@@BruckezBuildz injection and (or) 4-Stroke, but if we talking 200cc then your better off with just getting the tanslation (of power) to the wheel better and maybe a bigger carb + exhaust system (gind off intake and exhaust in the header off a bit, thats a thing you could do anytime) and get a carb-jet set to tune it propperly
Personally would have had the carb before the turbo plus with a single cylinder you got to have a "boost capacitor", you can find sizing diagram on the internet.
Imo a blow through carburetor all comes down to having proper boost reference to the float bowls, and fuel pressure has to overcome the boost pressure trying to close the float. And yes you are very right on the air capacitor. There is a simple formula, and at least 1 youtuber has successfully made boost and more hp with an engine smaller than 200cc. But they used efi.. and a shopping cart...
Turbo is bit on the big size for the engine, you will also need a plenum to stop you getting surging if you can make boost. Best mod for these engines is getting more revs, you will need billet con rod better valve springs and then cam and flywheel upgrade but can get around 16hp if you do the right things. More than that and you will need some serious stuff.
@@everettstormyto jste si teď vymyslel ne? Větší hloupost jsem už dlouho neslyšel. Tlaková nádrž u spádového karburátoru 😂. Co odvětrání a podtlak? Navíc karburátor prostě musí být před turbem. Tohle opravdu takhle postavený je spíše na škodu než k užitku, ale lidi co tomu nerozumí jsou nadšení jak je to great job 🤷♂️
@@vallenlen4301your comment is readable, you just forgot to put "a" in front of turbo and gearbox the added power from the turbo might be noticeable with that transmission, but it might not be taking advantage of it as much as it can I don't know what transmission is on it, it might have been replaced or modified already but I don't know for sure
I got a buddy and he put 2, 18 or 20 H.P. engines i forget whitch exactly, on a Johndeer frame with a ditch witch rear end and gearbox. He uses it in pulling competitions. He usually wins a little money with it to.
Nice, but you have to pressurise your carb on the atmosferic inlets thats have, otherwise it will be to lean, and more important you need a intake volume 3 times bigger than the volume of the engine to make boost for obvious reasons, need to compesate the 3 dead strokes cos you have one cilinder
@@litedude23_YTон знает о чем говорит, карбюратор работает на разряжении относительно атмосферного давления... Не веришь глянь на авиа двигатели с механическим нагнетателем и карбюратором. АШ-62ИР
Got to say, your mower build served as partial inspiration for mine.
Same here
I am 1000th like
You do realise that when you leave the waste gate open like that and just flopping around you wont get any boost
@@Roman-tz8lmkesinlikle
1. Hata 200 Cc kadar düşük hacimde yetersiz egzoz gazı
2.hata bu karbüratör ile turbo olmaz sadece boğulan bir motor olacak
not how it works but ok
@@AskTheEightif you can’t build pressure you won’t get pressure bud if it dumps it as soon as it’s made it’s doing nothing but making sound
is there any way to make this work ?
@@BruckezBuildz injection and (or) 4-Stroke, but if we talking 200cc then your better off with just getting the tanslation (of power) to the wheel better and maybe a bigger carb + exhaust system (gind off intake and exhaust in the header off a bit, thats a thing you could do anytime) and get a carb-jet set to tune it propperly
The baby snail is ADORABLE!! 🥰
Keep it up!
I bet the whole town shows up to watch you your grass. lol
To watch him his grass? Indeed. 😂
@@TheDennys21 youve never watched him his grass before? its very interesting
I've gone to watch him his grass 4 times now. He his grass every time.
I think I might need to watch him his grass it sounds interesting
@@Floofie_boi tis very good its about 7 hours long well worth ist
Personally would have had the carb before the turbo plus with a single cylinder you got to have a "boost capacitor", you can find sizing diagram on the internet.
Зная этот карбюратор могу предположить, что бензин выдовит в атмосферу.
What happens when it hits 88 mph with a boost capacitor??? 😂😂😂
Imo a blow through carburetor all comes down to having proper boost reference to the float bowls, and fuel pressure has to overcome the boost pressure trying to close the float. And yes you are very right on the air capacitor. There is a simple formula, and at least 1 youtuber has successfully made boost and more hp with an engine smaller than 200cc. But they used efi.. and a shopping cart...
