21’ HUSKY FE501 HARD ENDURO BUILD SECOND TO NONE

Sdílet
Vložit
  • čas přidán 27. 07. 2021
  • Extreme back country single track riding ✅
    Open trail mile slayer ✅
    Pavement connector master ✅
    Over-lander on knobbies ✅
    Haul a chainsaw like a lumberjack ✅
    The ultimate Swiss Army knife motorcycle ✅
    Forget about ‘dual sport’
    This thing is an ‘all sport’
    Redefining what a motorcycle is.
    There’s absolutely nothing quite like a Taco Moto Tuned and set up KTM hard enduro / dual sport / all sport ultimate dirt bike.
    Components and parts used on this bike:
    TMC FUEL TANK TAP
    TMC EMISSION CLEAN UP SYSTEM
    TMC WHEEL WEIGHTS
    TMC IN TANK FUEL FILTER MOD
    TMC THIN OIL FILLER CAP
    GET ECU ENGINE MANAGEMENT SYSTEM WITH TRACTION CONTROL AND MAP SWITCH, CUSTOM TACO MOTO CO / HP RACING MAPS
    GRAVES MOTORSPORTS FULL TITANIUM CARBON END CAP MUFFLER
    MOLECULE UHMW FULL COVERAGE SKID PLATE
    REFLEX RACING FULL FLEX HAND GUARDS
    PRO TAPER EVO BARS
    ODI ROUGE GRIPS
    SYSTEM TECH RACING CARBON FIBER SHARK FRONT
    SYSTEM TECH RACING G10 SHARK FIN REAR
    ACERBIS 3.9 CLEAR FUEL TANK
    EMPEROR RACING MOTHER OF ALL RADIATOR GUARDS
    MOTO MINDED XLPRO HEAD LIGHT SYSTEM
    PRO MOTO BILLET EVO AIR EXT PEGS
    EARTH-X LITHIUM IRON BATTERY
    TOKYO OFF ROAD STARTING CAPACITOR
    GPR PRO STABILIZER KIT WITH UPPER TRIPLE CLAMP AND ISOLATORS
    ENDURO ENGINEERING LEVER GRIPZ
    TUSK REAR BEARING COVER CAPS
    BULLET PROOF DESIGNS ADJUSTABLE REAR AXLE BLOCK
    REKLUSE DAMPER KIT
    REKLUSE CX CLUTCH SYSTEM
    SICASS START / KILL SWITCH
    DOUBLE TAKE MICRO BUG-EYE MIRROR
    DIRT TRICKS PRIMARY GEAR DOME WASHER
    DIRT TRICKS 48 TOOTH UNICORN TEARS ANODIZED REAR SPROCKET
    WARP9 TITANIUM SPROCKET BOLTS
    RISK RACING FORK DOCTOR
    GOLAN QUICK DISCONNECT FUEL FILTER
    TACO MOTO SIDEWINDER FUEL HOSE
    CPC FUEL QUICK DISCONNECT COUPLING
    PC RACING FUEL FILTER GASKET
    PC RACING FILTER SKIN
    AIR BOX COVER MOD
    KTM HARD PARTS SCREENLESS AIR FILTER CAGE
    TWIN AIR FLAME PROOF FULL FLOW AIR FILTER
    CANYON DANCER FORT TIE DOWN LOOPS
    TUGGER FRONT AND REAR ENDURO GRAB STRAPS
    FULL FLOW TANK VENT HOSE WITH CHECK VALVE
    STR FORK BLEEDERS
    AZ RIDE SHOP FOLDING FOOT BRAKE PEDAL
    SEAT CONCEPTS COMFORT STANDARD HEIGHT SEAT
    SKF SEAL WIPERS
    RACETECH GOLD VALVE XPLOR 48 OPEN CHAMBER CONVERSION AND 'MAGIC CARPET RIDE' CUSTOM VALVING
    RACETECH GOLD VALVE REAR, CUSTOM VALVING
    RACETECH BLADDER SHOCK CONVERSION KIT
    SKF FORK SEAL PRE WIPERS
    SPECTRO FORK AND SHOCK FLUIDS
    MOTUL 7100 ENGINE OIL
    AKT MAGNATRON OIL FITLER
    DUNLOP TIRES
    MICHELIN BIB MOUSSE INSERTS
    Taco Moto Co steekers (good for 3-4 HP guaranteed)
    MOST ALL OF THE PRODUCTS AND COMPONENTS IN THIS VIDEO ARE FOR CLOSED COURSE COMPETITION ONLY. USE OF ANY OF THESE PRODUCTS, MODIFICATIONS OR COMPONENTS ON PUBLIC ROADS MAY BE BREAKING LOCAL OR FEDERAL LAW.
    TACO MOTO CO. ENCOURAGES YOU TO RIDE A LEGAL BIKE SAFELY AND ALWAYS STOP FOR TACOS.
    If you need any parts, want us to build you a bike, have any questions or need help with anything on your machine don't hesitate to call or email us.
    702-812-6626
    mike@tacomoto.co
    tacomoto.co/
    also join us on the best ktm / husq tech support group on facebook:
    groups/EXCFE...
  • Sport

