How to Make A Simple And Easy Arduino Robot For Science Project
Vložit
- čas přidán 14. 11. 2019
- Hello guys, In this tutorial I am going to show you how to make a very simple and easy Arduino Robot for your science project. So let's get started :)
Please subscribe ❤️ and turn on notifications! 🔔 bit.ly/2WlyA8Y
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
-------------------------------------------------------------------
Parts Required
(Baggood.in)
1) Arduino Uno - bit.ly/2Fz8M4q
2) Arduino Motor Driver Shield - bit.ly/2VWaYsn
3) TT Gear Motor (2x) - bit.ly/2Rtg2G9
4) Rubber Wheels(2x) - bit.ly/32I5fZG
5) Servo Motor - bit.ly/2Soq7E4
6) Ultrasonic Sensor - bit.ly/2RzebL7
7) 18650 Li-ion Battery - (From PowerBank )
8) Battery Holder - bit.ly/2sulLwu
9) Male and Female Jumper - bit.ly/2su6mfM
10) DC Power Switch - bit.ly/2FtyEzs
11) Acrylic Sheet - (Local Store)
(Amazon.in)
1) Arduino Uno - amzn.to/35flEXS
2) Motor Driver Shield - amzn.to/30Z9ijj
3) TT Gear Motor and wheels set - amzn.to/31WSD0Z
4) Servo Motor - amzn.to/2IAigNH
5) Ultrasonic Sensor - amzn.to/33fwrQa
6) 18650 Li-on Battery (2x) - bit.ly/2CZabQ7
7) 18650 Battery Holder - amzn.to/33iY4b3
8) Male and Female Jumper wire - amzn.to/2MmRjOE
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - bit.ly/2FtyEzs
[Flyrobo.in]
Arduino Uno: bit.ly/2m8HZnL
Motor Driver Shield: bit.ly/2mvO7XL
Wheels: bit.ly/2kxPeFF
TT Gear Motor: bit.ly/2m4fMid
servo motor: bit.ly/2MIdoaB
Ultrasonic Sensor: bit.ly/2McGLm1
Male and Female Jumper wire: bit.ly/2mu0aVo
--------------------------------------
Circuit Diagram - bit.ly/3fWsKFH
Code - bit.ly/3jCOWXE
--------------------------------------
More Arduino Related Project :
1) Arduino Human Following Robot - • How To Make Arduino Hu...
2) Arduino All-in-one Robot - • Arduino All-in-One Robot
3) Arduino Metal Detector Robot - • How To Make DIY Arduin...
4) Arduino Obstacle Avoidance Robot - • How To Make A DIY Ardu...
5) Arduino Voice Control Robot - • How To Make DIY Arduin...
6) Arduino Gesture Control Robot - • How To Make DIY Arduin...
--------------------------------------------------------------------------------------------
Contact me
Facebook: / surajit.majumder.165
Instructables: www.instructables.com/member/...
twitter: / diybuilder1
Instagram: / diy.builder
------------------------------------------------------------
🎧 Background Music
Track: Jazzy - LiQWYD [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Jazzy - LiQWYD | Free ...
Free Download / Stream: alplus.io/jazzy
Track: Perspective - IVAAVI [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Perspective - IVAAVI |...
Free Download / Stream: alplus.io/Perspective
-------------------------------------------------------------
#ArduinoProject #ArduinoRobot #ArduinoCar - Jak na to + styl
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
You are ranking number 1 for the search term: building arduino robot. Well done!
if i had my own space, i'd make stuff like this. i can totally see this being adaptable for a remote control platform, with a camera mount.
I love it! I could probably code this. To those who cannot I recommend O'Reilly Head First Java to start. This is a book for all ages. You can read about 100 pages in and understand enough Object Orientated stuff to go through the libraries. Also, there are free ebooks on wikipedia in the computers category on languages like C(which would help in arduino C), C#, and even Robotics. and of course arduino offers a starter kit with a book that goes through the basics of electrical workings to I think about 10 projects. I hope this helps anyone out there I do understand a lot of young kids watch these kinds of videos as I did too.
