Tekno EB48 2.0 Electronics Install | Tekin Builds Ep. 23
Vložit
- čas přidán 20. 09. 2021
- Part two of the Tekno EB48 2.0 build! Time to install some electronics and get this car set up for the track. We are going with an RX8 GEN3, T8 GEN3 1900KV motor and a T-250 steering servo. Battery is a Tekin 4S 6500mAh Power Cell, look for those to officially release soon!
T8 GEN3 Install - 0:56
RX8 GEN3 Install - 2:43
T-250 Install - 3:17
Soldering - 4:36
Radio Calibration - 8:39
Servo Setup - 10:41
HotWire Tuning - 14:59
Ride Height: 19:25
Team Tekin teamtekin.com
RX8 GEN3
T8 1900KV GEN3
T-250 Servo
HotWire 3.0 BLE
4S 6500 Power Cell
Tekno RC teknorc.com
EB48 2.0 1:8 4WD Electric Buggy Kit
Tekno Shock Tool
Pro-Line Racing prolineracing.com
Hole Shot 2.0 S3
Velocity 1:8 White Wheels
Closed Cell Foam Inserts
Blog - www.teamtekin.com/news/?p=4457
www.teamtekin.com - Zábava
I’ve got a ET48 2.0. I’m planning to order a RX8 and the 2200kv truggy motor for it. I ran a Tekin RX8 gen 2 and Trinity D8 motor in my old EB48.4 and Tekin has never let me down and the quality is there there is no better !
Hi just got the motor and the eb48 2.0. The motor posts line up at an angle. When you talk about clocking the motor to get them straight is there anything I need to consider b4 or after doing that?
Thanks for the setup. I was considering the Tekno EB48 2.0 - still on the fence. One thing some ESC manufactures do that is odd is not have ABC leads then +- at the end, maybe it is for safety
Depends on the board layout. Keeping our controllers as small as possible is always the goal and that can dictate layout on some of them.
Wish my wire job looked that good 👍
Just takes practice!
Dang I wanna put a tekin in my sct410.3, upgrade on the hobbywing max10g3.. but not sure if I really need to
👍👌
The alligator clip is a heat sink.
Been doing it like this for years and never had a problem.
Is this the truly t8 or buggy
Because of this video and what Tekin and Tekno does for us Veterans... I am sold!!!! The video is what will help me get started on this journey in RC. Thank ou sir!!!!!
Thank you for your service and thank you for your support!
@@TekinRacing It was my pleasure to serve... I believe RC is going to help me on my road to health and video's like this make it easier to build and work on these machines. Keep up the great content.
What do they do for us veterans? I am new to this hobby and looking to get into this and building one of these!?
@@missme9247 They offer discounts to Veterans. Get a hold of them for specifics.
@@missme9247 solid discount on product for military members.
Love this buggy! Did take a few weekends to get it softened down for the NW tracks. Ended up with softer springs all around and thicker fluid in the diffs, but still not as fast as Ty's for some reason...
Shhhh, not til the next video. :)
Just got my EB48 2.0 and this will be my first build. Since I was thinking of going tekin 1900 motor and the gen3 rx8, Thank you so much for this great video! You did a Fantastic job explaining and showing things clearly.
Is there any other tips or recommendations You could think of, after this video was made?
Please keep the EB48 2.0 videos coming! ❤️🍻
Thanks for watching Mark, glad it helped you out! One little detail I forgot to mention is that when you fill the diffs with the gears and shafts in the housing there will be air pockets in there unless you let them sit a really long time. Usually the first time you open them back up after driving they will be low on fluid, so it is a good idea to check them after a quick test run and top off if needed.
Question: since your ESC can do 6s, why not 6s 6500 instead of 4s 6500?
Racing Sanctioning Bodies have settled on 4S as the battery for these cars and this is by far the most popular setup.
I’m having a problem with solder sticking to my motor tabs. I’ve had so much trouble trying to solder the wires to the tabs that now there a rusty color.. is there any tips? Or can I get the motor tabs replaced? Thanks I’m advance
Lots of heat and big chisel tip. They need to be pretty hot for the solder to wet and flow to them.
Is hot wire available for iPhone?
I know this an old vid but I gotta have one of those hoodies 2x please thank you! :)
Right here!
store.teamtekin.com/copy-of-3dot-hoodie-grey/
Does this rc kit come stock with the r8 gen3 motor and rx8 esc????
No, electronics are separate! Kit comes from Tekno, we provide the electronics to make it fast!
What tool kit if there is one do you suggest for Tekin builds.
I use a combination of mostly MIP and Vanquish tools when it comes to drivers and wrenches. I also use Tekno shock pliers for anything that need a link end threaded onto it. Pliers and cutters I just grab whatever I have laying around.
@@TekinRacing one more question if you were to buy a set of spare parts just for the future, what parts would be on the top of your list?
Well, I haven't broken a single part on my Tekno 1/8 scales, but I always have spares for pretty much the whole car. Bulkheads, arms, hubs, turnbuckles, spur gears, wing and wing stay would cover most of it.
What transmitter are you using
Spektrum DX5 Pro
Prezzo ????
Truggy or buggy t8?
Buggy size 1900KV.
Macaroni & cheese sleeze
Not sure what that means but I do like me some mac and cheese.
In line motor. •_•
Idk what's going on with the quality of your esc's but mine and 5 other people's died the first few laps around the track....brand new gen 3s....
Hi there. I saw your comment and since I’m interested in going this route with my setup... Can you give more info/details
On the fails? Did you contact them for warranty and if so, how did that go?
Hopefully you and these other people reached out to our support team so they can take care of it for you?
@@markg7393 dont buy, I just came back to hobby and I bought the tekin and I have the same problem that I had 8 years ago, after 4 min, (4 laps) and the esc got fried, now I need to pay to send it and wait to get the ESC back, tekin is a joke, and Im so piss right now, definitely my last tekin that I bought
Yea, definitely my last tekin, that I bought
@@TekinRacing you really need to look it up for this problem, I can’t believe that this happens with new ecs system and this happened to me with 8 years in a part