Komentáře • 68

  • @kimojon9665
    @kimojon9665 Před 3 lety +14

    Everything I've ordered and all the business I've done with Taco Moto has been TOP NOTCH!!! Love these guys and they are true dirt bikers that care about each customer. I wonder how much that bike weighs now with all the upgraded components vs. stock. Thanks for the great vid. Will be ordering some of those foot pegs from you soon.

  • @charliemccallum5660
    @charliemccallum5660 Před 3 lety +3

    Love these big bike builds especially the R’Idaho/TOI builds 👍🏻

  • @domr358
    @domr358 Před 3 lety +4

    Mike, thanks for another awesome "ultimate bike build"! More details on the suspension and that oil filter would be outstanding! I am most of the way through setting up a KTM version of the same bike and am very curious about those two aspects!

  • @distilledfreedom1840
    @distilledfreedom1840 Před rokem

    I truly love my 501, even w/out these upgrades. Hard to beat.

  • @MarkSpencerAZ
    @MarkSpencerAZ Před rokem

    Very sweet Mike! I'm not going to let my wife watch this video. She'll want everything you described on your new fe350

  • @TheCaptainbarnacles
    @TheCaptainbarnacles Před 2 lety +2

    I'd love to see the radiator guard comparison. Thanks for loving bikes so much!

  • @onejo44
    @onejo44 Před 2 lety

    awesome detail!!!

  • @roncorey7289
    @roncorey7289 Před 2 lety +1

    You build amazing bikes

  • @PropDusting
    @PropDusting Před 2 lety

    So many goodies!!! Nice bike!!!

  • @campfather
    @campfather Před 2 lety +1

    I just picked up a 22 FE501s and I am fully overwhelmed by this video. So much good info tho.

  • @Thumpermad
    @Thumpermad Před 2 lety

    Mate I love your reviews on the bikes you have kitted here on the East Coast of Australia it would cost you a body part to buy half that stuff I really like the Clake setup and the pipe it actually looks similar to the Wings muffler very similar and they're great with different optoins for super quiet and spark arresting thanks heaps for the totally in depth reviews fricken awesome builds

  • @scottfast03
    @scottfast03 Před rokem

    Sick bike

  • @jackbaldwin6177
    @jackbaldwin6177 Před 3 lety

    Good Stuff Mike

  • @ivanwilliams7679
    @ivanwilliams7679 Před 3 lety +1

    Hard enduro dual sport. I like that it's what I ride only a ktm 350 excf done just like that

  • @DezertSlayer
    @DezertSlayer Před 2 lety

    let's build some 501's Mike! love this build!

  • @motocannon1838
    @motocannon1838 Před 2 lety

    Basically what I've based my build on some. Not sure yet on power mods. Mostly doing protection first. Then lights and seat, mako 360 bar mounts. Graphics. I'm interested in the traction control. But I haven't seen a good video on it yet.

  • @JohnTYoung
    @JohnTYoung Před 3 lety +5

    My friend had a mid-70's Husky 250 with a chrome tank that we thought was all the rage. Every time I think of a Husky that's the vision I see. This one, is of course, way nicer.

