CX RACING GS300 2JZ GE GT35 TURBO KIT FITS 100 PERCENT.

Appreciate Josh pulling up to help me make some jumps on the car! The CX Racing kit lined up pretty good. Was a nice surprise to be honest. Still have more than a few things left to do but I really needed to make some major progress. So I am very excited to keep making gains.
Kit below at
www.cxracing.c...
Personally I want to use the pipes and turbo but I would stay away from the blow off and wastegate

[@JoshuaGarciaT]

I love the angles!! Whoever filmed this you need to hire!!

[@apexvisiontv]

Homie special with the camera huh 😂

[@Yoogie]

where da update i remember seeing your old videos on the gs happy to see you finally working on it

[@patrickrives4157]

I have this kit and run it, in the process of tuning on the emu black parallel harness as we speak. so far so good

[@apexvisiontv]

That’s good to hear I’m really close!

[@melvingrimes7886]

I have been using the MVS44 knock off wastegate for over a year with no problems on a 76 mm turbo works great can hold as little as 5 PSI if I want it to. That's on a 2jzgte in a SC300.

[@apexvisiontv]

Thanks I been leaning more towards running the 44 that came with the kit!

[@JoyLong]

Did you drill the hole for the oil line yet?

[@nickleafs467]

Can’t wait to see a update was thinking of doing this soon after I get all my seals redone

[@apexvisiontv]

I’m excited! Thanks for watching

[@LexusLegends]

🔥🔥🔥

[@apexvisiontv]

Appreciate you bro

[@TheKomar924]

Finally!!! Is this the final fit and install?

[@apexvisiontv]

Fit yes but I’m real close man

[@apexvisiontv]

Appreciate you checking in

[@angeldiego6655]

How’s it holding up?

[@juniorbangs9823]

Kuuup!

[@angelfilms0]

hey just wonder my stock 2jz 225hp how much hp does this add to a 2jz after installing the kit ?

[@apexvisiontv]

@@angelfilms0 it’s really dependent on tune. Plus the conditions of the engine is always an unknown so I wouldn’t approach it that way. But if you do tune and build it the right way the sky is the limit. You will probably need to switch some stuff along the way

[@angelfilms0]

@@apexvisiontv how much hp did it add to yours after the kit bc i’m really curious and very scared on tune just because it can blow up the engine

[@apexvisiontv]

I’d advise taking the extra time to save then. Do it once do it right

[@angelfilms0]

@@apexvisiontv do u reach around 300-400 hp with the kit?

[@apexvisiontv]

@@angelfilms0 not without a tune.

[@cornolio222]

Looking clean🫡🔥🔥🔥

[@apexvisiontv]

Thanks for watching!

[@dansta3227]

I have a 93’ gs, im 18 and im tryna do this. Any tips and how’s it holding up?

[@apexvisiontv]

Thanks for watching. My advice is buy everything from the start like you are trying to make big power. Perfect example my exhaust isn’t big enough. If I spent the money the first time I’d just go custom exhaust

[@Chalado-Schamane]

I'm from the midwest. I've only seen one first gen GS.

[@payrollantonio]

Could you still squeeze a front strut bar while the pipe is on the way?

[@apexvisiontv]

I’m definitely going to find out! I would think so

[@sk8r9832]

Any updates?!? I’m so curious!

[@apexvisiontv]

Not yet a lot has come up but little by little. Its taken a lot longer than I would have expected but hopefully soon!

[@apexvisiontv]

Thanks for watching.

[@antionefoster5844]

Bro what lbs of boost should I run without tuning it?

[@apexvisiontv]

Tune it asap. Otherwise I wouldn’t go above 5 psi until everything is buttoned up

[@vladimiramador8178]

Where i can find this same kit? And how much u spend

[@apexvisiontv]

Check cx Racing gs300

[@joelcasanova1198]

Do you have a build list or part list

[@apexvisiontv]

Nah I don’t but it’s just a cx turbo kit with tanabe exhaust k sport coils magnaflow midpipe. Stoptech slotted disk with sport pads and stainless steel lines. Some headlights I wouldn’t recommend 😂 thanks for watching

[@wamchrXme]

what turbo kit is this exactly? the link no longer works in description.

[@wamchrXme]

i found one that has an identical manifold and it says it ffor the is300 chassis, is that actually different from the same year gs3s, or is that what this is? its the "cxr turbo manifold intercooler kit for is3002jz gte "

[@apexvisiontv]

@@wamchrXme so you really have to be careful about what you are buying. What exactly are you trying to boost?

[@apexvisiontv]

It worked for me

[@wamchrXme]

@@apexvisiontvtrynna get some power in my 01 gs300 wit the 2jz-ge

[@wamchrXme]

@@apexvisiontv it works for me on my phone (not my pc?) so do you still rec this kit a year later?

[@carter50211]

Any chance of fitting this in an 06? I’m 16 and been saving up and im looking to start tuning my GS. Any tips are appreciated🙏🏼

[@apexvisiontv]

I dont see many 3GS cars with 2JZ. Sounds like alot of custom work. If I could do it again Id go GTE and a log manifold single turbo set up. It can get complicated quick. Good Luck!

[@hawks865]

is this kit reliable?

[@apexvisiontv]

Let’s hope so

[@corporaljohnson8318]

Link to kit....

[@apexvisiontv]

I’ll add it to the description now 💪🏾 thanks for checking in

[@jserrano5378]

Bro cuz ur gear cover is more square butttt u have an vvti iac sensor but I prob have a Rare engine with the bigger rods

[@apexvisiontv]

I will check into this. Would be nice if I do have stronger rods

[@disturbanceworld2431]

Do you got other social media?

[@apexvisiontv]

IG is apex_vision.tv

[@jserrano5378]

Where are you from ??

[@apexvisiontv]

AZ