Video není dostupné.
Omlouváme se.
Epson XP-245 Wifi WPS Setup
Vložit
- čas přidán 5. 10. 2017
- How to connect the Epson XP-245 to your Wi-Fi using the WPS method.
1] With the printer on, press and hold the Wi-Fi button for around 3 seconds.
2] The Wi-Fi light will now begin to flash.
3] On your router press the WPS button.
4] Some routers may need to you to hold the button for a few seconds.
5] It may take some time for the printer to connect.
6] Eventually, the Wi-Fi light should become a solid green to indicate it is connected.
7] You can press the "info" button to print out a report.
8] This will confirm whether is it connected.
9] This process only connects the printer to your Wi-Fi, it does not install it on your devices.
The instructions are similar for the following printers:
Epson XP-200, XP-205, XP-211, XP-215, XP-220, XP-225, XP-235, XP-243, XP-247, XP-255, XP-257
This video actually helped me with my connection. I recently moved house, and in the process changed router. I couldn't work out on my computer or via my Epson iPhone app how to update my connection with the new router, even though I had gone through the online manual and checked the Epson site. I mean seriously, I kept searching for internet connection and it gave instructions that I didn't understand - and in all honesty were not relevant (now that I know what the solution was). I updated all of my software, etc, but in the end I just needed to re-establish my internet connection. As you can probably gather, I am not technically savvy. I preferred when I could print from my phone, without the need to use the Epson App. I have had three Epson printers, and I feel they have made it more difficult to use through the changes they have made over the years. But for now, I've got it working again, thanks to the help from this video.
I have the same problem
The manuals are so hard to understand. I wouldn't have gotten my printer to work without you. Keep up the great work!
Was close to tears of frustration trying to print out fight tickets and couldn't figure out how to connect printer to new Sky router - I'm old and not IT smart. So very easy after watching this - couple of minutes and its done. Thank you.
I couldn't agree more with you!
I tried a few times, didn't work at first, I reset my router and tried again, I PRESSED the WPS button on my router rather than holding it, and it worked :) this printer has been the bane of my life!
we spent like 5 hours yesterday messing about trying to get it to go. now i seen this video and when my mother wakes up we are going to try this.. thank you so much :)
This video is something great. I have looked for a tutorial or a manual to follow, but they were so difficult to understand. This video helped me in 2 minutes, so I have to thank you. Wow!
Your video (among the hours of googling, reading and watching USELESS YT videos) HAS HELPED with my Brother printer. Thank you so much 😊
Got a box with new printer Epson WF-2010W with A CD!!! Are they for real!? First bad sign. As I thought everything else was a nightmare of experience, reminded me of my youth PC days, where you have to be an IT deparetment and everything was a mission. Their website is useless, their videos are nonsense. Yours helped in 2 minuts. Thank you very much and keep up the good work! Grateful!
Really thanks. I was stuck with manual for an hour and this clip solved me in 2 minutes
After seeing so many videos, you are the best & Fastest to connect wifi
It took a while to connect. After reading the comments started to loose hope. Had to reset my router 100 time due to internet not being available. Had to google if there is a WPS button on my router but the video helped to get it all set up!
Wasted 6 hours trying to connect mine. Still will not connect. First and last time I buy Epson. Wasted my weekend :(
Worst printer ever
Took me like 3 minutes, idk what u guys doing
Grazie mille,da 1h e mezza ci provavo con la up di epson e niente risultati 🤦♀️grazie al tuo video ci sono riuscita in 2minuti 👏👏👏
OMG! Thank you so much for this video. It actually worked! you have no idea how much i struggled to make it work before. Huge thank you!!!
Thank you. It worked for me. It took a few minutes to connect and I needed to move close to the router. Initially I had green and orange line at the same time but after I switched off the printer and on again there was green light only and scanning worked perfectly.
WPS = Wi-Fi Protected Setup must be allowed on your router. Some routers like mine (EE / Orange box) must have this allowed (probably for extra security): I had to log in the router go to Advanced/Wireless Settings/Wi-Fi Protected Setup/ and tick radio-button "Enable". Also the button could be less obvious than the BT example in the video (on my box it is stealthily blended as a tongue rather than a button in the top-middle-back part of the router).
