That bike was built with 29s as it would raise the exhaust tip off the ground higher just threw the 26s on for a first start lol couldn't lean right with them as the pipe was only a inch off the ground with them 29s now with maxxis hookworms
Man that thing sounds great. I thought tillston carburetors needed a vacuum line offa the crankcase? I know I spelt the name of the carburetor wrong sorry guys
Я помню, что ездил на скутере, раму которого сломал. Я её переваривал несколько раз, но она постоянно переламывалась. Нечто подобное случится с твоими позвонками, если будешь ездить без амортизаторов.
@@600bubba I have a felt faker and no mounts are part of the frame I bought several billet mounts and they do not set the motor right, you have the correct ones I thought maybe you would be of help thanks anyway
This engines well built. I’m guessing Billet case? What crank, piston, and cylinder do you use? Kind of curious on every part you have on that engine except exhaust.
Awesome bike. Nothing sicker than 3 spoke mags.🍻
The reving tickles my brain
I like that exhaust short like you have it. Going to breath better at high end. Im also building a 29in tire setup but going to run a 9t on front
That bike was built with 29s as it would raise the exhaust tip off the ground higher just threw the 26s on for a first start lol couldn't lean right with them as the pipe was only a inch off the ground with them 29s now with maxxis hookworms
Man that thing sounds great. I thought tillston carburetors needed a vacuum line offa the crankcase? I know I spelt the name of the carburetor wrong sorry guys
Thats a 324a no line gotta drill a Corresponding hole through the intake and center of the reeds kinda tricky but its still a pulse type carb
Where did you get headlight does it run off a 12volt battery?
Nope traxxas 2 cell lipo a buddy made it for me
12 volt battery most likely
Я помню, что ездил на скутере, раму которого сломал. Я её переваривал несколько раз, но она постоянно переламывалась. Нечто подобное случится с твоими позвонками, если будешь ездить без амортизаторов.
0.002 mm clearance :D
fr sick build tho
Sounds Nasty Nice
mate I think your pipe is gonna scrape! 🤣
Never has as I said in the video I planned to put 29 inch wheels and 29x2.50 tires of which raised the bike up 6inch more why you not put 2+2 together
Cause two plus 2 is 6😂
Jog pipe?
Pipe
What kinda carb is this?
Tilitson 324-a
Отлично работает!!! Где можно купить такой мотор? Я ищу для фэтбайка хороший мотор. Помоги брат!
Этот мотор форсированный своими руками такой не купиш только сам если доводить штатный мотор до ума
Yo quiero que mi bicimoto tenga luz
What's the headlight off of? Or where did you get it?
Cafe light re wired and new leds of my choice I'll do a vid on it soon can't link because it's too many links to build
Where you get those motor mounts from
@@600bubba I have a felt faker and no mounts are part of the frame I bought several billet mounts and they do not set the motor right, you have the correct ones I thought maybe you would be of help thanks anyway
@@stevewilliamson8400 you need a 1.65 mount from cdh this motors mount is the motor you need the 1.65 or a 1.55 bored to 1.65 cdh usual has them
Jaki gaźnik
This engines well built. I’m guessing Billet case? What crank, piston, and cylinder do you use?
Kind of curious on every part you have on that engine except exhaust.
It's F50, Chinese copy of soviet D5 engine