Dyno Testing Ported Eaton Mods - Search for 600whp Eaton
Vložit
- čas přidán 5. 05. 2024
- Limited Availablity! 15 Spots Total for Dyno: mustanglifestyle.net/products...
Mustang Lifestyle Dyno Day, Car Show, and Parts Deal Day: / 417573544556144
ML Key Tags: mustanglifestyle.net/collecti...
Discount Codes:
MUSTANGLIFESTYLE 10% Off at freedompartsoutlet.com
MUSTANGLIFESTYLE 5% Off at steeda.com
ML7: 7% Off at bmrsuspension.com
MLSLTH: 10% Off at longtubeheaders.com
MustangLifestyle 6% Off at lethalperformance.com
Mustanglife11: 10% Off at boostane.com
MustangLife: 6% Off at www.jlttruecoldair.com
MUSTANGLIFESTYLE: 10% Off at sctflash.com
Equipment Used:
Canon 80D Video Creator Kit: amzn.to/34QsRNI
Canon G7X Mark II: amzn.to/2O56L4r
GoPro Hero 7: amzn.to/2O3TI39
Macbook Pro 15" Retina 1TB SSD 16GB Ram 4GB GPU: amzn.to/2O5Do1C
Mustang Lifestyle Decals Now Available! mustanglifestyle.net
Like us on Facebook: / mustanglifestyle
Follow us on Instagram: / mustang_lifestyle
Follow us on Twitter: / mustanglifetv
Follow the Team:
Andrew: @MrAjsTech / mrajstech
Ash: @Ash_Carlton / ash_carlton - Auta a dopravní prostředky
He is right. I have seen some Eaton cars lose power when adding aftermarket cams. I believe thats what happened to Jordan Millers Cobra, he lost power with Comp Cams and thats why he made the swap to a 2.3 Whipple. Definitely some interesting research.
It's because the blower itself is the restriction...the cams gain power up top and lose it down low and up top is where the little Eaton can't keep up so it makes sense. It's similar to when guys would put a big cam and heads on a gt40 stock bottom 302 then saying damn it's not making much power to have such a big cam. It's because of the intake choking the combo off. This is no different.
I have some interesting theories that came to light when talking to an engine builder about my combo and why some cobras make more power than others for no explanation other than because reasons…. But there could be some good reasons for this. It’s something I’m going to cover in awhile
Whipple 2.3 is a stout little blower and a terrific upgrade from the Eaton setup. 600whp is easily attainable.
Did you guys notice on the first pull that flames shot from the tips? Cool! Love the Terminator content. 👍
The wheels with the red are nice combo
Tell ya 600whp is just about right. You’re making more than 98% of cars in the road. You start climbing that hp latter and the more you make the more you break.
Facts.
Jokerz ported blower, elbow and throttle body, 98 cobra intake cams with a 50 dry shot. Letter rip tater chip!
Really enjoying all your video’s loving the Eaton terminator stuff. Just bought my 2nd terminator 2 weeks ago to stay irs,6 speed, blower car got the itch from watching your videos keep it coming
Spray it! The nitrous will be so much fun.
Very cool content, simple dyno fixes aren't in the cards for these Cobras, Cody has a very great looking
Cobra, super clean.
Getting 600 out of a ported Eaton is going to be very hard
Put it on the bottle!
just get a metco aux idler pulley, it fixes the belt slip
nice car man good job
I loved this!
Loving the Terminator content!💪🏻💪🏻💪🏻💪🏻💪🏻💪🏻
In for track videos!
love the Terminator content!
Termi content going hard!
Oh yeah
Love ya passion for mustangs awesome vids as always!!!! wish I could come out there for car meet unfortunately waiting on transmission for my 13 second gear gone might say F it an pull up that’ll b my bday present to kick it with da crew.. may 25
Love the eaton testing!! Makes me want to pull my pile out of the garage lol. I'm genuinely curious about the mystery power drop. The shape of It reminds me of some old oil pump cavitation vs flow graphs and how the GPM of oil flow would start to trend downwards with cavitation. This same thing happens in diesel HPFP systems when the HP-fuel pumps inlet starts to become a restriction, and the flow trends down in a very similar shape and manner... I'd be curious what the lb/min of airflow is doing when this happens, like does it happen at a specific lb/min and just kinda sit there.. Either way put some nitrous on it!!