Ok
Thank you
Don't you have a book for c++
I uploaded the code and also fixed everything according to the diagram still my robot is not working
Can you help me with that
I'm still lost just like this robot
XD
@City Bass didn't know lost meant poor
@City Bass Yes but he's saying he didn't know that not that he doesn't know that
Masha Allah fat
Yaaaaa
Congratulations on 100k sub!
AMAZING PROJECT KEEP IT UP...ITS VERY GOOD FOR SCIENCE FAIRS AND INNOVATIONS CLUB....REALLY I APPRECIATE THIS KIND OF INNOVATIVE IDEA ....PLZ MAKE SUCH ROBO CARS THANK YOU....
Please tell me...... how to attach the switch?
Can we interact with this robot
@@Mikehydra just Attach it in the positive wire. Of the Battery holder
How
Hey man! It's a wonderful video:-)
All videos are excellent . I really enjoy to watch till end
Nice preoject bro. The background done with LEDs are super dope.
Can I run this robot with the simple 9 volt battery
@@ashishgupta-hs4qw you can
You have been selected in most underated channels
What do u mean by that
@@tanishasanghvi3005 underated means something really good which often doesn't get recognized
Ooooo
WOW! you really are the DIY Builder 🏆🏆🏆🏆🏆🏆🏆🏆
Excellent project 👍
Thanks sir. I will make this in my science Exhibition.
Love it❤️
thanks for the list of materials and their links and this video, there is one 11-12 days for my science exhibition project in school.
I can also use it as a moon/mars rover
Did you make it? I haven’t seen anyone make it!
BEAUTIFUL !!!!!!!! Gracias !!!!!!!!
I did that robot and I have some recommendations for you.
First the robot is unestable so is difficult to move.
Second you need have that wheels because if you use another ones it gonna fall
Finally you need that acrylic piece
why we need that acrylic piece
Can you please send the code that you used the one I have isn't working
Thank you for this tutorial. I've built it and it works wonderfully!
Great to hear!
Can u share me the. Code
Plz tell me how to install the switch in robot plz
How to add lib
@@DIYBuilder The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
helped me for my school project
thanks for this video we are working from this at our class
Szily Kálmán, Hungary
still hoping you make wall-e !!!
True
I will make , just need some time.
@@Mippi12 good luck 👍
Nice 👍
I,am from Azerbaijan
I love your channel
Thanks
@@DIYBuilder what is the on / off key on the pi bed, please write
Yes , I made it tooo , thank u mr
make wall-e using the gear wheels you used a while back and use the ultrasonic sensor like this one
i recieved 1st rank in inter school competition
U r awesome
how
That’s very dope. I have noticed you glued the DC power switch to the battery holder, and I can see some wires.. could you please show the wiring for that part, I think you skipped that step in the video. :)
hey you just because of that you cant tel him the project is dope as if you can do every thing he di be nice next time😡
ok mariasantos?😤
@@mahibala476 wym?
BBr tf wrong with you? 💀
Your idea is cool👍👌
nice work my friend
hello do you have the design for 3D printer? it would be very useful
Loooks like an obstacle avoiding car with 2 wheels
I hope I could make it. But your progect is great 💯💯💯
My teacher and i like very interesting
Bro,, I am going to make a walking, speaking robot... But I am failing in my programming at Walking part..... Do you know creating about aurdiono programming?
Search it up on google, search up as many as you can, then compare those to yours, you will know where did u failed.
Amazing project, sir
Thanks
I like it. I am working on something similar. Automation using sonic sensors. Great video!
That's awesome!
Wow I like your robot
Can anyone help I tried making this for science exbition using power bank etc.. but it's servo motor is working but the it is not moving
Open servo and give supply to the motors
@Are created I made the obstacle avoiding car by the same channel
Anyway thanks
What are you using to add weight to the rear for balance and to keep it leaning back. Is that another 18650?
خ
I noticed that too, it looks like another battery
Super arduino project 👌
U making tutorial is googd😁😁🤗🤗🤗🤗
Can you control this via Bluetooth with a phone or PS4 controller? I've seen that you can add a Bluetooth module to Arduino Uno but where would I find the code and "how to" in order to make it remote controlled? Thank you!
How to attach the switch to turn it on?
I’m am new to this and have never touched a Robot piece ever lol. But I wanna get started. Can someone tell me what all these parts do.
