UTV Snow Plow BUILD - Part 1
Vložit
- čas přidán 17. 12. 2021
- Fabricating electrically controlled snowplow from scratch for my homemade 4x4 utility terrain vehicle/UTV/ATV (build link below). I'm using pieces of scrap steel I purchased from a local steel shop thus the blade being rolled from six individual pieces that (conveniently) fit into my homemade sheet metal roller. The strengthening strips are cut on the homemade CNC plasma table (link below). To control the blade side-to-side movement I'm installing a 12v ATV/UTV winch. Build continued in the next video.
Stay tuned for future videos! Thanks for watching!
My other videos: czcams.com/users/DonnDIYvideos
Support me on: www.patreon.com/DonnDIY
Follow me on: DonnDIY
Homemade CNC plasma build: • CNC Plasma Build
Homemade 4x4 UTV build: • 4x4 Off-Road UTV Build
#donndiy #homemade #snowplow
Welding equipment borrowed from Spetselektroodi AS, Estonia:
Fronius TransSteel 2700 welder
Optrel Crystal 2.0 Welding Helmet
Hypertherm Powermax 45 XP plasma cutter
More fabrication videos on
I never really appreciated your videos until I started to notice how many other channels I like to watch have turned into just talking. You don't do that, you just get right down to building whatever it is you're building and you don't say a word. I like that and I hope you don't change your format because there are people like me (I think) who appreciate that. Good stuff!
Your design, craftsmanship, and usage of materials really make your videos a joy to watch. Amazing work!
I've been subscribed to you for 3 years, I haven't missed a single video, and it's always interesting.👍
I love how you build these things using a fine marker, a couple drills and an 4.5" angle grinder. It makes me think maybe I can do some of this stuff, too! Thank you!
класс
На самом интересном месте 🤨 . Как всегда, крутяк. За монтаж, отдельные👏👏👏
Hi Donn,
Cable clamps the saddle always goes on the live line. An old crane rigger told me “never saddle a dead horse “ I’ve watched a lot of your videos your a clever designer and fabricator
I wish I had tilt springs on my plow, but it would be hard to reengineer. It looks like you have a good design for your plow.
Looks like Mitutoyo hooked the brother up. Fantastic equipment, for fantastic builds!!!
Fabricating like a boss in Vans 👌👌
Excellent work
Really loving having your videos back on youtube. Your fabrication is brilliant, always well thought out. Alot of work goes into these projects and all the video making. Its brilliant, thank you.
Awesome build and ingenuity! If I may offer a few learning opportunities though. Your cable clamps are installed upside down, remember "never saddle a dead horse" and you'll never get it wrong again. MIG welds should always be pushed, not pulled.
Amazing skills! All the things I have learnt in my apprenticeship are seen gelling together. And then no clutter, no talk is pleasing. A great experience.
You should add some grease points on this little tubes you welded on. Because there will be rust after the winder and it wont flip next year.
Väga viisakas tegemine!!!
Awesome work Donn.and great structural engineering for extra support on the blade.
I would Buy everything you make !!! Well thought out projects every time you build something !!! I love watching you work .....