  • @cmedina61
    @cmedina61 Před 11 měsíci

    I basically copied this layout on my FE501. Except my local Susp shop dialed my bike in for me. And fmf for exhaust and vortex ecu. All the taco moto fuel connections were a must.

  • @feellucky2970
    @feellucky2970 Před 3 lety

    Very nice build. It appears the fuel line is rubbing against the cylinder. But that's just me I'm picky that way.👍🏻

  • @eascencio847
    @eascencio847 Před 2 lety

    Great video who makes that throttle cable guide on the handlebar clamp?

  • @fcalin21
    @fcalin21 Před 2 lety

    Please do a build of the beta 480 rr.

  • @brianahrens4637
    @brianahrens4637 Před rokem

    I love all the upgrades and mods. Having said that I've put 3700 solo miles on a 2023 fe501s with zero mechanical issues. I don't do extreme hard Enduro but I've been through some nasty rocky crap. Never had a flat either. I carry tools but haven't needed them. What are essential upgrades to make sure I don't break on the trail? Thanks

  • @bryand2978
    @bryand2978 Před rokem +1

    If this guy ever wants to sell this bike let me know. He literally put everything on that I would have done.

  • @michealburnett7877
    @michealburnett7877 Před 2 lety

    Speaking of radiators and colorant, why don't you use the CV4 radiator caps with the higher pressure?

  • @sundancejd
    @sundancejd Před 9 měsíci

    Wow

  • @SR-yc4ho
    @SR-yc4ho Před 3 lety +3

    Dang Man is that my 22 KTM-500 in the background, that you wouldnt give up from renegade sports about a month ago! 😅😂!! I picked another one up about 3 weeks ago! I Love it! So light and smooth power! I just preodered your tailtidy/enduro plate last night! probably get in touch to have you do the get ECU and get the graves exhaust and bar stabilizer this winter! Ive been tearing up the mountains here i north utah every weekend! Great videos and content!

    • @TACOMOTOCO
      @TACOMOTOCO  Před 3 lety +4

      amigo! that 22 behind the 501? that's our new 350. we had a few 500's on order, did you want to snag one? i'm sorry if we ate your milkshake amgio (movie reference). sounds like nando hooked you up though i guess. make some videos of your braaaap and share links. stay rad and never die.

    • @SR-yc4ho
      @SR-yc4ho Před 3 lety +1

      Haha yea nando was going to give me a 500 they had in the back for you and give you the next one that came in! but i guess you already had it for someone specific! So it didnt pan out ! But i ended up finding one in provo so i snatched it up! No harm no foul! Ill definitely be giving you some business soon! And looking foward to that tidy tail!

  • @gregbradnam8072
    @gregbradnam8072 Před rokem

    Hi Mike, just purchased 2023 501s and ordered the Emperor guard, will a larger tank affect install, I see the larger tank on this 501.

  • @mooang17
    @mooang17 Před 3 lety +1

    That has to be the 3.9 tank?? With the big bulky top?

  • @VagTechKarl
    @VagTechKarl Před 2 lety

    Do you guys have a sort by motorcycle option on your site? If so I must be missing it.

  • @Singletraxrdr
    @Singletraxrdr Před rokem

    Reeds out on this one or did you leave them in?

  • @erombalski
    @erombalski Před 3 lety +1

    Will your drop in wiring harness include circuits for converting to LED throughout? If not, will it have the wiring and connectors included to add on an LED controller? (2021 KTM 500 EXC-F)

    • @TACOMOTOCO
      @TACOMOTOCO  Před 3 lety +2

      yes, but if you have an EXCF you don't need the harness just the lights, like our LED fork wraps 360's and the tidy tail.

  • @fasstimes9122
    @fasstimes9122 Před 2 lety

    What a beautiful build. What is a stronger bike Ktm 500 or Husq 501?

    • @twostroker56
      @twostroker56 Před 2 lety

      Their effectively identical other than linkage for the 501 and the use of magura hydraulics instead of brembo. The husky uses a composite subframe instead of aluminum.

  • @mdayne1142
    @mdayne1142 Před rokem

    Hello could you send me links to the products you went over in this video? I would like to purchase some of these.