@@brandonfeeley514don't knock it till you try it. 😀
"I don't think so Tim", lol
This 200cc sounds like some massive V8 man :D
Bro what?
ah yes the v8 sounding 1 cylinder lol
DAMN YOU ! You have infected me. Now I am walking around making cartoon sounds to my self all day. Hope nobody hears it.😂
Just started? I've been treating that as default mode for years
Wish there are kits to buy and do this. . .. . Totally makes me think of Tim Allen. . .😂😂
It so does!
*Tim Allen grunts
More power
Love the stance of your JD! Cool build!!
JDM
john deer mower
japaneese domestic market
HMMMMMMMMMMMM
Buddy got er purring like a leopard
Impractical upgrade for the cost but I am subscribing anyway ❤
Turbo is bit on the big size for the engine, you will also need a plenum to stop you getting surging if you can make boost.
Best mod for these engines is getting more revs, you will need billet con rod better valve springs and then cam and flywheel upgrade but can get around 16hp if you do the right things. More than that and you will need some serious stuff.
"too big of a turbo..."
*Also the world's cutest little turbo*
But yeah this guy's 100% correct
Карбюратор надо ставить до наддува, а не после. Карбюратор работает только с отрицательным давлением.
That why hes got a pressurized fuel tank.
Та не Русские😂
@@everettstormyto jste si teď vymyslel ne? Větší hloupost jsem už dlouho neslyšel. Tlaková nádrž u spádového karburátoru 😂. Co odvětrání a podtlak? Navíc karburátor prostě musí být před turbem. Tohle opravdu takhle postavený je spíše na škodu než k užitku, ale lidi co tomu nerozumí jsou nadšení jak je to great job 🤷♂️
@@ondrab9281 I can't translate
@@everettstormyHe is saying you are stupid. Which, I agree lmao. He is Making no boost lmao
Tolle Arbeit ich liebe es ❤❤💪💪
Same. Lol.
@@BlokProductions lol isso
Was ist daran toll.
Das ganze funktioniert technisch schon nicht.
Now I need to hear some runs with it
You wont.because.this is fake. It isnt set up properly, there wont be any actual boost. He had done all this for looks
this is the best short ive seen
Bro really hit the 🤌
Bro I've never heard of you but when I heard that giggling in the video I knew this was gonna be good
Instant sub
The john deere we actually need 😂😂
Ahh I like it! Watching this just gave me an idea for one of my projects. Thanks!
Now it will sit, never ridden:(
I would use it as a daily driver
Love your videos
The way bro said 🤌🤌🤌
Insert Austin powers “yeah baby”
И толку ноль будет, надо ставить инжектор, чтобы хоть как-то это всё работало 😮
Carburetors work with turbos if you do it right.
@@keksiman7203карбюратор работает только от разряжения в нëм. Турбина наоборот туда нагнетает давление и топливо не всасывается через жиклëр.
Seems he did something with the oil catcher can and a pressure valve
Ну в карб давить турбиной так себе затея
Turbo💀"hey theres a lawn mower going 100mph on the hwy, i need back up"😂😂
We need to start the vids just like that so when you swip down it goes with the next one
Dude the noises this guy makes!!!
That’s clean lookin
Why does that lawnmower have a headlight?
The headlight in question:
Bro can mow his lawn in 5.6 seconds flat
The engine in your lawn mower is better than my car.
It needs a bigger turbo. 60 psi should do the trick🔥
Awesome ingenuity
Got Tim the tool man Taylor over here, and it it fantastic!
Did you convert the carb to a blow through setup, what fuel pressure regulator did you use?
A Supercharged 670 predator vtwin would be sick
Would like to see it in action! Looks awesome!
Now all you'll need is about 5 air filters per mow, and you're all good.
Where the gearbox from ???
It uses hydraulic like the backhoe
Really Nice Idle i like it so much when it runs like that.. Good Work with the Turbo and Carburator Hope to Chat with you Best Regards J.