Go study electrical engineering maybe? I don't know too
AWESOME 👌🏻
Wow it is very amazing
Sir would you please help. I bought everything mentioned In the video and connected all the connections you showed in the video but somehow the TT gear motors are not working although they work fine when connected separately with a battery. All other components seem fine, the servo is rotating and everything.
If it helps I uploaded the code to arduino before connecting everything.
Also I am using 4 AA 1.5 V batteries.
Arduino move with 5v battery use a battery not cell
@@lakshaykapoor1591 thank you for your suggestion, I will try to use a higher voltage battery perhaps a 9V battery or two 3.7 V batteries
@@hamayunkhan4781 use 9v. The arduino uses 5v but use 9v. It works :D
@@hamayunkhan4781 did it work?
Here is some simple code to program your robot.
// Define motor pins
const int leftMotorPin1 = 2;
const int leftMotorPin2 = 3;
const int rightMotorPin1 = 4;
const int rightMotorPin2 = 5;
void setup() {
// Set motor pins as outputs
pinMode(leftMotorPin1, OUTPUT);
pinMode(leftMotorPin2, OUTPUT);
pinMode(rightMotorPin1, OUTPUT);
pinMode(rightMotorPin2, OUTPUT);
}
void loop() {
// Move forward
moveForward();
delay(2000); // Move forward for 2 seconds
// Move backward
moveBackward();
delay(2000); // Move backward for 2 seconds
// Turn left
turnLeft();
delay(1000); // Turn left for 1 second
// Turn right
turnRight();
delay(1000); // Turn right for 1 second
}
void moveForward() {
digitalWrite(leftMotorPin1, HIGH);
digitalWrite(leftMotorPin2, LOW);
digitalWrite(rightMotorPin1, HIGH);
digitalWrite(rightMotorPin2, LOW);
}
void moveBackward() {
digitalWrite(leftMotorPin1, LOW);
digitalWrite(leftMotorPin2, HIGH);
digitalWrite(rightMotorPin1, LOW);
digitalWrite(rightMotorPin2, HIGH);
}
void turnLeft() {
digitalWrite(leftMotorPin1, LOW);
digitalWrite(leftMotorPin2, HIGH);
digitalWrite(rightMotorPin1, HIGH);
digitalWrite(rightMotorPin2, LOW);
}
void turnRight() {
digitalWrite(leftMotorPin1, HIGH);
digitalWrite(leftMotorPin2, LOW);
digitalWrite(rightMotorPin1, LOW);
digitalWrite(rightMotorPin2, HIGH);
}
Thank you very much bro🎉
How you got pins in +5gnd and AO-5?? My motor driver don't have those pins. please tell fast
That is perfect for mazes
Hello sir
When you plug the USB in do you have to download anything
Pls reply
Saving money from eight months want to make parents proud
not your parents but I’m proud of you :)
me too
Bro plz show the programming part man it's almost impossible to use it without program
I have updated the links
Can you tell me any three uses please
@@DIYBuilder please can you tell me any three uses please
@@DIYBuilder give me the code
@@jayeshchavan3103 why do you need to know 3 uses? Leave the guy alone
بارك الله فيك فركة حلوة احسنت👍👍👍
Cool !!!!👏👏👏
Hi , please I have a question , I'm new in this wonderful field , I already learned C++ language and I'm now learning python language , is it enough to be able to build an Arduino robot ?
And thank you .
yes it is dw about it,,even just c++ is enough
@@angeldust_4518 ok thank you !
How to attach the switch to turn it on?
Fue muy bueno tu proyecto, pero ¿no compartiste el código fuente?
In description
hello bro in this project which wire did u solder in the gear motor?
THX for my homework
*Bro its important* I have science exhibition 14 December, and I need to make this bro.. tell me that;
Will it work for sure?
Good as 9th grade project?
I don't want to waste money! Please reply so that I can order parts
it works just made it
Which level science exhibition?
@@caeksafar i asked... which level.. like nationals, regionals or school .. i didnt ask grade
hi bro i am the channel holders brother this video is fake
I'm also 9th grade
"Please tell me the app to access the code."
ty for sharing this info
Super tutorial. I got it working. I had to get the header pins soldered by my mobile phone repair man. I am extremely bad at soldering. But its a neat bot with no loose wires. Thanks!
