I don’t understand your language but from what i have understood there was an issue with the right ribbon the left one was correct(left and right as it is seen on video) so why did you put tape on left side if left was good? Need a quick answer before trying to repair mine please
Hi gud pm kailangan mo na mag cutting method sa top board Ng LCD screen.. hanapin mo Ang LC1 llc2. Kung Ganon parin isama mo na Ang HC1 Hanggang lumabas Ang picture.
New subcriber po, same issue po sa skyworth 55 inch namen kaso po sunog po yung ribbon yung part ng gitna po kaya possible poba nayun ang problema kaya po wala display and magkano po kaya pagawa?
Hi check mo Muna Ang switch at PALITAN mo Muna mga filter capacitors sa secondary side. PAG Ganon pa Rin reheat mo mga smd ic MALIBAN sa system ic. Gumamit ka Ng hot air at flux.
Tnx front sharing
Tnx sharing lodi
Àlommax èlectronics shop where is it located please show me
boss thank u nka repair n ako succes kaso mdjo my mgblink konti po d halata tpakpan ko 10pin sa ribbon
Location nio po sir mag papagawa po, may sounds din po pero blank screen
I don’t understand your language but from what i have understood there was an issue with the right ribbon the left one was correct(left and right as it is seen on video) so why did you put tape on left side if left was good? Need a quick answer before trying to repair mine please
right is good according to the uploader.
That's right, the fault is on the right side when the TV is in front
Sir yung sakin complete voltage sa tcon may Vgh vgl vcom pero wala display
Saan po Ang location nyo
Meron ba kaung wire ng 55UB5500 digital audio para maiconnect sa component at magkaron aq ng BLUETOOTH..
Sory Wala po
San po kau located sir?
Yong sa amin nman sir may light ang tv
Maglabas yong skyworth pero walang channel.para bang na log.
Hi panel issue pa Rin Po yan
location po Ginoo
san po location nio? tnx
d2 sa akin ngaun sir gnyan dn walang picture pero ginawa na lhat nang gnun pero ayw tlaga mg blue ung picture
Hi gud pm kailangan mo na mag cutting method sa top board Ng LCD screen.. hanapin mo Ang LC1 llc2. Kung Ganon parin isama mo na Ang HC1 Hanggang lumabas Ang picture.
Pwede po bang mag block sa left and right ng panel? tingin ko kase same may prob ii
Boss good day, PAG dalawa Ang sira, don kana sa topboard mag cutting. Hanapin mo Ang LC1 TO HC8
New subcriber po, same issue po sa skyworth 55 inch namen kaso po sunog po yung ribbon yung part ng gitna po kaya possible poba nayun ang problema kaya po wala display and magkano po kaya pagawa?
PALITAN mo lang ribbon wire
Sir tanong lng poh pano poh kpag tinaggal ko ung left or right nd xa nag black and white salamat poh
Hi sir sa bandang topboard kana tumiram hanapin mo mga LC1 LC2 HC1 TO 8. HANG MO mga resistor. PAG Ganon pa Rin, sa kabila ka naman
Sir kapag hndi SYA mag on.. red led lights Lang SYA.. hndi nalabas Yung green led lights pag pinipindot Yung on, walang picture and backlights
Hi check mo Muna Ang switch at PALITAN mo Muna mga filter capacitors sa secondary side. PAG Ganon pa Rin reheat mo mga smd ic MALIBAN sa system ic. Gumamit ka Ng hot air at flux.
san location mo po? tyvm
Paano kung dalawa Ang may problem sa panel sir?
PAG kabilaan na Ang sira sir kailangan Muna mag palit Ng LCD panel.
pwede po ba mag block for both sides?
Hindi pwed po.
Ano pinalitan mo di mo nmn nilinaw
Gudpm sir, ang akin po walang red light ang switch, hindi ma switch on
Hello sir need to check all voltages if present sa secondary power supply aka
Sir usually magkano po paayos ng sa panel fuse capacitor
Hi samin sa Bacolod NASA 1k
Ang gulo ng sinabi mo. Nung una sabi mo good ang left side pero sa left side ka nag blocking. 😂