That's cold ASF..
I built a mower that eventually got posted by 1320 after some kids threw a gaming chair on it😂 keep up the builds bro
Hey Cleeter!
Flip those old trusses upside down and use them to build your bridge across the ditch.
That grass is 'bout to have a bad day.
In the words of Tim the Toolman Taylor, "let's supe that sucker up"
Make a sound stututu💨
Guys see this and say "hell yea"
You don't have to have a operable waste gate.......but it helps .
Ohhh man. I wanted to hear it Runnn
Even if you put turbo on you still can't feel the power unless you put gearbox on it
Please translate this nonsense statement, get an editor.
@@thomasmleahy6218 Z世代は注目を集めたいだけのなんて情けない奴だとコメントしている。 私の英語の文法がそれほど良くなかったのはわかっています。
@@vallenlen4301your comment is readable, you just forgot to put "a" in front of turbo and gearbox
the added power from the turbo might be noticeable with that transmission, but it might not be taking advantage of it as much as it can
I don't know what transmission is on it, it might have been replaced or modified already but I don't know for sure
It sounded like the choke was still on
Bro is a minion
If it gets the grass done faster, miles well
This is why the world needs men. I've never seen a woman turbo charge a lawn mower.
Okay, that's pretty cool...
Such a cool build
Subbed
Damn ill ride it to my office everyday
I got a buddy and he put 2, 18 or 20 H.P. engines i forget whitch exactly, on a Johndeer frame with a ditch witch rear end and gearbox. He uses it in pulling competitions. He usually wins a little money with it to.
Nice, but you have to pressurise your carb on the atmosferic inlets thats have, otherwise it will be to lean, and more important you need a intake volume 3 times bigger than the volume of the engine to make boost for obvious reasons, need to compesate the 3 dead strokes cos you have one cilinder
This is so badass! Bro teach me to build a small engine like this!! UOO build me a Go-Kart please!!! 😁
No lie end results sound like Harley-Davidson
bro, it looks like a video when you use it for walking
Bros been watching caiden avenis with the blue mustang on TikTok
That is awesome!!!!!!
this is like if How To basic Was a mechanic
What kind of oil pump are you running where’d you get it from?
I was interested too did some research and he is using a electric in line fuel pump for a kubota zero turn. Lmk if you want the part number.
@@calebwitherbee5499 yes
Чё ё б нулись дуть в карб?🤣🤣надо чтоб турбина всасывала из него😉
????
Всегда поражался таким тюнерам, еще пяткой в грудь будет стучать типа разница пиздецкая валит лучше )
You don't know what ur talking about
@@litedude23_YTон знает о чем говорит, карбюратор работает на разряжении относительно атмосферного давления... Не веришь глянь на авиа двигатели с механическим нагнетателем и карбюратором. АШ-62ИР
Смотря какой карб. В обычный дунешь и топляк в обратку мимо поплавковой свалит 😅
OK, seriously. what is this dude‘s beef with making a good practical exhaust😂😂
Turbo the twin engine
Is turbo I love it
Yo whens the next lawn mowing race
IMAGINE IT HAS A V12 ENGINE SWAP
Nothing runs like a Deere.
I call it the demoncant 🎉🎉🎉
Imagine getting turbo lag on a lawnmower
Swap around the gear on the chain so that it would go faster
You should take the pit wheelers to a off-road park
i want to see him attach a fucking v8 engine to that lawn mower
You should put speakers🔊
Where's the exhaust?
Stylé
You showed us everything but the top speed !
Nice work
do a dyno test
That this beautiful
Mowing vs doughnuts 🍩
Now it need 2 😈
Take it to a car meet 🤣
I like this guy
Never did get the grass cut, did you?
DRIFT TIME😂
El turbo solo introduce aire a la admision , si no hay un sistema que corrija la mezcla y el avance de ignicion el motor terminara rompiendose.
Поршневая 😢
Hope I put performance gasket seals on
This is cool, but it'd be a lot cooler if it was still a functional lawnmower
Надо ставить турбину после карбюратора чтобы смесь была нормальная