Tin Can Axe Sheath [ Quick and Easy ]
Vložit
- čas přidán 7. 08. 2024
- The tin can axe sheath is a project nearly everyone can do. It's a simple and effective way to make an improvised sheath that only takes a few minutes to make.
For more information on classes, to check out the required gear list, or buy Merch go to: waypointsurvival.com/
To support me on Patreon: / waypointsurvival
Here's a link to my Teespring Merchandise: teespring.com/shop/WayPoint_S...
My Instagram link: pCC3vPLhDS...
![Awesome Hobo Stove [ Old Miner's Design ]](http://i.ytimg.com/vi/Yl3gxt5tVAI/mqdefault.jpg)
![10 Items You NEED For Survival! [ That you forgot! ]](/img/n.gif)
Line the inside of your can with a piece of old inner tube or rubber roofing to protect your edge. That way you dont have to worry about it absorbing moisture.
yup
Yes, you could definitely do that. I was just trying to put forth a really quick way to get it done. Edit: The piece of inner tube or rubber roofing is a good idea!
@@WayPointSurvival no criticism here, brother. Just looking a little further down the road is all. Necessity is the mother of all invention, but future improvements is definitely the key to smoothing it in the long term.😉
No problem here. Sorry if it came across that way.
I think the steel will take conformation such that it pinches against the cheeks of the blade, maintaining free space between the edge and the guard.
Thanks James for another great learning video for your son , grandson, scout and don’t forget the girls!!!!!
Stay Safe Everyone!!!🇺🇸🇺🇸🇺🇸
Indeed. Thanks for watching!
Dad used to do this with his axes. Back in the day of course you had cans that sealed on both ends. So can opener them both out and you have a open ended cylinder that easily crushed flat. If you chose a can that was deep enough it extended out beyond the edge, no need for a bottom.
Excellent. Thanks for sharing that!
I'm confident that other viewers join me in our deep apprecaition for sharing your innovative ides! God bless you.
You're most welcome!
This is fantastic! Wear it out, fix it , re-use it, make it work or work without!
Indeed!
Good one James, when I bought my hatchet without a mask my solution was to stitch together an old leather belt with paracord to mask it. Thank you for sharing your solution.
That's a great idea! Thanks for watching!
Quick ,easy ,very practical. Thanks
You're welcome!
Really great idea for down and dirty. I love this
Well James you are just full of cool little hacks aren't you. I did get an old axe and I do need a cover for it so I believe I'll use this little hack you just showed. Thank you so much. May God bless you and yours.
Thanks for watching the video, and God bless you too!
The old guys (I am one of them) back home in the States would call this idea "crafty." I like it for an emergency set-up. Here in the Philippines, I scavenge discarded short lengths of DWV (Drain, Waste, Vent) pipe from trash piles next to new construction sites. Most pipe here is very thin-walled, orange in color, and makes lightweight projects. When you have scrap pipe, a heat source, and some free time, it is amazing what you can fabricate. Perhaps, James, if you have not already done so, demonstrate some "pipe craft" ideas for subscribers. I believe YOU are the guy to take things to the next level. Thank you for another great project & video.
Thanks for watching for sharing the Great ideas!
Great tip
I have used for my ax and hatchets in the past was old rubber bike tires and tire tubes along with some strings.
Excellent!
That’s a clever one, James, thanks
You're welcome!
Excellent idea James
Glad you like it!
Awesome and epic video as always thank you so much for making it ❤️👍
Glad you enjoyed it and you're welcome!
Another great one James , Thank you
Thanks!
What a great idea. Thank you for sharing
You are so welcome!
WELL DONE...AGAIN!!!
Thanks!
Thanks for the video Buck-eye. Very informative...
Glad it was helpful!
Simple yet effective!
Thanks!
😊looks good James. Nothing fancy
Thanks, my friend!
Great idea! However, I'm liking that leather sheath/mask you showed at the beginning. I dabble in leatherwork as a hobby (just making things for myself or, occasionally, friends and family) so I have leather and basic leather working tools onhand. Even have some leather thongs so, as simple (yet functional) as that leather mask/sheath looked I think it would actually be easier for me to make one of those than to make the improvised tin can version. I had never seen a leather mask/sheath of that design, before so I really appreciate you showing it!
