pen was kinda cool.
instructions were unclear i stapled my forehead
Zehvz yeaa@aa
Zehvz lol
Zehvz lol
Dang same but I stapled my pecker
You killed it bro.
Im more amazed at the fact that you fully straightened out a paper clip
🤣🤣
Cool, 1 question. What's the name of that song with the whistling,its stuck in my head
the soldering hack is really good one
kris that soldering job was a really bad one though😂😂 Probably just invest in an actual soldering iron if you're going to be doing any soldering on any wire larger than what he did, and if you're going to be soldering more than once in your life. That would be a huge pain because the paper clip would cool off so fast you would most likely never be able to finish a solder in one heat, btw, don't cold solder like that.
number 1 and number 3 are very unsafe. because most lighters are not supposed to be held on for more then 30 seconds or else the flint that is used to make sparks super heats and explodes.
you can see a demonstration if you take apart of lighter and pull off the wheel and see a bit of metal with a long spring.
light this to red hot and throw it on the ground and it explodes with a bright light.
number 1 hold down the spraying bit causing heat to build up. and number 3 using a cotton wick so close to the igniter is the same principle.
number 2 is just how tweakers light up meth.
number 4 as a make shift soldering iron is actually pretty good.
unsafe but good.
cheezandtoast #4 is just for use in a pinch
Since when have we cared about safety
I️ was like that’s not safe!
cheezandtoast I was actually freaked out waiting for it to pop lol.. It happened to me when I was younger
I see no use in doing any of these things.
Liked the vid, some of the hacks are useful. Thanks
With the first hack how can you touch a fiery hot nut/bolt to twist/adjust it back so flame stops? Maybe strong lungs will blow out the xlg flame. But fluid will still go on releasing...
"And then, Dave, thinking quickly, made a megaphone using only a squirrel, a piece of string, and a megaphone."
when he covered up the apple logo, I thought that hack was done. Was like "wow, what a neat hack!"
🤣🤣🤣🤣🤣
Number 4 is actually incredibly useful
Can you imagine living the life of a lighter and life being so easy with these hacks?
#2 caused my friend to burn his beard.
Rod Kali that's right it's all fun until someone loses an eye
I can't believe I just wasted 8 minutes of my life watching a 5 year old play with lighters and a glue gun he found in his mom's pantry to make larger, more flammable one time use plastic flamey things things that will melt immediately because of terrible engineering. I guess I'm the fool for thinking this was going to be more than pre-school playtime.
Christopher Salvi hahaha it says "hacks", not "scientific revelations with lighters"
Since when does hacking something mean making it shittier and less useful?
Christopher Salvi would you like it if someone said you look like a prschooler when do stuff. I'm beating that you'll say no
Christopher Salvi jipurp
doof
fhoo
fhoo
xhnn
bhmbnhurumgsngdhdfnuerjsbgeekricnhdf gsu
Bilbo Fappins I lol'd at that hahaha. bravo & kudos to you, Mr fappins
Good job Wearex, that was some impressive lighter work.
Why is a farmer always a pillar in is community?
Good video I must say. But seriously that beat from the end of no.3 video leading in to no.4 video was so HARD lol. Beat was a banger lol
Npc
hey man have u copy first one from Mr gear I am right
Act Station yea I saw this first one before
true
Rob Playz true he copyed Mr gear
Yunus Hussain
Act Station yeah!
Please google the word 'hack'.
Some people got way too much time on their hands, especially number 3 lol
The first step is perfect for when i do herion thanks for the video!!!
4 and 5 are the same.
Wow, that soldering one is actually really good.
Chupachu ikr
The soldering iron is by far the best .. did it myself and it worked like a charm
The music change at 7:20 scared the hell out of me 😂😂
As a life long smoker, of various different things, I guess this guy doesn't know that black plastic near the sparker melts and would ruin any of the work you just did.
Bro I build the beast of a beast that could withstand that 😆 stoned shit less I got the notion to try it do to the fact we were having a power outage and no candles ....I used copper pipe fittings along with brass fittings.... they were bad ass all you need that is not metal I'd the pull out top from a clipper the one kind that has the packing tool/flint holder combo dealo..... they are bad ass I'm working on making a few larger ones that will be tiki torches for the yard with thier own sparker on each so you can just walk by and swipe a finger 😆
last one would be useful for making homemade bongs, the paper clip thingy could make a perfect sized hole.