Thank you so much. This was super easy and fixed my printer in 2 mins :)
Horrible unintuitive printer but this video got the wifi working between printer and computer on a new network so thumbs up!
this is what CZcams is for THUMBS UP!
Can't believe I stumbled on this video again, after having forgot how to do this on yet another occasion. 😄
Dank diesem Video habe ich es geschafft eine Internetverbinung wieder herzustellen danke
I have an issue, holding down the wifi button for those 3 seconds doesnt do anything. No light comes on on the printer. Regardless of how long I hold the button down for.
Hi Nicole, I have the exact same problem. Did you find a solution?
Thanks
@@thefoodandlife me to now 😂 did you end up finding a solution ?
Merci à toi tu m'as sauvé la vie grâce à toi j'ai retrouvé le wifi de mon imprimante continuer sur CZcams tu es excellent😘
Logan ! pas moi ça fait des semaines que j'essaie de la connecter à ma box rien n'y fait et c'est ainsi depuis que j'ai changé de fournisseur internet !
@@LolSoPff bizarre moi je suis chez Orange et pour moi ça marche parfaitement si ça ne marche pas pour vous il y a un gros problème dites-moi chez quel opérateur vous êtes
I did what you said but I’d didn’t connect it started flashing like in the video but still won’t connect help please
Thank you so much! this worked like a charm!!!
Extremely easy to configure, worked on the first go.
when i press the wps button on my router, my printer light blinks only orange.
The music in this is actually so sublime tho
I've tried this like 9 times until the red and green leds both flashed at the same time. Then i turned it off and on again and now it actually works.
GRAZIE ...MOLTO UTILE...SONO RIUSCITA A COLLEGARE LA MIA STAMPANTE
Epson XP-255.Thanks for video.Setup work for this printer well.Was done in seconds
Not every router has a WPS button...
Worked. Saved my life! Thx
Thanks! Got the wifi working on the printer. Will like!
And if your router doesn't have a WPS button?
Same issue here
lildecable WPS is the pair button
I had this issue as well - it may appears as the infinity symbol on the back of your modem
And if you dont have a router?
Thank you. Worked a treat after trying for ages via Epsom Installation!!!
The epson installation "guide" is just the worst piece of software I've encountered in a while. I'm never buying another epson product.
Fully agree. Epson is a total piece of SHIT
What I must to do, if «WiFi» doesn't flashing a time as need. A few moments and dark: no green or orange.
Bless your hart dude. This video is the best. May I make an add to this one? On the more mondern routers the WPS reset button looks like two arrows (🔃) ... this is what stood me up. Good luck and stay patient.
mersi mult.foarte bine explicat si simplu
Thank you very much... This video is very helpful to me.
Glad it was helpful!
Very , very helpful a big thumbs up
Thank you
Please can u help me,when I pressed the wifi button the light wont come on,just at the start when I turn the whole printer on the wifi light goes green,red,green,red,green,red and then blank
Hi did you sort it as I have the same problem
@@ayshiaholyhead5123 sorry but no
@@themrseed2070
I just changed the ink and it has finally connected, I just carnt get it to connect to my app now 🤷♀️
@@ayshiaholyhead5123 so complicated stuff
Great video we have an SX235W and couldn't get it to work, found the wireless first time following this vid.
Thank you so much for this video 👍
Thank you very much you saving my day anche my machine !!!
WiFi light won't flash
That’s my problem too !!
@@pinkpixie1204 do u have a solution?
Thank you so much, I'm a new follower your.
Always be happy.
Thanks, I got an XP202 given to me with no manual! This happens to be the same process
thank you it's very easy with your video ;)
Thaks so much, it worked a treat
Thanks a lot , Worked a treat!
Thanks! Useful video - been having a nightmare with ours!
thanks you helped me
Thank you, very helpful
Awesome thank you, worked for me.
Glad it helped
tip, i was getting a FAIl (RED LIGHT.) Until i reset my Hub.
Then it instantly went GREEN.