Excellent. I'm glad you like the sheath!
A great one as always!
Thanks so much, my friend!
I like it. Good Quick & Dirty field expedient!👍 At home, I lucked into a bunch of thin sheet aluminum from scrapping an RV refrigerator; made a handful of axe protectors with that and pop rivets. Once, in the field, I used an old license plate.
Excellent. Thanks for watching!
Outstanding!
Thanks!
Great idea!
Thanks!
Very nice idea. Thanks
You're welcome!
Hello from Detroit Michigan brother thank you for sharing your knowledge and expertise and for taking us on your adventure through time and GOD-BLESS
Hello, my friend! God bless you too!
Great safe idea!
Glad you liked it!
Well done James. Quick and safe.
Thanks so much, my friend!
Great idea great crafting - Save the edge and save the edge from cutting you 👍🏻
Indeed. Thanks for watching, my friend!
Thanks for sharing my friend 🤠
Thanks for watching!
I liked the vintage Collins.
Thanks. It is a really cool old axe!
Great idea 👍💯👍I've been making mine out of old rubber or fake leather basketballs
That's a great idea!
Another great idea. Thanks, James 👍
Glad you enjoyed it!
Brilliant, thank you for sharing this video. All the best to you. Stay safe out there 🤗 👋
Thanks so much, my friend!
Wow....good idea
Thanks!
Hi James. Thans for another 'anyone cne can do it' tuitorial. Stay safe. ATB. Nigel
You're welcome, my friend!
Great little hack …useful
Thanks!
Another winner. Thanks James
You're welcome, thanks for watching!
really cool great video
Thank you very much!
Another really useful/cool idea thanks James !! 👍👍👍
Thanks!
JAMES YOU HAVE A VERY PASSION FOR TIN CANS.
Uncanny
Thanks! Lol.
Another quick and easy hack. Keep them coming sir.
Thanks, will do!
That's awesome.
Thanks!
Define great as you so frequently used it.
It's an intensifier, which means that something is superlative to another construction, which is less so.
@@WayPointSurvival like a folded heavy grade cardboard sheath reinforced with layer or two of Gorilla hide or tape?
Another great idea!!!
Thanks!
I very like this idea, thanks!
You are welcome!
Suuuuper Idea. Yes❤
Thanks!
Good video James , thanks for sharing , God bless brother !
You're very welcome and God bless you too!
Real cool friend!
Thanks!
I’ve made them using old license plates. The soft aluminum is easy to work with , doesn’t rust or stain & the license plates are reflective making them easier to spot in camp at night.
I use bands of old inner tube to secure them.
Great idea!
if i ever had an axe i would definitely do this!
yet another bril vid, cheers james!
Geoff, why don't you have an ax? Do you not need one or ?
Thanks so much, Geoff!
@@___HH___ i live in the uk in an area where there are few trees anywhere for miles round and wouldnt really be any use unfortumatrly! but i guess thats not really very prepper like of me!
@@lonewolfgeoff Hey Geoff. I was thinking I'd give you one if you were anywhere nearby . . . but considering your address, it would be a long swim. lol If you ever had firewood brought to your location, you might need an ax. But if you don't foresee ever having that need, good for you to not have some tool you'll never need. Best of luck to you!
Great video
Thanks!
Watching this channel its very clear that the most important thing in survival is to improvisation
Its not about what the tool is its about how we make it useful
But not everyone is good as u sir 🙏
Thanks for the knowledge
🇮🇳🙏🕉️🙏🇮🇳
Thanks for watching!
That'll work. Thanks for the video 👍
Thanks for watching!
Cool idea, James. I received a few axes from my dad and another from a friend that need covers. Thank you and God bless you and your family.
Excellent! So glad that you liked it and God bless you too!
I did this with all my axes and other sharp tools on job sites! I use the back of axe to smash the can haha
Excellent!
"Not pretty but it works"
Great idea to keep a sharp and shiny thing safe while tranporting when you lose the cover.
Thanks, glad you liked it!
No a bad idea! Thanks.
Glad you liked it!
Nice!!
Thanks!
Great video sir
Thanks!
Outstanding my friend
Thanks!