Glad you still have your Cobra Chad
Back in the day I made 550rwhp/550rwtq on an ancient stage 2 steggy. 2.8/4lb combo. Full Mac exhaust. E85 21deg timing. That was fun and reliable. What is the plug gap? you can hear the blower nose over on all the pulls minus the one where you slowed it down. I'd bet belt slip still. Hog out the inlet more than anything. Posi had some great posts on SVTP back in the day about it.
Similar numbers to what this did before - 538 / 590rwt. Plug gap is .026.
The lay over up top is the soft limiter starting. We are definitely going to experiment more. Going to see how my cobra responds with built motor and cams with similar blower and pulley combo
This was an awesome video. Love seeing all the ways and theories to squeeze more from the Eaton. Hope you guys do more with this. As far as adding nitrous I’d say no. I’d just like to see what it can do just on the blower alone
Well cool thing about nitrous and standalone is it can be switched on and off in a second. We need to get you off that stock ecu non sense
@@MustangLifestyleTV Maybe sometime. For now the power level exceeded what I was expecting and once the new pumps are in I don’t really see the new to change anything else. I want a car to drive and enjoy and not always fuck with it like the last one. Plus we only have 6 months of decent weather and the other 6 is too cold to mess with it in the garage
Spray it. Spray it all
Need to get some concrete laid down around your shop brotha.
Some big changes coming soon
@@MustangLifestyleTV So glad to see you growing and growing, always liked your videos, entertaining and learning at the same time, best of both on this channel.
I have a 2.9 in my garage lol
Gen 3r max effort kit and a fuel system and exhaust what numbers would you make
Spray it at throttle body 100 shot
I’m pretty sure your supposedly to take the pulley off the billetflow hun before trying to press it off right? That’s why it bent and crushed the pulley.
Nothing to grab without the pulley
@@MustangLifestyleTV The Metco pulley tool includes a smaller horseshoe intended to remove a pulley hub by itself. This small horseshoe attaches to the main horsehoe using the provided small hex bolts.
Heat the hub (only) up with a torch and start pulling on it. It'll come out. You're the boss not it, now go get er boys.
Do you ever do Kenne Bell swaps?
Isn't there anything that you can do to increase belt tension without changing the blower or lower or upper pulleys?
I had to cut my hub off! That tool just doesn't cut it... it's very frustrating!
Is there a reason that you guys just don’t put a whipple on it or are y’all just trying to get all the information out on the Eaton setup. I love this content guys.
the caption says *eaton* they’re trying to see why the power dies down on a stock blower, what can they max it out at… etc no whipple
Cody and I both have big hp cars. We are having fun optimizing this ancient setup. Finding the quirks and having fun.
What rims are those ?
Dang what wheels are those I been thinking going white wheels for my 99 gt that’s red fire but those would look good too
XXR wheels
@@mikej9932 you know the model
I think 526
I have a dragon throttle body and plenum if Cody wants to try it for sale or trade.
Yes message me please
@@MustangLifestyleTV How do I send you a message?
@@003Mach1 407-680-3494
@00Mach1 interested on the dragon setup. Still available.
The stock intake with the k&n fpik kit works the best over that jlt , i use to have that jlt and I picked up 10-15hp over that jlt plus the stock tube is bigger
We ran it open throttle body and saw zero difference.
The initial Dyno number of 500. Can you tell us the exact setup on it?
2.76 upper 4lb lower - steggy ported Eaton, fuel system - e85, stock elbow and tb, ms3 tuned by me. Stock manifolds with x pipe
@@MustangLifestyleTV ever get numbers on 93 with that setup?
“Bud”??? Dont call him that
You know gas is shit theas day's pump gas not e but gas back in the day had more good shit in it
Not 26 degrees good lol