Ultimate Axial Bomber - Completition - Ep6
Vložit
- čas přidán 17. 10. 2020
- Transforming the Axial RR10 Bomber into the ultimate version of itself is going to be an in-depth conversion which will get into every single aspect of the vehicle. Episode five finishes upgrading the axles with some of the strongest parts available.
High Altitude Performance Facebook: bit.ly/2ScURXh
High Altitude Performance IG: bit.ly/2KCNhRE
Vanquish Products Stage 1 Kit: Links Below
VP Site: bit.ly/2M9eagA
Amain: bit.ly/2BfOCMJ
Vanquish Products VXD Rear Axle Shafts:
VP Site: bit.ly/2WGF7gT
Amain: bit.ly/2ZT1geM
Incision Machined Gear Set:
VP Site: bit.ly/3atWUMY
Amain: bit.ly/3eAAA6N
Vanquish servo horn:
VP Site: bit.ly/2XF0ijw
Amain: bit.ly/2MfQtUg
Tekin T360 Servo: bit.ly/36JGL5X
Tekin RX4: bit.ly/2zL4LcJ
#axialbomber #bomberfab #rr10
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc
My Camera/Production Gear:
Sony A6400 Camera: amzn.to/2K0ixt1
Sigma 16mm F1.4 Lens: amzn.to/2Y9TQj2
Audio-Technica AT875R Microphone: amzn.to/2YcVqR7
GoPro Vlogging Rig: • GoPro Hero 7 Vlogging ...
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un - Auta a dopravní prostředky
There’s no comparison to stock bomber but I would love to see a side by side running/trailing video like you said for visual purposes...
Building one myself and would love to see that too.
I agree, comparison videos aren’t always the best way to gauge performance, but they are still fun to watch. Thanks again for the info.
Have you ever done a video on cleaning your rigs after use? That’s one I would like ti see
Definitely do the comparison video! This was such a cool build.
I’ve been looking into these bombers so I’m looking forward to the comparison thanks for the videos man really enjoy them
That is shaping up to be a epic build. Nicely done bro
I am really looking forward to seeing some running video of this. What you have done with it are some significant changes, I think this is going to be an awesome rig!!!
there hasn't been one still or has there?
Cant wait to see it out on the rocks. I had a roc412 in my old wraith and that thing on 3s was damn near uncontrollable.
Good stuff fam definitely ready for a run vid 💪🏾💯
I had that driveshaft problem and I found Integy makes a longer aluminum spline. Works great.
Awesome build!!
That esc is rad I think all my vehicles need one. Thanks for the video
Great Series! I got a Bomber V2 and did a fair amount of these upgrades. I didn't do any of the High Altitude upgrades, a little advanced for me but they look awesome. Well done
Hey dude, great series, please let us see this baby out on the trails!
I picked up the high altitude steering mount. I'd love to go full out with his kit. Maybe someday.
I’m running the string servo mount on my wraith, I got the incision link set and the front upper links mount to the front of the servo mount as if it was meant to be! I’m glad too because those link you guys make are works of art! I bought the servo mount after I seen you install it in your bomber! You’re a big instigation to me thanks for all the great advise and how to’s much respect sir!
Try dissfuser next to your shocks they help in slow shock return less bounce an more control over them bounces
Do the comparison! Fun to see
This is one of my favorites:) Good times Brother:)
Awesome Bomber!
thanks for the update
I would like to see the comparison vid. It’s always nice to see the performance gains. Also do know if that servo mount would work on the SMT10 being that it is the same axle?
Hi im a newbie to ur channel love ur vids man 🤟👍🏻👍🏻
Gotta try some of those settings on my Bomber 2.0 although I do run a lot of Tekin esc’s (all pure race stuff RX8, RS pro/RSspec etc) I actually use the Castle Mamba X on all my crawlers current have the Aux wire plugged in and setup to do dual personality on my Bomber race mode throttle normal brake reverse (no drag brake) flip the switch and it’s throttle reverse let off and it goes to full drag brake still need to play with brake strength settings
Thats a fine rig...I would love to own it! Did you program the servo too ?
I love a to b comparison stuff. We all know lines can change and that will be obvious to you and the rest of us. Do more side by side comparisons and I think you will be impressed with how much it really does show a difference and translate to film as well as I think you will be happy with the performance it brings to the channels analytics. People really do like that know and of stuff and I think that's why rc review has been seeing a lot of growth
Is there a running vid of this? I just finished putting Dlux fab trusses on my og bomber kit and I’d love to see this thing running.
I know I am quite a bit late to the party but I wanted to share my experience with this upgrade as I jumped into doing the same build as Harley did. My only differences were in the electronic choices as I went with a Mamba X and Holmes Hobbies 540 3500kv Puller Pro and Protek 370tbl servo. The build isn't too bad but there are NO instructions at all for skid and transmission. You won't get any from emailing High Altitude Performance either. Even without, it wasn't much of a pain and I found that Casey @ High Altitude was very responsive. My main gripe was trying to make sure the right screws are used in the right places. I will tell you that the longest screws with the unthreaded back halves are for your lower links.