  • @theone31man
    @theone31man Před rokem

    Where did you get those footpegs?

  • @tomskinner6640
    @tomskinner6640 Před rokem

    Dam and I’d be happy with a old cb500 or kx500 for my 7 acres lmao

  • @raphihuberclimbing8730
    @raphihuberclimbing8730 Před 5 měsíci

    Do y'all ever ride or do you just build? :D

  • @johnholbrook6042
    @johnholbrook6042 Před 3 lety

    Read that frame has a compoote section that is easuly broken

  • @marjanmayer
    @marjanmayer Před 2 lety

    whats going on with the magura bicycle brake on the left side of the bar

    • @TACOMOTOCO
      @TACOMOTOCO  Před 2 lety

      Left hand rear brake system by OX BARAKE

  • @02Clint
    @02Clint Před 3 lety +2

    What’s the approximate cost for all those upgrades, say I just drop off a new bike and say I want all these upgrades, amazing work my friend

    • @chadcromell4767
      @chadcromell4767 Před 3 lety

      I’d guestimate 4-5k

    • @chadcromell4767
      @chadcromell4767 Před 3 lety +2

      Spoke to soon 5-6k probably closer to 6.

    • @kanon0853
      @kanon0853 Před 2 lety +2

      @@chadcromell4767 Truthfully I was expecting more. Put a rally tower on it and you’re looking at a $20k dirt bike. 😬

    • @ryananderson6321
      @ryananderson6321 Před 2 lety +1

      @@chadcromell4767 I would guess at least 10k. the suspension alone has to be like 3k. The parts list is extensive! worth it though if you got it $$

    • @cmedina61
      @cmedina61 Před 2 lety +1

      I have a lot of these upgrades on my 2020 Fe501. Vortex ecu - FMF CARBON Scott’s steering stabilizer- bro mounts and fast company brass inserts , mousse bibs aceribis 3 gal, shinko fatty/ max is desert It, a new decal kit from Bike graphics. We’re at 18k including the bike. Worth every penny on the long overnight rides when we put in 100miles OFF-ROAD MILES in. Just my 2 cents.

  • @chadcromell4767
    @chadcromell4767 Před 3 lety

    Do you happen to know the weight of the 500 with all the add ons?

  • @johnfryman4428
    @johnfryman4428 Před 2 lety

    Works Connection aluminum skid plate mo Better

  • @wipperwil
    @wipperwil Před 2 lety

    What would you charge for all this work?

    • @TACOMOTOCO
      @TACOMOTOCO  Před 2 lety

      We do builds in the $3500-18k range

  • @eriknash8783
    @eriknash8783 Před rokem

    Pretty sure that is the 3.9 Gallon Fuel tank, not 3.1

  • @jesse1441
    @jesse1441 Před 2 lety

    It’s not a Baja designs light?

    • @Cycle9568
      @Cycle9568 Před 2 lety

      Motominded makes the mount that is being used.

  • @JohannesDalen
    @JohannesDalen Před 2 lety +2

    My wallet cries in DRZ.
    Joke, I have absolutely nothing to do on a bike this capable!

  • @drewjonespdx
    @drewjonespdx Před 3 lety +2

    there's no way that's only a 3 gallon tank

    • @TACOMOTOCO
      @TACOMOTOCO  Před 3 lety +2

      3.9

    • @drewjonespdx
      @drewjonespdx Před 3 lety +1

      @@TACOMOTOCO damn! getting my 3.9 acerbis tank installed on my 21 500 today. it looks like it goes so far up on the tank!

  • @chuckm1320
    @chuckm1320 Před 2 lety

    You should have better frame guards. You guys haven’t seen the acerbis guards? They cover more of the frame….. cmon, use the best……

  • @tomskinner6640
    @tomskinner6640 Před rokem

    If you ask price you can’t afford it

  • @miro_s
    @miro_s Před rokem +1

    Super build, but that tank is positively ugly…

  • @mgpro2389
    @mgpro2389 Před 2 lety

    Nice bikes but don't call it hard enduro😂

  • @teach1644
    @teach1644 Před rokem

    Interesting that you take a stock bike and layer expensive junk… you can do well with stock…. Don’t need any of this!