Thank you! Now to try and print lol
👍👍👍👍👍👍👍geweldig duidelijk
شكرا حعلها الله في ميزان حسناتك
worked for me thank you so much buddy
For the Epson 257 you have to hold the wifi button down then after three seconds, press the button next to it
This didn't work for me but i used the instructions on the Epson iprint app for Wi-Fi Direct Set-up and chose the printer without lcd screen option and it worked.
Thank you for the video, I nearly just smashed mine against a wall!!
Worst fucking instructions for anything clear as shity water in a bucket
Yeah...me too!! Frustrated for 2 hrs
Me too, the Epson instructions are the opposite of instructions, but in the other hand, is one great piece of technology! Awesome product for the price.
Same...my wifi light won't turn on and im pressing the wps on the router and the wifi button? Anybody that can help would be greatly appreciated, driving me insane...1.5 hours later!
Alistair Mccafferty going through WPS worked for me, teu that.
Does it matter that my router is upstairs and my printer downstairs? The report said my signal strength was poor and says to check the SSID and password but there is no where for me to do this it wont show up on my laptop the printer?
Thank you ..thank you ..thank you , got my printer going 👍👍👍👍
I tried this on my Epson XP-205 and the lights stopped blinking but the orange light remained solidly on, no green light. Any ideas, please?
Do you know why the Wi-Fi light doesn't on when i presse the Wi-Fi button during 3 seconds ?
This is absolutely perfect instruction and should absolutely work, but it isn't for me. For whatever reason, the wifi connection lights work fine when you turn the printer on, but even after pushing the WPS button on the router, it just won't connect. I don't know what else to try short of wiring it, but I need to put the printer way further than a wired connection will work for.
Thanks for this video...life saver
Thanks heaps, as I didn't know about pressing the button on the modem. However, even though my printer now shows a green light, my computer still won't print to the printer. ??? Any suggestions, anyone?
Hi, what if you don't get the lights response after pressing wifi button for 3 seconds?
Does the printer need to be connected to a laptop or pc to do this
simple y rapido muchisimas gracias!!!!!!! GENIAAAAAAL
thanks for the support video
Thank you for your help 👌
Hi my router doesn’t have a VPS button is there any other way I can connect it?
Thanks alot it worked.👍👋👌👏
I do not have access to the WiFi router as I am in barracks. And this seems to be the only solution other than a USB which is not in the packaging and I have no time to get one currently. Any solutions?
Thank you so so much.
Does this printer support AirPrint iPhone? Cause my iPhone cannot find. Says there is no device for AirPrint. For iMac I haven't installed any app. Just did as you show on the vide. But it seems like for iPhone I need install the app. Correct?
What does it mean if it’s staying orange and no green
For some reason this hasn't worked. Any advice on what to try
No wps button??
Not clear instructions. Should we press and hold the WPS button after pressing the Wifi Button? If this is the case my arm is going to have to stretch a fair bit from from office basement to the router upstairs!
Can u scan pictures on this model too??
Thx for information 🙏
Hi :) I have the same one. It makes a bad sound when it's printing. Why ?
do i have to hold the wps till
it get connected ????
Needed to install ink & paper before wifi could be setup. Drove me crazy that this workflow issue was the problem.
Thanks worked a dream. 5 stars to you
Thank you.
When I press the WiFi button on the printer nothing happens. Have turned the printer on and off several times. Any suggestions?
Have you added the ink cartridges first?
The printer flashes but then stops, when I go to hold the WiFi button down for 3 seconds, nothing happens, I have already pressed on the router , any suggestions please ?
Thanks for the video helped me a lot
Thank you. Very good!!!
gracias por el tutorial. me funciono bien en mi epson tx-200
Thank you. Perfect
Wps key not working ,then what method?
Can anyone help ? I have this printer and at my old house it’s been synced to my old sky router ! I’ve now moved house and have a Bt router ! It always looks for the sky router hence it can never connect ! How do I fix this ?
Thank you so much!!!
Hi, I have a problem with my printer, I have installed a new router, so the name and the password have changed and the printer doesn't connect even following the steps shown.
Many thanks
Is there a way to connect the printer to WiFi in sharing accommodation? I live in student halls so I do not have access to the WiFi router.