The motor has pieces on either side to attach wheels to, so did you cut off one part so you can glue it to the battery pack.
@@UnknownSend3r if you mean shaft. I used a single shaft motor.
Bro can we first upload the code to the board .if the code is uploaded without error than can we attach the motor,servo,ultrasonic sensor. Bro saa fast please
I think that you can, but you may need to make some modifications if you are not exactly following the tutorial. If u are using a servo motor or something, you will need to change that. If you are doing exactly what the video is doing that yes, you should be able to upload the code first.
A king request for you. Could you please share me the program or code for doing this project.
It is in the description
Honestly worth to watch ur videos but please do explain the logic why we r using these parts and suggest alternatives for these parts, and keeping going u r doing good job
Bro soon i will start voice over videos where i will explain every details
@@DIYBuilder Whats the use of that robot sir?
For some reason it only drives one wheel forward... both wheels move when it adjusts course but when it wants to go straight forward again it just runs in circles... any ideas?
Brother can u make some thing different and difficult
tell me your idea
@@DIYBuilder can you add something like a vacuum cleaner or anything that would make the robot useful
@@muhammadalvi1514 does it work?
The next will be portal gun
Love from Bangladesh
I have a query, for 2 motors also, you needed motor driver, could it be made without motor driver?
Arduino: 1.8.12 (Windows 10), Board: "Arduino Uno"
Sketch uses 3908 bytes (12%) of program storage space. Maximum is 32256 bytes.
Global variables use 87 bytes (4%) of dynamic memory, leaving 1961 bytes for local variables. Maximum is 2048 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
-Thats what shows everytime i upload it.. can someone help me?
\
Go to new and upload a blank file then try..
@@sujankgowda1119 bro how to install lib
Really late, but try changing the port. It worked for me
Not new same function as old obstackle avoiding car
Hi.....I ordered all the parts from the links u shared but after connecting battery to motorshield, nothing else is getting powered on
Bro u make it amazing😎 but please how to compile and download necessary library iam beginner 😅 , and now this was before 4 years , i miss those old days
What steps would you have to make to modify this robot and allow it to receive voice control inputs?
Can you please make a robot only using: an arduino uno, jumper wires, 2 servo motors with any kind of horns, a SR04, 2 wheels, an on off switch, and a battery pack?
I build this robot and it works
Thank you bro
Hi, I bought all the parts and everything, did all the wiring correctly but for some reason its not working. The servo motor only moves and the motor driver shield powers on, makes a noise and keeps reconnecting. I’m also using a 9V battery. I would appreciate it a ton if someone could help as to why it’s not working for me (please reply asap). Thank you
Edit: I fixed it. I just attached five 1.5V batteries with a switch and it worked. Seems like it was an overdose of voltage before. Btw, you should update the code cuz in the video it’s different as you commented out the other 2 motors.
Avery good project to learn arduino robotics
Thanks DIY Builder you help very much😃😄
Most Welcome
U could have used mpu 6050 accelerometer with gyro to balance the robot
You are a robot god
Great video! thanks!
Glad you liked it!
Wonderful Robot car bro
I am going to try and make this robot. Can you please tell me what I can use instead of acrylic sheet??
Niyamai
Excellent videos bro
hi bro amazing video i make it for my science project bro
Wow🌟♥️
Wow i love it
I would like voice over instruction. That's my 2 cents, do with it what you will.
The place from you buy things are way cheaper than Amazon . Thanks for giving the link you are great . I also want to make Arduino projects like you🙂🙂🙂😉
Most welcome 😊
@@DIYBuilder please tell me, when i start the robot its only one wheel is moving other not, please tell me how can i resolve this issue... Its urgent
@@ramkumarmishra2940 is it working now
Your are very genius Engineer, plz bro You should make a Fly spy drone with HD camera and with remote control Like bee or fly drone
Bro I have a question what is that in the TT motor the wire you stick in that from where. To bring that and all the wires like that please help me and if you can please send me the link of it I am requesting you please bro please
Really helpful...thanks a lot
Thanks
who are watching this video to make science project for science exhibition😄😄👇
Hey, can I do it without the driver and does it work with aa batteries
Awesome you r perfect👍👍👍👍
thanks
@DIY BUILDER
Please which software did you use to create the software diagrams
verry good and great
Awesome robot