You are welcome my friend
Steel can just does not sound right, will always be tin cans. Agree? Maybe Im old! speaking of old, at 63yrs old I hope to use all the wonderful knowledge you have given me before i pass this mortal coil.. There is so much, I'm trying but not holding my breath. Love this one and will make one tonight. God Bless James!
Excellent! I will continue to refer to them as tin cans because I too have a hard time letting go of the old designation. God bless you too!
Cool idea, I wonder if there's a way to improve it to make it better, hmmmm. Thx for the vid james
I'm sure you could, if you took time on it. This was just a very quick way to get it done!
Great tip ... I'm learning to make sheaths but still have more axes that sheaths lol and they're all very sharp . I'm always concerned someone's gonna get cut .. I'll definitely use this ... just temporary but much safer. Thanks
Yes, this would definitely not be a permanent fix for most access. But it will do in the meantime for sure.
With all these ideas, I’m putting together a recipe book. If you don’t mind me saying that. Another great idea. Thanks
Thanks for watching!
I made one from the pocket of an old leather vest and a strap & buckle from a Roots backpack.
Not pretty but it works and only cost 30 mins and 4 Chicago screws.
I can't believe so many people thought this was a good idea. Absolutely insane.
Sometimes what seems like a terrible idea to one person can be a good solution in an emergency to another. Thanks for watching!
Burn it out, and use a hose clamp to install either a strip-metal or wire handle and you've got a fantastic cup you can drink from and cook in. Turn the top into a lid and you're golden. Super easy and simple. Because it's pressed/stamped, you don't need to worry about melting any solder.
Yes, they work well for that.
Thank you
You're welcome!
I do like a good creative bodge.
Thanks!
Ótimo vídeo Parabéns muito bom
Thank you!
Good video
Thanks
And bonus chicken dinner..winner winner
Indeed!
I would smash the can flat with a twig in the fold. You could burn the twig out and have a guard that really pinches the cheeks, leaving free space along the edge. Even, poke a drain hole at either end with an awl or the point of your knife. Brilliant idea. Thanks!
Yes, I'm sure that there are many ways that you could modify this and make it more efficient.
Cut a stick, carve a slit in that stick to fit the bit of your axe, use a bit of shock cord and secure it on to your axe.
Sure, that's another way to get it done.
Nice
Thanks!
THANKS BUD
You're welcome!
I've always just used cardboard and duct tape. I laminate the cardboard with the duct tape so there will be no moisture. I have also used material to sew up a sheath and placed cardboard laminated with duct tape on the business end. And had snaps to close it up. Even sewed Carabiner on one side so it clip onto my belt
Yes, those projects can work well also!
@WayPointSurvival well I never thought about using a can. It is pretty slick. I probably would have tried cutting it out And over complicating it had I thought about it. I think your idea is the best probably for bigger axes. I can't help but think when you stand them up it might make them unstable though. I'm sure you could bend the bottom side and play around with it to where it would work just fine for any application. You could even punch a hole on the top and put a carabiner in. You could paint it black, or you could just have a quick and easy down and dirty fix. Definitely knowledge to keep on hand
Interesting hack
Thanks!
Thumbs Up! (I actually need to make one!) God bless, all
Thanks!
Another 🥇
Thanks!
Now there's an idea. That is far better than the cardboard and duck tape I have used in the past. If you want a piece of cloth in the sheathe just soak it in oil and ring it out well. Yould just use vasaline.
You beat me to it, that's what I was thinking. 😊
Absolutely, great idea!
cool
Thanks!
Great video idea! For the sheath@
Here is a suggestion for another video...
What multitool would you reccomend
With pricepoints...
Up to $50
$50 to $100
$100 to $150
$150 to $200
$200+
Thanks so much for watching and for the suggestion. I do have a video from some years ago on the type of multi-tool that I prefer. I go into detail about its uses and why I chose this particular one. I paid $80 for it back around 2006 and it is still going strong. Also, the company will repair it for free should you have an issue with it. It's made by SOG.
@@WayPointSurvival Ide like to see that one! ... I think gear and tools and hacks is info that folks want to see....
Also with links to just purchase.
You mentioned that those hangars were not galvanized... i am anal so I looked up dangers of galvanized in cooking and found out about the burn off is very toxic fumes...
This type of info is very crucial. Most people dont know this stuff... or being carefull
Top Tip: when doing a bow knot, just go around twice and it never comes undone. To undo, same as usual..pull both ends. This is especially valuable in freezing weather..kids' boots and skates.