You will need to follow Harley's parts list very closely, something that I found out the hard way a few times. All in all, its not a terribly hard build but the performance gain is incredible. I built my for crawling as the main use and after the changes to the LCG setup, it is almost as good as a cheater build, every time I have had it out, people can't believe it is a Bomber pull those lines.
I will say that if you are planning to use it as a crawler, ditch the sway bar as I have found that it was a pain in the ass to keep it attached and it was really restrictive in the rear movement. I have had NO issues without it as a crawler. However, if you are intending for more U4 racing, that sway bar is a must but I have had little luck keeping the Vanquish sway bar from just coming loose.
I have run this build over 12 times and at least 40 hours of use and the skid has held up under moderate to heavy crawling on Granite, river rock, and Sandstone with no issues here in California. If you were thinking about taking this project on, I would highly recommend it as it makes the Bomber a real contender.
Looks like a great performer, if I only had the time to build one myself.. 🤔
Do the comparison video against the stock bomber!
One quick question about the Vanquish Axles and the larger 5mm wheel shaft, when not upgrading to the Vanquish wheel's would you have to drill out the center bore?
I also was wondering about the front drive shaft needing to be replaced with the extension have you done it and what did you use? Thanks for Sharing all the upgrades and part's used on this build I'll be back as budgeting allows to follow the link's in the description
✌🤠👍 HFLPRCing 👍😎👍 AOAH
🙏 SSPH ❣️
Oooo. I do LOVE carbon fiber...would LOVE to slap some to my VS4-10 ultra. Are there any available?
What are your thoughts on the Axial Bomber vs the Axial Capra? Do you have any preference between the two of them? I am interested in getting one but not sure which one is the better buy for your money.
Nice truck! I'm not a big fan of tekin. I like castle better. Which is your usual go too?
I would also like to see a side-by-side comparison of the stock bomber versus this one.
Your shelf is crooked but not that one tho
Your shocks aren't plumb
Your lower links aren't level
Your corner is a mess
You have too many boxes again
And it's about time you got back to these types of videos again 😂😁😋
What type of lipo are you running? Do you think a 4s lipo would fit in a Bomber?
did you ever make a vid of it running and what did you do with the drive shaft problem ?? being to short
Ooooooo a budget build!
Did you ever do a running video?
Comparison video sounds good
Yes it does!
Agree! but dont compare to a totally stock bomber, remove the back wheel, add sway bar and change the steering links at minimum
Would be nice to see if and how the high altitude forward motormount (w/o skid) fits an Axial Scx10 chassis. Should be a noticable performance update
HAP makes a fmm for scx10
Do a side-by-side running video!
whats the best axle shafts for a scx10, i cant find the vanquish ones in stock anywhere =(
josh toby is it ok to use 18awg wire for the lipo batt ?
I Love my Bomber!
But where did you end up putting the receiver for radio??
nice Video...
😍😍😍
👍💯💯💯💯
🤜🤛
🤝🤝🤝
Great, actually awesome, build as usual. But man its painful to hear the air in those shocks every time you squish it down…
Josh, although that setup is well out of my Range - till next year...
I can assume that Front Servo Mount also fits a Wraith??
I'd LOVE more travel up Front. HOW would I get one?
You're really building a KILLER Rig Brother!!! 😎👍👍
Carmine ✈🚂🚙
He tells you who makes it: High Altitude Performance. Use your search function.
Yes. Show a comparison.
where is the running video of this thing?
Surprised no v2 axle housings. I need to get out and run my bomber for sure
It may happen in the future but for some of the events they don’t allow non-stock housings.
I like that rear sway bar. I'm an axial fan. Why do you hate spectrum?
I don’t hate Spektrum but I feel like Futaba is a better choice.
Can u do a bomber run video
Come on man, we watch 6 episodes of this thing and no running video!?!?!?
josh tobyT MY FRONT DRIVE SHAFT IS TO SHORT I DID ALL THE UPGRADES NOW WY WOULD IT BE TO SHORT FRONT DRIVESHAFT ANY SUGGESTIONS WOULD BE GREAT?
The trans just put the output in a different spot, just need to use a longer shaft. You can use axial parts and just use longer portions to handle it.
I can't find the final episode? Running footage?
He only sells An does upgrades from his store , he doesn't play with them look at cleanliness in back ground
@things of doing I thought I heard him mention several times he would be running it later to show everyone how it compares before and after
I talked with Randy a few days ago and as of right now nobody has dibs on his Bomber which he’ll be selling after 2021 KOH for 150k .. so there you go if you want the ultimate bomber 😬
so about $800 in addition to the purchase of the bomber?
Hmmm, probably a little more than that.
@@HarleyDesignsInc thanks
Completition hmm new word
Your working on a savy my blue one is the bomber with all your tech you should read the side of vehicle 🚑
Lets make it easy. By Likes or comments who whats a comparison video?
Grand total 3346.00 dollars
This has only taken what, 2 years now? Haha
177 days from first upgrade until now 😁
@@HarleyDesignsInc Ah my bad, I was thinking you started closer to when the bomber came out.
I did one then too, but that was 5 years ago! Time flys!
👍🏽🐒🇺🇸
You’re not a stock kind of guy🤣