1:26 getting high on lighter fluid, I am very intrigued, sounds amazing
2:45 background music: Mein bizeps brennt
Dachte ich mir auch 🤣
Jaman😂😂😂
Watching these life hack videos makes me feel like I am the only person in the world without a hot glue gun.
I know right? I feel your pain
I'm early, better make a joke... Never mind, this video is to lit to make puns at.
FFFFFFFFFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
Fangame Empire *insert comedy gold chowder meme*
The fact you just mentioned Comedy Gold from chowder shows me there are still good fans of those awesome ass old cartoons on YT and the internet, I love it.
Feel like i just watched an episode of MacGyver ! I liked the welding/soldering, done w/cig.lighter. Gr8 !
My girlfriend and I love the channel, subbed. :D
#4 would produce a "Cold Solder Joint" this is week and in many cases will increase the resistance of the wire. You have to flux and heat the wire a you apply the solder. I must say #5 was pretty cool as cutting foam is a mess and if you need a small piece its hard to do.
It wouldn't. It's flux core solder. You can tell from the smoke and because it wetted properly onto the wires.
These are not "hacks." It is just things you thought of when you were really bored. 1 is contrived as shit. 2 is a neat trick but not a "hack." 3 is a complete waste of time, and 4 and 5 are the same thing which is taping a metal thing to the end of it.
W #1, keeping those cheap lighters lit like that will cause it to mealt the plastic that holds the spinner that rubs the flint
#4 was actually pretty slick & useful
Very Cool! Especially the makeshift soldering iron
No.2 Mein Gott it's a lighter from Harry Potter
Ya know you could always just use the lighter like its supposed to be used.
That first "hack" is a great way to blow up or at least melt a lighter. Not too bright!!!
I just want to know what the first song is
The music was pretty annoying, but after I muted the sound it was good.
Chris W. It reminds me of rugrats
Mein Bizeps brennt
...
Kommentar des Jahres :D Lachflash des Todes!
young tyrus nice profile picture mayne
Daniel_AK-47 thank you👊
young tyrus hahahaha
the crafty guy akhna
There's really not a point to any of these things. You use a soldering iron to make holes in a bottle cap but then use a lighter and paper clip to melt solder in the next "hack".
The soldering one was actually pretty good
the first one takes more effort to do than to actually light it normally
just finished watching and i wanna go get checked for stomach ulcers
William Smith its meant to be used as a stand torch
William Smith
Your a dumbass it's so it stays on with out you having to hold the fuel down, not just for lighting normally...
Not to mention the waste of gas
Willeexd You could just use a piece of tape to keep it on...
Im trying to play game of war put this one player keeps kicking my ass
Timi Askolin is it legend27
BALLISTIC 03 Yes, the legend 27
That is pretty much a dead meme at this point.
what does that have to do with anything
TimiAsk X pp
does someone by any chance know what the song is called?
Crazy I’m in love bruh I can’t stop watching
OK, that soldering iron one is pretty cool
Should title this 5 pointless creations that take 3+ hours
Jack Stirling The soldering iron will take 3-5 mins.
Nice beat....love the production
I can't wait to use #4 😆
What did he do on the second one? Blow ink into the lighter?
@@BrickForSheep Wish he lit his head on fair after doing that, it would have at least made this video interesting.
#1 best way to blow it up
D Angel how to burn your fucking house down
Eviktion lol
Finally my Life makes sense again
I found my dad's old flip lighter and he said that I could have it and I am loving it
Apple sells lighters?
yeah but they will only light apple brand cigarettes.
TheKrensada😂😂😂😂
U
Yes
Smart lighters?
Bitte noch ein Lifehack dazu wie man sein Bizeps zum brennen bringt
ab 2:44 hauptsache es kommt der beat von „mein bizeps brennt“ 😂😂😂😂
Awesome tricks. Especially the soldering and hot knife ones.
all these are pretty cool ideas
You are just wasting money to make things that you can buy for a cheaper price
Best one for me is soldering iron followed by hot wire cutter :)
Could you teel me, what the title this song?
how to do the second?
Prolly just look up "How to make a crack lighter"
"buy a candle"
Druid and how thw fuck are you going to light the candle?
No.2 was dope asf
what size on the bolt and nut?
the fluid will wear out the tape it will fall apart and catch alot of shit on fire ive done this
you better thank me for watching 😩🖕
but how does the second one with the ink work?
In the fist one I though he was gonna light up a joint😂😂😂