Great tip!
@@WayPointSurvival You'll never do a double knot again :)
Are you suggesting "tie a second bow over the first bow"?
@@___HH___ No. when you make your first loop and pinch it, normally you would then go around it once with the other lace and then push that through to make the second loop, then draw them tight.
So instead of going around the first loop once , you go around twice and then push the lace through to make the second loop. That is the only difference, that the "going around" is repeated.
That's all there is to it.
Undoing it is the same as usual, pull both lace ends.
Let me know if you get it to work.
I just made one just like you said and it looks just as bad as yours does. LOL. Great idea and I feel safer now. 😁
Indeed. It's as ugly as homemade soap but it certainly works!
Great ideas! I wonder, I've kept a sheath on my grandpa's Eastwing hatchet for years, and every so often I have to clean up the moisture/rust. I probably shouldn't store it in the leather? I've had it for years and really don't know better.
The best thing you can do is coat the leather sheath with oil several times and let it soak in. I prefer to use olive oil as it's food grade.
@@WayPointSurvival I've been using a "snow seal" from Red Wing. I'll try the oil instead.
that's cool can you putt grass or cotton inside it as a buffer for the blade. or would that make it worse?
It would hold moisture and make the blade rust. Oiled leather scrap would be better.
Axes should be kept sharp.i just use any piece of plastic,heat it up and shape it any way you want. Love your vids dude- never stop thinking.still wating for a Coleman cup water distiller/ de-salinator. If you dont- i will.thanks again
Thanks so much for watching! I would love to see your design for a desalinator!
Hmm, I might have to do that for my Gransfors Bruk axe i got for $20 and my Collins hatchet. No one sells leather around here. Hobby Lobby only has soft leather. There a couple of saddlers but they won't sell any leather.
I do have 2 old Plumbs, axe & hatchet. The one leather sheath needs replacing. Two old style wide blade shingling hatchets need handles & sheaths. Not sure if that chicken can is going to be big enough. Two other blades I picked up,a double bit & a metal detected bearded axe/hatchet blade with no cracks and not much rust. You got an improvised sheath idea for those? The shingling hatchets i thought would be great for bushcraft carving practice and for cutting kindling down to the thin pieces and maybe feather stick practice. The Collins is a bit thick and tricky for fire starter sizes. Gotta watch the fingers.
Oh, if you don't have a chunk of old garden hose, what would you use to cover the draw knife? One the one I have a couple pieces of hemp rope to hold the hose on. Need to change that up.
If you don't have any leather you can sometimes use old shoes or boots that you can buy at second hand stores really cheap and repurpose that leather it should be thick enough. Also, you can just wrap a draw knife with some old t-shirt and that should protect the blade just fine.
There seems to be some concern about moisture. My answer would be, once you got some semblance of a crease in the bottom of the can stop and punch two or three holes from the inside, clean the burrs then continue the flattening. As noted, the tin can is a temporary (or not) solution. You're just protecting the blade. Leather of course needs saddle soap or oil to waterproof. For small projects like that, you could put linseed oil, tung oil, or melted wax oil mix in an old cooking pan or foil pan and soak the leather, then give it a good rubbing and let it dry.
Yes, this is a temporary solution.
I'm gonna need more tins I have a lot of axe's
Lol. Thanks for watching!
🐺 I just gotta know why in tarnation do you carry a nail in you billfold ? I'm not going to ask where you carry your hammer cause I might regret asking lol . 🇺🇲🦅
Because it makes it quick and easy when I need to punch a hole in a tin can.
Or you could uae the back side of thw hatchet to smash it down?
Sure.
If your multi tool doesn’t have a file, you can use the rock that you hammer’d the nail through the can to smooth out the rough edges.
Indeed!
👍
Another good one ! I expect you could also peen a lot of the wrinkles out if ya had the urge .
I’ve got one of the little rubber covers that you are guaranteed to lose the first night out in the woods , works great at the house but I’m gonna be making one of yours soon , it’s more reliable and is harder to lose. 😜
Thanks James !
You're welcome. Yes, I'm sure that if you took your time you could make a much better looking project out of this.
😎
Thank you!
that multi tool is made by SOG?
Yes